Flexible and effective methods for oil–water separation are crucial for reducing pollutant emissions and safeguarding water and fuel resources. In recent years, there has been growing interest in fundamental research and engineering applications related to water and fuel purification, especially oil–water separation. To date, filter materials with special wetting characteristics have been widely used in oil–water separation. Nanostructured materials are one of the most attractive candidates for next-generation oil–water separation. This review systematically summarizes the mechanisms and current status of oil–water separation using nanostructured materials. Basically, this can be achieved by using nanostructured materials with specific wettability and nanostructures. Here, we provide a detailed discussion of two general approaches and their filtration mechanisms: (1) the selective filtration technique, based on specific surface wettability, which allows only oil or water to penetrate while blocking impurities; (2) the absorption technique, employing porous sponges, fibers, or aerogels, which selectively absorbs impure oil or water droplets. Furthermore, the main failure modes are discussed in this review. The purposes of this article are: (1) to summarize the methods of oil–water separation by nanotechnology; (2) to raise the level of environmental protection consciousness of water pollution by using nanotechnology; (3) to tease out the features of different approaches and provide a pivotal theoretical basis to optimize the performance of filtering materials. Several approaches for oil and water separation are compared. Furthermore, the principle and application scope of each method are introduced.
The nanostructure-based surface texturing can be used to improve the materials wettability. Regarding oil–water separation, designing a surface with special wettability is as an important approach to improve the separation efficiency. Herein, a ZnO nanostructure was prepared by a two-step process for sol–gel process and crystal growth from the liquid phase to achieve both a superhydrophobicity in oil and a superoleophobic property in water. It is found that the filter material with nanostructures presented an excellent wettability. ZnO-coated stainless-steel metal fiber felt had a static underwater oil contact angle of 151.4° ± 0.8° and an underoil water contact angle of 152.7° ± 0.6°. Furthermore, to achieve water/oil separation, the emulsified impurities in both water-in-oil and oil-in-water emulsion were effectively intercepted. Our filter materials with a small pore (~5 μm diameter) could separate diverse water-in-oil and oil-in-water emulsions with a high efficiency (>98%). Finally, the efficacy of filtering quantity on separation performance was also investigated. Our preliminary results showed that the filtration flux decreased with the collection of emulsified impurities. However, the filtration flux could restore after cleaning and drying, suggesting the recyclable nature of our method. Our nanostructured filter material is a promising candidate for both water-in-oil and oil-in-water separation in industry.
Perfect optical vortices (POVs), consists of a single bright ring structure, has been widely studied owing to its radius independent of orbital angular momentum (OAM). However, most of the existing works about POVs are limited to single ring structure. Flexible shaping of intensity distribution of POVs is vital for multiple applications. In this paper, we propose a method generate phase tunable multi-ring perfect optical vortices (MR-POVs) where each ring size is independent of its OAM. The scheme is based on the radical discontinuous spiral phase plate (RD-SPP) which introduces controllable phase jumps along radial direction. It is experimentally demonstrated that the vortex nature of the MR-POVs through an interferometric method, showing that each ring of MR-POVs possesses same topological charge value (magnitude and sign), and the intensity ratio between each ring can be freely regulated by adjusting phase distribution, which could offer more flexible optical gradient force for guiding and transporting particles. In addition, simulation and experimental results show that the integer and fractional MR-POV can generated by the independent regulation of angular and radial factors. This work expands our understanding of multi-ring POV and may provide a new idea for optical tweezers and OAM communications.
Although multi-parameter fitting algorithms are often used for the characterization of coated-bubbles, it is inevitable to introduce uncertainty into the results. Therefore, it is urgent to develop some improved techniques to analyze the mechanical properties of the multifunctional microbubbles (MBs) accurately and systematically. By combining the measurements of atomic force microscopy, optical and acoustic detection with the simulations of coated-bubble dynamics, a comprehensive technology was developed to determine the size distribution, shell thickness, elasticity, and viscosity of multifunctional MBs precisely. Moreover, the impact of magnetic nanoparticles (MNPs) concentration on the multifunctional MBs' dynamic properties was studied systematically. It is demonstrated that, with the increasing MNPs concentration, the MB mean diameter and shell stiffness increased and ultrasound scattering response and inertial cavitation activity could be significantly enhanced. Although the shell thickness does not depend on the MNPs concentration, the increased MNPs concentration would generally result in enhanced bulk modulus and reduced bulk viscosity. The results of current studies demonstrate that the proposed single-parameter evaluation method could be helpful for further design and development of MB agents in clinic applications.
This study introduces a combined model to explain the microscopic mechanisms that control cavitation in mechanical seals. The model merges a macroscopic analysis of fluid lubrication using the Reynolds equation with a microscopic model of single-bubble dynamics governed by the Gilmore equation. This integration allows for an examination of bubble behavior within the flow field of the fan-shaped groove mechanical seal. An exploration of how cavitation intensity is affected by seal geometric parameters and operational conditions from a micro-bubble dynamics perspective was carried out. The findings indicate that pressure fluctuations cause intense volumetric oscillations in bubbles, leading to the emission of energy in the form of acoustic pressure waves. It is also shown that increasing rotational speed and decreasing groove depth significantly amplify local pressure gradients and flow velocities, thereby enhancing the likelihood of cavitation. The notable cavitation phenomena arise due to the combined effects of shallow groove depths and high rotational speeds. This study establishes a theoretical basis for optimizing mechanical seal design and managing cavitation effects.