Solar energy, a prominent renewable resource, relies on photovoltaic systems (PVS) to capture energy efficiently. The challenge lies in maximizing power generation, which fluctuates due to changing environmental conditions like irradiance and temperature. Maximum Power Point Tracking (MPPT) techniques have been developed to optimize PVS output. Among these, the incremental conductance (INC) method is widely recognized. However, adapting INC to varying environmental conditions remains a challenge. This study introduces an innovative approach to adaptive MPPT for grid-connected PVS, enhancing classical INC by integrating a PID controller updated through a fuzzy self-tuning controller (INC-FST). INC-FST dynamically regulates the boost converter signal, connecting the PVS’s DC output to the grid-connected inverter. A comprehensive evaluation, comparing the proposed adaptive MPPT technique (INC-FST) with conventional MPPT methods such as INC, Perturb & Observe (P&O), and INC Fuzzy Logic (INC-FL), was conducted. Metrics assessed include current, voltage, efficiency, power, and DC bus voltage under different climate scenarios. The proposed MPPT-INC-FST algorithm demonstrated superior efficiency, achieving 99.80%, 99.76%, and 99.73% for three distinct climate scenarios. Furthermore, the comparative analysis highlighted its precision in terms of control indices, minimizing overshoot, reducing rise time, and maximizing PVS power output.

Fatty liver disease is considered a critical illness that should be diagnosed and detected at an early stage. In advanced stages, liver cancer or cirrhosis arise, and to identify this disease, radiologists commonly use ultrasound images. However, because of their low quality, radiologists found it challenging to recognize this disease using ultrasonic images. To avoid this problem, a Computer-Aided Diagnosis technique is developed in the current study, using Machine Learning Algorithms and a voting-based classifier to categorize liver tissues as being fatty or normal, based on extracting ultrasound image features and a voting-based classifier. Four main contributions are provided by our developed method: firstly, the classification of liver images is achieved as normal or fatty without a segmentation phase. Secondly, compared to our proposed work, the dataset in previous works was insufficient. A combination of 26 features is the third contribution. Based on the proposed methods, the extracted features are Gray-Level Co-Occurrence Matrix (GLCM) and First-Order Statistics (FOS). The fourth contribution is the voting classifier used to determine the liver tissue type. Several trials have been performed by examining the voting-based classifier and J48 algorithm on a dataset. The obtained TP, TN, FP, and FN were 94.28%, 97.14%, 5.71%, and 2.85%, respectively. The achieved precision, sensitivity, specificity, and F1-score were 94.28%, 97.05%, 94.44%, and 95.64%, respectively. The achieved classification accuracy using a voting-based classifier was 95.71% and in the case of using the J48 algorithm was 93.12%. The proposed work achieved a high performance compared with the research works.

A growing attention is given to exploiting Photoplethysmography (PPG) signals in non-invasively measuring of many physiological vital signs. Many machine deep learning models were trained for predicting the continuous arterial blood pressure (ABP) or just the systolic and diastolic blood pressure (BP) values based on a public database. However, jointly cleaning the PPG-ABP dataset that is the most critical pre-processing step for training quality is still in need for more investigations. There is a considerable amount of anomaly data that has to be excluded before any training stage. This paper introduces a two-level joint PPG-ABP cleaning technique conducted in a signal level and per-beat level. Many quality metrics have been checked successively for excluding improper data. These metrics achieve a coarse cleaning step. Finally, principal component analysis (PCA) is exploited for fine cleaning the remaining data from the former stage. The cleaning efficiency is evaluated by measuring its impact on the deep-learning-based BP estimation models. The trained model based on our cleaned data shows performance enhancement in terms of prediction error and the correlation between the predicted and ground-truth BP. Segmented and cleaned PPG/ABP dataset will be publicly available in both signal level and beat level. Based on the simulation results, the proposed cleaning technique enhances standard deviation of the prediction error of systolic and diastolic blood pressure by 11.68 % and 10.81 %, respectively. Also, it enhances mean absolute error of the prediction of systolic and diastolic blood pressure by 14.79 % and 11.70 %, respectively.

This paper suggests an adaptive control approach using water cycle algorithm optimization method (WCA) modified by a new technique called "Balloon Effect". The main concept of Balloon Effect is to increase the ability of the WCA to tune individually the gains of the controller online. The proposed technique has been used to tune the gains of PID controller and applied to control both of the load frequency control in micro-grid power system (which minimize the fundamental frequency variations) and the position of armature-controlled DC motor. Digital simulations have been carried out to prove the efficiency of the proposed adaptive controller-based WCA with Balloon Effect. The obtained results showed that the proposed adaptive controller maintains robust performance, and effectively reduces the impact of identified disturbances and uncertainties.

In this paper, an enhanced version of whale optimization algorithm (EWOA) is presented to be applied in adaptive control techniques as a parameter tuner. One weakness point in this control scheme is the low efficiency of its objective function. Balloon effect (BE) is a modification introduced to increase the efficiency of the objective function of the optimization method and the ability of the controller to deal with system problems increase consequently. Controlling of the temperature of electric furnaces is considered as one of the important issues in several industrial applications. Conventional controllers such as PID controller cannot deal efficiently with the problem of parameters variations and step disturbance. This paper proposes an adaptive controller, in which the gain of the temperature controller is tuned online using EWOA supported by balloon effect. System responses obtained by the proposed adaptive control scheme using EWOA + BE have been compared with an electric furnace temperature control (EFTC) scheme response using both the PID controller-based modified flower pollination algorithm (MoFPA) and PID-accelerated PIDA-based MoFPA. From the results, it can be observed that the proposed controller tuned by the EWOA + BE method improves the time performance compared with the other techniques (PID and PIDA-based MoFPA) in case of EFTC application.

Currently, learning physiological vital signs such as blood pressure (BP), hemoglobin levels, and oxygen saturation, from Photoplethysmography (PPG) signal, is receiving more attention. Despite successive progress that has been made so far, continuously revealing new aspects characterizes that field as a rich research topic. It includes a diverse number of critical points represented in signal denoising, data cleaning, employed features, feature format, feature selection, feature domain, model structure, problem formulation (regression or classification), and model combinations. It is worth noting that extensive research efforts are devoted to utilizing different variants of machine learning and deep learning models while transfer learning is not fully explored yet. So, in this paper, we are introducing a per-beat rPPG-to-BP mapping scheme based on transfer learning. An interesting representation of a 1-D PPG signal as a 2-D image is proposed for enabling powerful off-the-shelf image-based models through transfer learning. It resolves limitations about training data size due to strict data cleaning. Also, it enhances model generalization by exploiting underlying excellent feature extraction. Moreover, non-uniform data distribution (data skewness) is partially resolved by introducing logarithmic transformation. Furthermore, double cleaning is applied for training contact PPG data and testing rPPG beats as well. The quality of the segmented beats is tested by checking some of the related quality metrics. Hence, the prediction reliability is enhanced by excluding deformed beats. Varying rPPG quality is relaxed by selecting beats during intervals of the highest signal strength. Based on the experimental results, the proposed system outperforms the state-of-the-art systems in the sense of mean absolute error (MAE) and standard deviation (STD). STD for the test data is decreased to 5.4782 and 3.8539 for SBP and DBP, respectively. Also, MAE decreased to 2.3453 and 1.6854 for SBP and DBP, respectively. Moreover, the results for BP estimation from real video reveal that the STD reaches 8.027882 and 6.013052 for SBP and DBP, respectively. Also, MAE for the estimated BP from real videos reaches 7.052803 and 5.616028 for SBP and DBP, respectively. Graphical Proposed camera-based blood pressure monitoring system