The development of new biological devices in response to market demands requires continuous efforts for the improvement of products’ functionalization based upon expansion of the materials used and their fabrication techniques. One viable solution consists of a functionalization substrate covered by layers via an appropriate deposition technique. Laser techniques ensure an enhanced coating’s adherence to the substrate and improved biological characteristics, not compromising the mechanical properties of the functionalized medical device. This is a review of the main laser techniques involved. We mainly refer to pulse laser deposition, matrix-assisted, and laser simple and double writing versus some other well-known deposition methods as magnetron sputtering, 3D bioprinting, inkjet printing, extrusion, solenoid, fuse-deposition modeling, plasma spray (PS), and dip coating. All these techniques can be extended to functionalize surface fabrication to change local morphology, chemistry, and crystal structure, which affect the biomaterial behavior following the chosen application. Surface functionalization laser techniques are strictly controlled within a confined area to deliver a large amount of energy concisely. The laser deposit performances are presented compared to reported data obtained by other techniques.

This chapter reviews the laser ablation of delicate organic/biological substances by matrix-assisted pulsed laser evaporation (MAPLE). It is shown that direct ablation in this case is possible but sometimes not workable at all in adverse conditions. The considered solution is the protection by a prevalent dissolving/suspending component that can allow for a “shielded” ablation by the frozen solvent followed by its gradual evaporation by melting, evaporation and evacuation by pumping system. We extend the study to the case of non-UV absorbing solvents, e.g., water, when the primary interaction between laser and solute ignites evaporation process at a lower ablation threshold due to reduced pressure inside irradiation chamber. We called this case as “generalized” MAPLE interaction. Relevant examples are provided and critically analyzed in view of potential applications for nanobiomedicine, biosensors, advanced implants and chemical technologies.