We present an improved analytical model of a spectrometer for optical coherence tomography (OCT), which more accurately describes the OCT in-depth sensitivity fall-off. The model considers the intrinsic spectral resolution of the dispersive element and the influence of additional components (inequidistance-correcting prism). The model is validated by experimental data obtained both from other studies and our own experiments. The influence of the frequency response of the CCD electrical circuit and the analog-to-digital converter to the OCT signal fall-off was also detected and was shown to be significant in some cases.
This study highlights the possibility of contrasting the differences in tissues’ mechanical properties from Optical Coherence Tomography (OCT) data without maintaining phase stability during OCT data acquisition. The proposed method is based on the rate of attenuation coefficient changes under the mechanical pressure evaluation of the OCT data. It was shown, both on the calibrated synthetic and ex vivo biological samples, that the rate of attenuation coefficient changes observed corresponds to the sample’s mechanical properties and could be used to characterize the sample and distinguish it from other samples even if their optical properties before the pressure application are similar. This opens up the possibility to use an in vivo OCT-based system that can contrast mechanical properties without ensuring phase stability.