In this work, we report the synthesis and detailed characterization of single-domain, optically active, manganese-substituted cobalt ferrite (CoFe2O4) magnetic nanoparticles without any surface functionalization as prospective fluorescent probes for bio-imaging.
We have developed a high precision (3.7 mK) temperature sensor using nanomagnetic fluid bearing. The device is based on the basic principle of Charles law (v ∝ T). For this, we have prepared kerosene-based magnetic fluid for ferrofluid bearing formation with permanent magnet. The ferrofluid bearing has very low coefficient of friction (μ f = 0.002), and provides a frictionless movement and perfect sealing. The device is highly sensitive as it uses air as a working media whose coefficient of volume expansion (0.0036) is much larger (20 times) than mercury (0.00018), ethanol (0.00026), and so on usually used in expansion-based thermometers. At constant atmospheric pressure (1 atm), a temperature variation of 1°C causes a variation of 20 mm (capillary diameter 5 mm) in the position of fluid column. The device has been calibrated and tested using standard calibrated equipment's. The device shows the high sensitivity of 3.7 (± 0.2) mK and can be used where high accuracy in temperature measurements is required. The device sensitivity and range is easily customizable. The device is capable of finding many useful applications, viz., standards and the calibration of thermometers.
1 February 2018 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
The present work reports the synthesis of a stable aqueous magnetic fluid (AMF) by dispersing double-surfactant-coated Fe3O4 magnetic nanoparticles (MNPs) in water using a facile ambient scalable wet chemical route. MNPs do not disperse well in water, resulting in low stability. This was improved by dispersing double-surfactant (oleic acid and sodium oleate)-coated MNPs in water, where cross-linking between the surfactants improves the stability of the AMFs. The stability was probed by rheological measurements and all the AMF samples showed a good long-term stability and stability against a gradient magnetic field. Further, the microwave spin resonance behavior of AMFs was studied in detail by corroborating the experimental results obtained from the ferromagnetic resonance (FMR) technique to theoretical predictions by appropriate fittings. A broad spectrum was perceived for AMFs which indicates strong ferromagnetic characteristics. The resonance field shifted to higher magnetic field values with the decrease in particle size as larger-size MNPs magnetize and demagnetize more easily since their magnetic spins can align in the field direction more definitely. The FMR spectra was fitted to obtain various spin resonance parameters. The asymmetric shapes of the FMR spectra were observed with a decrease in particle sizes, which indicates an increase in relaxation time. The relaxation time increased with a decrease in particle sizes (sample A to D) from 37.2779 ps to 42.8301 ps. Further, a detailed investigation of the structural, morphological, and dc magnetic properties of the AMF samples was performed. Room temperature dc magnetic measurements confirmed the superparamagnetic (SPM) characteristics of the AMF and the M-H plot for each sample was fitted with a Langevin function to obtain the domain magnetization, permeability, and hydrodynamic diameter of the MNPs. The saturation magnetization and coercivity of the AMF samples increased with the increase in dispersed MNPs’ size of the samples. The improvement in the stability and magnetic characteristics makes AMFs suitable candidates for various biomedical applications such as drug delivery, magnetic fluid hyperthermia, and biomedicines.