Due to pollutants from industrial and agricultural activities, the lakes in China are faced with ecological and environmental problems. The five most famous lakes of Jiangsu Province, Taihu Lake, Gehu Lake, Gaobaoshaobo Lake, Hongze Lake, and Luoma Lake, have long-term fixed monitoring points for water body-related indicators. Over a five-year period, the monitoring showed that Gehu Lake had the highest average total nitrogen (TN) and total phosphorus (TP) concentrations among all lakes which were close to the Grade V critical value of the China’s Environmental Quality Standards for Surface Water (CEQSW). The NH₃-N concentrations in all lakes were Grade IV according to the China’s Water Quality Standard for Drinking Water Sources (CWQSDWS) and Grade II according to the CEQSW. In addition, although TP concentrations in Taihu Lake did not exceed Grade V in the CEQSW, TP removal was the main factor controlling eutrophication. It was also found that the petroleum concentrations in all lakes were lower than the Grade I according to the CEQSW. Despite this relatively low petroleum pollution, the concentration of petroleum was negatively correlated with the phytoplankton densities in all lakes. This indicated that phytoplankton density was very sensitive to petroleum concentration. For heavy metals, the concentrations of Pb, Cu, As, and Cd in all lakes were significantly lower than Grade I (CEQSW) from 2013 to 2017. However, the accumulated heavy metals in sediments will remain an important pollution source affecting water quality and aquatic products in the future. The comprehensive pollution index analysis showed that the five lakes were often moderately polluted, indicating that the protection of lake resources in China should not be relaxed for a long time in the future.

Carbon emission is one of the main causes of global climate change, thus it is necessary to choose a low-carbon method in the contaminated soil remediation. This paper studies the adsorption ability of ZVI on Pb(II) contaminated soils under different working conditions. The removal efficiency of Pb(II) was 98% because of the suitable ZVI dosage, log reaction time and low initial solution concentration. The whole balancing process was much fast according to the pseudo-second-order kinetic and Freundlich isothermal model. Moreover, sequential extraction procedure (SEP) showed Pb(II) was transformed from Fe/Mn oxides-bound form to residual form in Pb(II) contaminated soils. From scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and X-ray diffraction (XRD) results, it was confirmed that zero-valent iron (ZVI) stabilizes Pb(II) pollutants mostly through the combination of chemical adsorption and physical adsorption. The economic and carbon emission assessments were used to compare the cost and carbon emissions of different methods. The results show that ZVI adsorption has excellent economic benefits and low carbon emission.

Nuclear energy is a double-edged technology, which has a significant role in the chemical industry, but may bring about radioactivity and destruction. The 2011 Fukushima nuclear power plant accident caused by a tsunami, which flooded and led to tens of millions of disaster debris and tsunami deposits, severely disrupted the electricity supply in Japan and induced USD 211 billion worth of direct economic losses. Cs⁺ was easily dissolved in this accident, had a high chemical activity, and thus required an appropriate adsorption method. Zeolite is an effective removal adsorbent, which is suitable to be investigated. The present study uses natural zeolite and three inorganic modified zeolites. Furthermore, the effects of various factors are investigated. Kinetic models and the isothermal adsorption mechanism are also conducted. For microscale studies for the adsorption mechanism, scanning electron microscope (SEM) and X-ray diffraction (XRD) were involved in the study. The results indicate that the optimal dosage is 1.1 g and the maximum adsorption rate is around 80%. An alkaline environment is more conducive to the occurrence of adsorption. As for the isotherm and kinetic studies, the data fits better with the Redlich–Peterson isothermal model and intragranular diffusion model. In this small-scale experiment, the highest adsorption capacity was for Mg-zeolite at 6.53 mg/g. Finally, Mg-Zeolite presents the best adsorption capacity.

Greenhouse gas emission has been a serious problem for decades. Due to the high energy consumption of traditional construction and building materials, recycled aggregate and other environmentally-friendly materials or recycled materials have been researched and applied. The treatment and reuse of construction and demolition waste (CDW) is a good way to reasonably distribute the renewable resources in the urban city. The recycled aggregate can be used in road engineering, geotechnical engineering and structural engineering. The combined use of natural aggregate and recycled aggregate may possess better performance in real constructions. This paper investigates the mechanical performance, micro-mechanism and CO₂ footprint assessment of NAM (natural aggregate mortar) and RAM (recycled aggregate mortar). Compressive strength test, flexural strength test, XRD and SEM, and CO₂ emission evaluation were conducted and analyzed. The results indicate that NAM depicts better compressive strength performance and RAM has higher flexural strength. The XRD and SEM patterns illustrate that the ettringite and C-S-H are the most important role in shrinkage-compensating mechanism, which is more obvious in RAM specimens. The proportion of CaO and MgO hydrated into Ca(OH)₂ and Mg(OH)₂ is also a key point of the volume expansion through the curing period. Finally, the CO₂ emission of NA is higher than RA per unit. This indicates that utilizing recycled aggregate over other conventional resources will reduce the energy consumption, and hit the mark to be environmental-friendly.