Due to the differences between the glass and crystalline phases, crystallization of metallic glass occurs with heat release, volume shrinkage, and electrical resistivity drastic changes. Electrical resistivity of the Zr52.5Cu17.9Ni14.6Al10Ti5 metallic glass during crystallization was investigated under both continuous heating and isothermal annealing. This amorphous alloy exhibits a continuous variation instead of sharp decline when reaches the onset crystallization temperature. This unique variation was found to be related to the formation of a few quasicrystalline phases. The slower phase transformation process of this metallic glass brings lots of grain boundaries, which results in increasing of resistivity at the last stage during isothermal annealing. These results imply that electrical resistivity measurement is a more intuitive approach to investigate structure evolution of metallic glasses.
The preparation method of transmission electron microscopy (TEM) samples for pure zirconium was successfully executed using a focused ion beam (FIB) system. These samples unveiled artifact hydrides induced during the FIB sample preparation process, which resulted from stress damage, ion implantation, and ion irradiation. An innovative solution was proposed to effectively reduce the effect of artifact hydrides for FIB-prepared samples of hydrogen-sensitive materials, such as zirconium alloys. This development lays the groundwork for further research on the micro/nanostructures of zirconium alloys after ion irradiation, thereby facilitating the study of corrosion mechanisms and the prediction of service life for nuclear fuel cladding materials. Furthermore, the solution proposed in this study is also applicable to TEM sample preparation using FIB for other hydrogen-sensitive materials such as titanium, magnesium, and palladium.
Atomic probe tomography (APT) samples with Al/Ni multilayer structure were successfully prepared by using a focused ion beam (FIB), combining with a field emission scanning electron microscope, with a new single-wedge lift-out method and a reduced amorphous damage layer of Ga ions implantation. The optimum vertex angle and preparation parameters of APT sample were discussed. The double interdiffusion relationship of the multilayer films was successfully observed by the local electrode APT, which laid a foundation for further study of the interface composition and crystal structure of the two-phase composites.
Two-dimensional (2D) material-based resistive random-access memory (RRAM) has emerged as a promising solution for neuromorphic computing and computing-in-memory architectures. Compared to conventional metal-oxide-based RRAM, the novel 2D material-based RRAM devices demonstrate lower power consumption, higher integration density, and reduced performance variability, benefiting from their atomic-scale thickness and ultra-flat surfaces. Remarkably, 2D layered metal oxides retain these advantages while preserving the merits of traditional metal oxides, including their low cost and high environmental stability. Through a multi-step dry transfer process, we fabricated a Pd-MoO3-Ag RRAM device featuring 2D α-MoO3 as the resistive switching layer, with Pd and Ag serving as inert and active electrodes, respectively. Resistive switching tests revealed an excellent operational stability, low write voltage (~0.5 V), high switching ratio (>106), and multi-bit storage capability (≥3 bits). Nevertheless, the device exhibited a limited retention time (~2000 s). To overcome this limitation, we developed a Gr-MoO3-Ag heterostructure by substituting the Pd electrode with graphene (Gr). This modification achieved a fivefold improvement in the retention time (>104 s). These findings demonstrate that by controlling the type and thickness of 2D materials and resistive switching layers, RRAM devices with both high On/Off ratios and long-term data retention may be developed.
Since its introduction, focused ion beam (FIB) technology has expanded from micro/nanofabrication in the semiconductor industry into the field of multimodal characterization of metallic material microstructures. This article systematically reviews the latest research advances of FIB-SEM technology in the field of metallic materials science. The fundamental principles and system functions of FIB-SEM are introduced, with emphasis on its key applications in two-dimensional and three-dimensional morphological characterization, as well as specimen preparation for transmission electron microscopy (TEM) and atom probe tomography (APT). The combined strategies of FIB-SEM with electron backscatter diffraction (EBSD), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and other characterization techniques are also discussed. Current developments indicate that FIB-SEM technology is advancing toward multi-ion-source synergy and multimodal integration. In the future, combined with artificial intelligence and big data analysis, it is expected to enable high-throughput, correlative measurements of multidimensional properties at the micro-scale, providing important technical support for "materials genome" research in metallic materials.
Since its introduction, focused ion beam (FIB) technology has expanded from micro/nanofabrication in the semiconductor industry to the field of multimodal characterization of metallic material microstructures. This article systematically reviews the latest research advances in FIB-SEM technology in the field of metallic materials science. The fundamental principles and system functions of FIB-SEM are introduced, with an emphasis on its key applications in two-dimensional and three-dimensional morphological characterization, as well as specimen preparation for transmission electron microscopy (TEM) and atom probe tomography (APT). The combined strategies of FIB-SEM with electron backscatter diffraction (EBSD), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and other characterization techniques are also discussed. Current developments indicate that FIB-SEM technology is advancing toward multi-ion-source synergy and multimodal integration. In the future, combined with artificial intelligence and big data analysis, it is expected to enable high-throughput, correlative measurements of multidimensional properties at the micro scale, providing important technical support for “materials genome” research in metallic materials.