Fujun Wang

Dr. Fujun Wang

School of Mechanical Engineering, Tianjin University, Tianjin 300072, China

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 December 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
FWFujun Wang
Fujun Wang
ZHZhichen Huo
Zhichen Huo
CLCunman Liang
Cunman Liang
BSBeichao Shi
Beichao Shi
YTYanling Tian
Yanling Tian
DZDawei Zhang
Dawei Zhang
This paper presents a novel actuator-internal two degree-of-freedom (2-DOF) micro/nano positioning stage actuated by piezoelectric (PZT) actuators, which can be used as a fine actuation part in dual-stage system. To compensate the positioning error of coarse stage and achieve a large motion stroke, a symmetrical structure with an arch-shape bridge-type amplifier based on single notch circular flexure hinges is proposed and utilized in the positioning stage. Due to the compound bridge arm configuration and compact flexure hinge structure, the amplification mechanism can realize high lateral stiffness and compact structure simultaneously, which is of great importance to protect PZT actuators. The amplification mechanism is integrated into the decoupling mechanism to improve compactness, and to produce decoupled motion in X- and Y-axes. An analytical model is established to explore the static and dynamic characteristics, and the geometric parameters are optimized. The performance of the positioning stage is evaluated through finite element analysis and experimental test. The results indicate that the stage can implement 2-DOF decoupled motion with a travel range of 55.4 × 53.2 μm 2 , and the motion resolution is 8 nm. The stage can be used in probe tip-based micro/nano scratching.

17 February 2020 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
YTYanling Tian
Yanling Tian
ZLZhilai Lu
Zhilai Lu
FWFujun Wang
Fujun Wang
CZChongkai Zhou
Chongkai Zhou
YMYue Ma
Yue Ma
DZDawei Zhang
Dawei Zhang

17 January 2019 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
FWFujun Wang
Fujun Wang
BSBeichao Shi
Beichao Shi
YTYanling Tian
Yanling Tian
ZHZhichen Huo
Zhichen Huo
XZXingyu Zhao
Xingyu Zhao
DZDawei Zhang
Dawei Zhang
This paper presents a novel piezoelectrically actuated dual-axis micro manipulator with an asymmetric compliant structure. The mechanical design of the micro manipulator is first presented. A novel guiding bridge (GB)-type mechanism was proposed and utilized in the left part of the micro manipulator to improve the dynamic performance of the micro manipulator. The analytical model has been established based on pseudo-rigid-body (PRB) model and matrix-based compliance modeling (MCM) method. The kinematic and the precision of the micro manipulator have been analyzed, and the input and output couplings have been investigated. The prototype of the micro manipulator has been fabricated by wire electro discharge machining (WEDM). Then, open-loop experimental tests have been performed. The experimental results match well with the analytical calculation, and the amplification ratios are 11.12 and 4.64 for the left part and right part, respectively. Proportional-integral (PI) controller has been used to regulate the output displacement and grasping force, and a series of closed-loop experiments have been conducted to investigate the performance of the micro manipulator. The results show that the position resolution for both the right and left parts is 0.15 μm, and the force resolution is 4 mN.

22 August 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CLCunman Liang
Cunman Liang
FWFujun Wang
Fujun Wang
ZHZhichen Huo
Zhichen Huo
BSBeichao Shi
Beichao Shi
YTYanling Tian
Yanling Tian
DZDawei Zhang
Dawei Zhang
To realize high precision rotation angle adjustment in micro/nano manipulation, a novel monolithic 2- degree of freedom (DOF) pure rotation platform is designed, fabricated and tested in this paper. The rotation platform is driven by two piezoelectric (PZT) actuators. Rotation decoupling is realized based on three Hooke's joints and a large rotation range is obtained based on two bridge-type mechanisms. Compared with other rotation platforms, the developed 2-DOF pure rotation platform has the advantages of fewer actuators due to rotation decoupling design and larger working frequency range due to compact structure and monolithic fabrication. An analytical model is established to calculate transmission ratio and input stiffness. The dominant parameters are determined based on sensitivity analysis. Finite element analysis (FEA) is conducted to investigate the characteristics of the rotation platform. Experimental tests are carried out to investigate the performance of the rotation platform. Decoupling test results show the maximum rotation angles in X- and Y- axes are 2.04 mrad and 2.12 mrad, respectively, and the X- and Y- axes relative coupling errors are 2.03% and 2.09%, respectively. Closed loop control results show that the settling time is 40 ms and the resolutions in X- and Y- axes are both 5 μrad.

29 October 2020 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
ZLZhu Liu
Zhu Liu
FWFujun Wang
Fujun Wang
SLShoufeng Liu
Shoufeng Liu
YTYanling Tian
Yanling Tian
DZDawei Zhang
Dawei Zhang
This paper presents an analytical model for soft pneumatic network actuators (PneuNets) consisting of a series of chambers made of elastomeric material and an inextensible bottom layer. The model links the input pressure with the bending angle in free space and the tip force of the PneuNets. The bending principle of the PneuNets is comprehensively analyzed through the analytical model. The bending angle of PneuNets is analyzed considering the deflection of the gap layer. The tip force of PneuNets is analyzed considering the equilibrium moment of the PneuNets at the applied pressure. This paper focuses on the deformation of the gap layer of the PneuNets and the effect of gap length on the bending angle. The proposed model considers the deformation of the lateral wall of the chamber as the deformation of the nonlinear hyperelastic membrane. Futhermore, the contact moment is included considering the Hertzian contact between the adjacent chambers. Finite element analysis and physical experiments are carried out and the results show that the bending angle and tip force of the PneuNets can be effectively predicted by the analytical model with an error of less than 10%.

7 December 2021 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
ZHZhichen Huo
Zhichen Huo
YTYanling Tian
Yanling Tian
FWFujun Wang
Fujun Wang
WZWei Zhang
Wei Zhang
BSBeichao Shi
Beichao Shi
DZDawei Zhang
Dawei Zhang
Aiming at the realization of high precision angle adjusting, this article proposed a rotary platform based on stick-slip principle, which adopted a dual-driven working mode to realize large circular motion stroke and high loading capacity. Based on flexure hinges, a symmetrical flexible mechanism with two driving feet was designed to generate coupled driving displacement. By actuating the piezoelectrics alternatively, the proposed dual-driven working principle was described in detail, which could effectively suppress the back-off phenomenon and improve loading capacity. The theoretical analysis and finite element simulation were conducted to investigate the characteristic of flexible driving unit. The dynamic model of dual-driven working mode was established and simulated in MATLAB/Simulink, and the influence of preloading coefficient and initial preloading force were investigated, which provided a guidance for the design and optimization of stick-slip actuator. Additionally, a prototype was fabricated, and a series of experiments were conducted. The results indicated that the maximum rotary speed and loading capacity of rotary platform were 48.3 mrad/s and 98.8 mN·m, respectively.