Crystalline titanium dioxide (TiO2) semiconductor nanorods (NRs) feature several optical properties, such as birefringence combined with high refractive indexes and a wide bandgap precluding optical absorption in visible‐light spectrum, making them attractive for many applications such as optoelectronics. Dispersing these NRs in suitable solvents creates inorganic liquid crystals (LCs) offering enhanced collective and orientation‐dependent properties, which can additionally be utilized to manipulate optical behavior. Herein, a synthetic procedure from literature is scaled up and coupled with an important post‐synthesis‐treatment step such that self‐assembled NRs dried onto a liquid interface and in bulk can be investigated. Comprehensive characterizations confirm the vital role of surface ligand density of the NRs in reducing the effects of attractions between them and thus increasing the range of volume fractions in which these dispersions can be exploited. Various symmetries (hexagonal or tetragonal) can be achieved in the smectic layers of NRs by tuning the aspect ratios of the NRs from 4.8 to 8.5. Experiments show that external fields such as shear flow or electric fields can easily either induce a reversible nematic order in isotropic dispersions or order existing LC phases over much longer regions, opening many opportunities to manipulate light for optical applications.
Highly crystalline, organic-solvent-dispersible titanium dioxide (TiO2) nanorods (NRs) present promising chemicophysical properties in many diverse applications. In this paper, based on a modified procedure from literature, TiO2 NRs were synthesized via a ligand-assisted nonhydrolytic sol-gel route using oleic acid as the solvent, reagent, and ligand and titanium (IV) isopropoxide as the titanium precursor. This procedure produced monodisperse TiO2 NRs, as well as some semi-spherical titania nanocrystals (NCs) that could be removed by size-selective precipitation. X-ray diffraction and selected area electron diffraction results showed that the nanorods were anatase, while the semipheres also contained the TiO2(B) phase. By taking samples during the particle growth, it was found that the average length of the initially grown NRs decreased during the synthesis. Possible reasons for this unusual growth path, partially based on high-resolution transmission electron microscopy (HRTEM) observations during the growth, were discussed. The dispersion of anatase TiO2 nanorods was capable of spontaneous formation of lyotropic liquid crystals on the TEM grid and in bulk. Considering high colloidal stability together with the large optical birefringence displayed by these high refractive index liquid crystalline domains, we believe these TiO2 NRs dispersions are promising candidates for application in transparent and switchable optics.
23 October 2014 in Journal of Thermal Spray Technology
In this research, a novel nickel-coated nanostructured WC-12Co powder (Ni/nc-WC) was developed and used as feedstock material for high velocity oxygen fuel process. The Ni/nc-WC powders with average WC grain size of ~15 nm were produced by mechanical milling and electroless plating processes. The microstructural and tribological characteristics of Ni/nc-WC coating were investigated and compared with those of microcrystalline WC-12Co (mc-WC) and nanostructured WC-12Co (nc-WC) coatings. X-ray diffractometry, high-resolution field emission scanning electron microscopy, and transmission electron microscopy were used to evaluate the microstructure of the powders and coatings. A ball-on-disk technique was used to probe the wear behavior of the coatings. The Ni/nc-WC coating showed negligible decarburization of ~5.4%, while mc-WC and nc-WC coatings suffered from higher decarburization levels of 16.3 and 36.8%. The wear rate of Ni/nc-WC coating was 2.5 × 10−4 mg/m indicating ~ 75 and 82% increase in wear resistance compared with mc-WC and nc-WC coatings. The wear track analysis of mc-WC and nc-WC coatings showed evidences of delamination mechanism. Besides, a severe carbide pullout mechanism was operative in wear of nc-WC coating. As for Ni/nc-WC coating, individual carbide pullout following the elimination of Ni(Co) matrix was the predominant wear mechanism.
Transient electric birefringence measurements are used to show that brookite titania nanorods dispersed in the apolar liquid butylbenzene possess a large permanent dipole moment of 516 debye (rod length: 39 nm, diameter: 4.1 nm). This dipole moment makes the particles highly susceptible to applied electric fields. Isotropic dispersions at high volume fractions of up to 20% nanorods are aligned on a time scale of tens of microseconds at low field strengths. Alignment becomes nearly complete at a field strength of around 10 V/µm. It is shown that the birefringence of these dispersions is large enough that light transmission can be switched on and off in thin film cells of 150 µm thickness. These properties make brookite nanorod dispersions promising as the active material in optoelectronic applications.