Zhichen Huo

Zhichen Huo

Auto-generated profile, based on publicly available information

Zhichen Huo

Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, School of Mechanical Engineering, Tianjin University, Tianjin, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 January 2019 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
FWFujun Wang
Fujun Wang
BSBeichao Shi
Beichao Shi
YTYanling Tian
Yanling Tian
ZHZhichen Huo
Zhichen Huo
XZXingyu Zhao
Xingyu Zhao
DZDawei Zhang
Dawei Zhang
This paper presents a novel piezoelectrically actuated dual-axis micro manipulator with an asymmetric compliant structure. The mechanical design of the micro manipulator is first presented. A novel guiding bridge (GB)-type mechanism was proposed and utilized in the left part of the micro manipulator to improve the dynamic performance of the micro manipulator. The analytical model has been established based on pseudo-rigid-body (PRB) model and matrix-based compliance modeling (MCM) method. The kinematic and the precision of the micro manipulator have been analyzed, and the input and output couplings have been investigated. The prototype of the micro manipulator has been fabricated by wire electro discharge machining (WEDM). Then, open-loop experimental tests have been performed. The experimental results match well with the analytical calculation, and the amplification ratios are 11.12 and 4.64 for the left part and right part, respectively. Proportional-integral (PI) controller has been used to regulate the output displacement and grasping force, and a series of closed-loop experiments have been conducted to investigate the performance of the micro manipulator. The results show that the position resolution for both the right and left parts is 0.15 μm, and the force resolution is 4 mN.

22 August 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CLCunman Liang
Cunman Liang
FWFujun Wang
Fujun Wang
ZHZhichen Huo
Zhichen Huo
BSBeichao Shi
Beichao Shi
YTYanling Tian
Yanling Tian
DZDawei Zhang
Dawei Zhang
To realize high precision rotation angle adjustment in micro/nano manipulation, a novel monolithic 2- degree of freedom (DOF) pure rotation platform is designed, fabricated and tested in this paper. The rotation platform is driven by two piezoelectric (PZT) actuators. Rotation decoupling is realized based on three Hooke's joints and a large rotation range is obtained based on two bridge-type mechanisms. Compared with other rotation platforms, the developed 2-DOF pure rotation platform has the advantages of fewer actuators due to rotation decoupling design and larger working frequency range due to compact structure and monolithic fabrication. An analytical model is established to calculate transmission ratio and input stiffness. The dominant parameters are determined based on sensitivity analysis. Finite element analysis (FEA) is conducted to investigate the characteristics of the rotation platform. Experimental tests are carried out to investigate the performance of the rotation platform. Decoupling test results show the maximum rotation angles in X- and Y- axes are 2.04 mrad and 2.12 mrad, respectively, and the X- and Y- axes relative coupling errors are 2.03% and 2.09%, respectively. Closed loop control results show that the settling time is 40 ms and the resolutions in X- and Y- axes are both 5 μrad.

7 December 2021 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
ZHZhichen Huo
Zhichen Huo
YTYanling Tian
Yanling Tian
FWFujun Wang
Fujun Wang
WZWei Zhang
Wei Zhang
BSBeichao Shi
Beichao Shi
DZDawei Zhang
Dawei Zhang
Aiming at the realization of high precision angle adjusting, this article proposed a rotary platform based on stick-slip principle, which adopted a dual-driven working mode to realize large circular motion stroke and high loading capacity. Based on flexure hinges, a symmetrical flexible mechanism with two driving feet was designed to generate coupled driving displacement. By actuating the piezoelectrics alternatively, the proposed dual-driven working principle was described in detail, which could effectively suppress the back-off phenomenon and improve loading capacity. The theoretical analysis and finite element simulation were conducted to investigate the characteristic of flexible driving unit. The dynamic model of dual-driven working mode was established and simulated in MATLAB/Simulink, and the influence of preloading coefficient and initial preloading force were investigated, which provided a guidance for the design and optimization of stick-slip actuator. Additionally, a prototype was fabricated, and a series of experiments were conducted. The results indicated that the maximum rotary speed and loading capacity of rotary platform were 48.3 mrad/s and 98.8 mN·m, respectively.

28 January 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
FWFujun Wang
Fujun Wang
BSBeichao Shi
Beichao Shi
ZHZhichen Huo
Zhichen Huo
YTYanling Tian
Yanling Tian
DZDawei Zhang
Dawei Zhang
This article proposes the design, analysis, and experimental tests of a novel piezoelectrically actuated micromanipulator with spatial structure. Three-stage amplification is employed to amplify input displacement to obtain desired output displacement, and deployable mechanism is adopted to achieve compact structure. The spatial micromanipulator is designed with two fixed fingers and two detachable fingers, which can achieve multioperation modes. Theoretical analysis is utilized to evaluate the characteristics of the micromanipulator. Prototype of the micromanipulator is fabricated and experimental tests are carried out to investigate its performance. The results indicate the motion stroke is 125 μm with respect to 100 V voltage, the amplification ratio is 10.84, and the coupling rate is 4.32%. Close-loop test results show that the settling time is 23.5 ms with 2.8% overshoot, and the resolution can reach 0.1 μm. Finally, the developed micromanipulator is used to operate tiny objects with differentshapes.

5 August 2022 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
BSBeichao Shi
Beichao Shi
FWFujun Wang
Fujun Wang
ZHZhichen Huo
Zhichen Huo
YTYanling Tian
Yanling Tian
RCRen Cong
Ren Cong
DZDawei Zhang
Dawei Zhang
This paper proposes a novel contact force sensing and control method for the inserting operation during precise assembly process, which is based on a micromanipulator integrated with force sensors. At first, theoretical analysis is carried out to calculate the admissible contact force between the gripped holes and the pegs. The contact force thresholds which are smaller than the admissible contact forces are adopted in the control algorithm to avoid the rotating of the gripped holes during assembly process. The force sensors are calibrated using an ATI force sensor and the conversing coefficients are calculated. The admissible contact forces are tested when different contact distance and preload force are adopted. The performance of the proposed contact force sensing and control method is verified by carrying out the task of applying contact force on the surface of the gripped holes with different contacting speeds. The results indicate that the contact force can be adjusted to be smaller than the threshold 1 and the peg-in-hole assembly can be completed successfully. Note to Practitioners—This paper proposes a novel contact force sensing method during the inserting operation. Compared with the traditional contact force sensing method, this paper adopts the force sensor integrated into the micromanipulator instead of commercial force sensor to detect the contact force between two parts. To ensure the assembling precision, the theoretical analysis is conducted to calculated the admissible contact force to avoid the sliding and rotating of the gripped micro part during assembling. This work efficiently simplifies the contact force sensing and control process, where complex calibration process needn’t to be carried out to eliminate the influence of the mass of the micromanipulator on the testing results. In addition, the assembling costs are reduced by replacing commercial force sensors with strain gauges.

1 November 2021 in Sensors and Actuators A: Physical
Verified
Journal Article
Closed access
YTYanling Tian
Yanling Tian
ZHZhichen Huo
Zhichen Huo
FWFujun Wang
Fujun Wang
BSBeichao Shi
Beichao Shi