Microwave technology plays a more important role in modern industrial sensing applications. Pushed by the significant progress in monolithic microwave integrated circuit technology over the past decades, complex sensing systems operating in the microwave and even millimeter-wave range are available for reasonable costs combined with exquisite performance. In the context of industrial sensing, this stimulates new approaches for metrology based on microwave technology. An old measurement principle nearly forgotten over the years has recently gained more and more attention in both academia and industry: the six-port interferometer. This paper reviews the basic concept, investigates promising applications in remote, as well as contact-based sensing and compares the system with state-of-the-art metrology. The significant advantages will be discussed just as the limitations of the six-port architecture. Particular attention will be paid to impairment effects and non-ideal behavior, as well as compensation and linearization concepts. It will be shown that in application fields, like remote distance sensing, precise alignment measurements, as well as interferometrically-evaluated mechanical strain analysis, the six-port architecture delivers extraordinary measurement results combined with high measurement data update rates for reasonable system costs. This makes the six-port architecture a promising candidate for industrial metrology.
20 April 2018 in IEEE Transactions on Microwave Theory and Techniques
Contactless sensing plays an important role in today's highly automated industrial environment, as modern sensors allow for an increased product quality in high-speed manufacturing lines. Hereby, a measurement system for sheet thickness monitoring in aluminum and steel rolling mills is presented. The presented concept is based on a differential measurement principle using two cooperating six-port radar systems. The radio-frequency front ends are designed in a high-density substrate-integrated waveguide technology at a frequency of 61 GHz. Furthermore, a detailed analysis of nonideal behavior of monostatic six-port radar front ends is presented. Moreover, the measurement principle is evaluated in a simplified measurement setup and the results are compared with the previously presented theory. Finally, an overview of modern sensing technology for steel rolling mills is presented and compared with the proposed measurement system considering the important aspects, i.e., update rate, precision, and thickness limit.
Six-port interferometers are of great interest for displacement and vibration measurements in industrial as well as medical applications. However, they show offsets as well as amplitude and phase imbalances in their differential in-phase and quadrature signals, leading to inaccuracies of the measured displacement. If a very slow moving or vibrating target has to be monitored, an additional phase shifter for calibration is needed, so that the system's errors can be compensated. A method for calculation and compensation of errors is presented and a compact and cost-efficient implementation of a phase shifter for 24 GHz Six-port interferometers is shown.
19 January 2017 in IEEE Transactions on Instrumentation and Measurement
Surface acoustic wave (SAW) resonators are used for a broad range of wireless sensing applications, some of them having high demands on the resolution as well as the measurement update rate. This paper presents a new interrogation method for precise and fast frequency determination of passive SAW resonators based on instantaneous frequency measurement by a low-cost six-port interferometer. Using a delay line, the frequency measurement is reduced to a phase measurement that can be instantaneously evaluated by the six-port network. No complex signal processing is necessary providing high update rates and low hardware costs. An in-depth analysis of the system concept and its building blocks is presented, and the advantages as well as the limitations are discussed and compared with the current state of the art. Finally, a demonstrator in the 2.4-GHz frequency band shows the feasibility and the precision of the concept with measurement times of only a few microseconds.
This paper presents a low power 24GHz Doppler radar system for presence detection and occupancy monitoring. It is based on a minimalistic hardware approach and is able to wirelessly sense human respiratory signals so that even non-moving persons can be detected. By intermittently measuring, the average power consumption could be significantly reduced down to e.g. 0.2mW for 20 measurements per second. Experiments verify that, due to the short wavelength, the single channel receiver limitations can be neglected when only a detection of human respiratory but no evaluation of the breathing frequency is necessary.
In this paper an improved calibration procedure for six-port based displacement measurement radar is proposed. The entire system characterization is done only using several measurements of the target at known positions and no additional calibration standards are required. The proposed calibration has been experimentally verified for a six-port based displacement measurement radar operating at 24 GHz. The performed measurements within the target position range 0 - 18.75 mm prove a significant improvement of the accuracy with respect to the other reported algorithms.