Fan Ye

Fan Ye


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 August 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
DZDanfeng Zhai
Danfeng Zhai
WJWenning Jiang
Wenning Jiang
XJXinru Jia
Xinru Jia
JLJingchao Lan
Jingchao Lan
MGMingqiang Guo
Mingqiang Guo
CCChixiao Chen
Chixiao Chen
This paper presents a neural network-based digital calibration algorithm for high-speed and time-interleaved (TI) ADCs. In contrast with prior methods, the proposed work features joint amplitude-dependent and phase-dependent nonlinear distortion correction without prior-knowledge of ADC architecture feature. A dynamic calibration is first used to compensate for phase-dependent distortion. Two training optimizations, including a sub-range-sample-based batch schemes and a recursive foreground co-calibration flow are proposed to reduce the error and overfitting and further save hardware resources. A practical calibration engine is also investigated for interleaved ADCs with distributed weight and shared weight methods. To demonstrate the effectiveness of the method, the calibration engine is verified by two fabricated ADC prototypes, a 5 GS/s 16-way interleaved ADC and a 625 MS/s interleaving-SAR assisted pipeline ADC. Measurement results show that SFDR is improved between 16.9dB and 36.4dB before and after calibration for different frequency inputs. To trade-off between accuracy and power consumption, a quantized and pruned engine is implemented on both FPGA and 28nm CMOS technology. Experimental results show that the dedicated calibration on silicon consumes 8.64mW with 0.9V power supply at 333MHz clock rate. Measurement results show that the quantized hardware implementation has only 0.4-4 dB loss in SFDR.

30 August 2010 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
LLLiang Liu
Liang Liu
FYFan Ye
Fan Ye
XMXiaojing Ma
Xiaojing Ma
TZTong Zhang
Tong Zhang
JRJunyan Ren
Junyan Ren
This brief presents an efficient and configurable multiple-input-multiple-output (MIMO) signal detector design solution and its high-speed IC implementation. This detector can support 2 × 2/3 × 3/4 × 4 MIMO and quadratic phase-shift keying/16-state quadratic amplitude modulation (QAM)/64-state QAM modulation configurations. The detection algorithm employs an early-pruned technique that can reduce up to 46% node extensions in the K-Best sphere decoder while maintaining an almost maximum-likelihood performance. A parallel multistage folded very large scale integration architecture is accordingly developed that can achieve high detection throughput and configurability. To further improve the IC implementation efficiency, this detector also uses a candidate-sharing structure for partial Euclidean distance calculation and a two-stage sorter for survivor node selection. A test chip has been fabricated using 0.13- m single-poly- and eight-metal (1P8M) CMOS technology with a core area of 3.9 mm2. Operating at 1.2-V supply with 137.5-MHz clock, the chip achieves 1.1-Gb/s throughput and consumes 115 pJ per bit, representing 40% more energy efficient than state of the art in the open literature.

19 November 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
YCYuefeng Cao
Yuefeng Cao
SZShumin Zhang
Shumin Zhang
TZTianli Zhang
Tianli Zhang
YCYongzhen Chen
Yongzhen Chen
YZYutong Zhao
Yutong Zhao
JRJunyan Ren
Junyan Ren
This paper presents a single-coarse dual-fine architecture that improves energy-efficiency of pipelined-SAR analog-to-digital converters (ADCs). A coarse and fast sub-ADC is used to quantize the most significant bits (MSBs), which are encoded with a proposed residue transformation method to control the residue generation of the first stages in two fine channels. The residue voltages generate on the capacitive digital-to-analog converters (C-DACs) of split fine channels directly without successive approximation processes. Therefore, the conversion rate is increased and the power is reduced. A shuffle mechanism is introduced into split-ADC based digital background calibration to avoid the divergence of the conventional algorithm in the proposed architecture. A high-energy-efficiency dynamic amplifier is also introduced as the residue amplifier. A 14-bit 60-MS/s ADC is prototyped in a 28-nm CMOS process. The digital calibration engine operates under 0.9-V supply, other parts of the ADC core operate under 1.05-V supply. The ADC core consumes 4.26 mW. Measurement results show that the calibration improved the signal-to-noise and distortion ratio (SNDR) and spur-free dynamic range (SFDR) dramatically, the calibrated ADC achieves SNDR and SFDR of 66.9 dB and of 91.0 dB respectively, translating to a Schreier FoM of 165.4 dB and a Walden FoM of 39.3 fJ/conversion-step.

