This paper deals with the energy management strategy (EMS) for an on-board semi-active hybrid energy storage system (HESS) composed of a Li-ion battery (LiB) and ultracapacitor (UC). Considering both the nonlinearity of the semi-active structure and driving condition uncertainty, while ensuring HESS operation within constraints, an adaptive model predictive control (AMPC) method is adopted to design the EMS. Within AMPC, LiB Ah-throughput is minimized online to extend its life. The proposed AMPC determines the optimal control action by solving a quadratic programming (QP) problem at each control interval, in which the QP solver receives control-oriented model matrices and current states for calculation. The control-oriented model is constructed by linearizing HESS online to approximate the original nonlinear model. Besides, a time-varying Kalman filter (TVKF) is introduced as the estimator to improve the state estimation accuracy. At the same time, sampling time, prediction horizon and scaling factors of AMPC are determined through simulation. Compared with standard MPC, TVKF reduces the estimation error by 1~3 orders of magnitude, and AMPC reduces LiB Ah-throughput by 4.3% under Urban Dynamometer Driving Schedule (UDDS) driving cycle condition, indicating superior model adaptivity. Furthermore, LiB Ah-throughput of AMPC under various classical driving cycles differs from that of dynamic programming by an average of 6.5% and reduces by an average of 10.6% compared to rule-based strategy of LiB Ah-throughput, showing excellent adaptation to driving condition uncertainty.

To improve the accuracy of insulation monitoring between the battery pack and chassis of electric vehicles, we established a serial battery pack model composed of first-order resistor-capacitor (RC) circuit battery cells. We then designed a low-voltage, low-frequency insulation monitoring model based on this serial battery pack model. An extended Kalman filter (EKF) was designed for this non-linear system to filter the measured results, thus mitigating the influence of noise. Experimental and simulation results show that the proposed monitoring model and extended Kalman filtering algorithm for insulation resistance monitoring present satisfactory estimation accuracy and robustness.

Battery state of charge (SOC), state of health (SOH), and state of power (SOP) are decisive factors that influence the energy-management system (EMS) performance of electric vehicles. However, the accurate estimation of SOC, SOH, and SOP remains a challenge due to the high nonlinearity of the battery dynamic characteristics and the strong coupling among the states. In this paper, different methods of single-state and two-state joint estimation are classified and discussed, including SOC/SOH and SOC/SOP joint estimation methods, and their advantages and limitations are analyzed. On this basis, key issues of joint multi-state estimation are discussed, and suggestions for future work are made.

Battery states are very important for the safe and reliable use of new energy vehicles. The estimation of power battery states has become a research hotspot in the development of electric buses and transportation safety management. This paper summarizes the basic workflow of battery states estimation tasks, compares, and analyzes the advantages and disadvantages of three types of data sources for battery states estimation, summarizes the characteristics and research progress of the three main models used for estimating power battery states such as machine learning models, deep learning models, and hybrid models, and prospects the development trend of estimation methods. It can be concluded that there are many data sources used for battery states estimation, and the onboard sensor data under natural driving conditions has the characteristics of objectivity and authenticity, making it the main data source for accurate power battery states estimation; Artificial neural network promotes the rapid development of deep learning methods, and deep learning models are increasingly applied in power battery states estimation, demonstrating advantages in accuracy and robustness; Hybrid models estimate the states of power batteries more accurately and reliably by comprehensively utilizing the characteristics of different types of models, which is an important development trend of battery states estimation methods. Higher accuracy, real-time performance, and robustness are the development goals of power battery states estimation methods.

Inconsistencies that are associated with parallel-connected cells used in electric vehicles induce varied states of charge (SOCs) in each cell. Thus, loop current in the battery pack is inevitable, and this reduces overall capacity, energy utilization rate, and pack lifetime. However, no method is available to address loop current. To reduce loop current and the resulting battery inconsistency, a parallel-connected cell pack (PCCP) model that considers thermal effects is established, and a novel Simscape model that is based on PCCP is successfully constructed. Furthermore, the strategy of parallel-connected cell energy management (PCCEM) is proposed to utilize fuzzy logic control (FLC) strategy, which automatically adjusts the number of cells in a circuit in accordance with the load demand, and turns on the first N switches in the corresponding SOC order. The New European Driving Cycle (NEDC) driving cycle simulation shows that the PCCEM strategy considerably reduces loop current and improves the consistency of battery performance and the utilization rate of battery power.

The vibration signal of the bearing is mostly used in the fault diagnosis research of rolling bearings, and the vibration signal has the characteristics of strong non-smoothness and is easy to be disturbed by noise. This characteristic of the vibration signal has a strong adverse effect on the fault diagnosis of bearings. To improve the accuracy of bearing fault diagnosis, a rolling bearing fault diagnosis method based on the combination of a short-time Fourier transform and a convolutional neural network is proposed. Firstly, a short-time Fourier transform is performed on the original vibration signal of the bearing to obtain the time-frequency image of the vibration signal. Then, the dual model of 2D convolutional neural network which can obtain abundant fault information is built. Secondly, the obtained time-frequency image is image compressed to fit the proposed model. Finally, the images are input into the network for fault diagnosis, and the fault classification accuracy reaches 100%. The proposed model is tested by two methods: adding Gaussian noise to the time-frequency image and testing the model using bearing data from other working conditions, and the results show that the proposed method has good noise immunity and generalization, which can provide an effective diagnostic scheme for bearing fault diagnosis.