12 May 2021 in IEEE Access
Verified
Journal Article
Open access
MLManxin Li
Manxin Li
YYYuting Yao
Yuting Yao
BHBiao Hu
Biao Hu
JWJipeng Wei
Jipeng Wei
YCYong Chen
Yong Chen
JRJunyan Ren
Junyan Ren
This paper presents a 12-bit 100-MS/s asynchronous successive approximation register (SAR) analog-to-digital converter (ADC) for low-power wireless and imaging systems. A split-capacitor digital-to-analog converter (CDAC) structure is adopted for reducing the core area and improving the sampling speed. The linearity of the CDAC is calibrated by programming the least-significant-bits (LSBs) dummy capacitor. The unit capacitor in the CDAC array is customized for higher symmetry and reducing their mismatch. Our SAR ADC is based on asynchronous logic, and its timing is controlled by a delaying block in the critical path. The prototype is fabricated in a 65-nm CMOS process with a 1.2 V supply and occupies an active area of 0.029 mm 2 . With a 100-MS/s sampling rate, the measured ENOB scores 10.17 bits for 1.5 MHz input with a figure-of-merit (FoM) of 6.94 fJ/conversion-step. It can achieve 8.83 bits for Nyquist input signal.

4 October 2016 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
DXDezhi Xing
Dezhi Xing
YZYan Zhu
Yan Zhu
CCChi-Hang Chan
Chi-Hang Chan
SSSai-Weng Sin
Sai-Weng Sin
FYFan Ye
Fan Ye
RMRui Paulo Martins
Rui Paulo Martins
This brief presents a 7-bit 700-MS/s four-way time-interleaved successive approximation register (SAR) analog-to-digital converter (ADC). A partial Vcm-based switching method is proposed that requires less digital overhead from the SAR controller and achieves better conversion accuracy. Compared with switchback switching, the proposed method can further reduce the common mode variation by 50%. In addition, the impacts of such a reduction on the comparator offset, noise, and input parasitic are theoretically analyzed and verified by simulation. The prototype fabricated in a 65-nm CMOS technology occupies an active area of 0.025 mm². The measurement results at the 700 MS/s sampling rate show that the ADC achieves signal-to-noise-and-distortion ratio of 40 dB at Nyquist input and consumes 2.72 mW from a 1.2 V supply, which results in a Walden FoM of 48 fJ/conversion step.

1 May 2017
Verified
Conference Paper
Closed access
YCYongzhen Chen
Yongzhen Chen
JWJingjing Wang
Jingjing Wang
HHHang Hu
Hang Hu
FYFan Ye
Fan Ye
JRJunyan Ren
Junyan Ren
This paper presents an 11bit 200MS/s SAR-assisted pipeline ADC with a 2.5bit front end stage and two time-interleaved 9bit sub-SAR ADCs, implemented in 65nm CMOS process. The bias-enhanced ring amplifier works as the residue amplifier for power efficiency and large signal swing. Two self-biased inverter stages are designed in the ring amplifier to maintain the closed loop stability. The SAR ADCs with custom capacitor arrays are featured by l.5bit acceleration in the second quantization step. With the least-mean-square algorithm calibration, this ADC achieves an ENOB of 9.5bit and a FoM of 15.7fJ/conv-step at a 2.4MHz input signal sampled at 200MHz.