Bottom-up approaches for producing bulk nanomaterials have traditionally lacked control over the crystallographic alignment of nanograins. This limitation has prevented nanocrystal-based nanomaterials from achieving optimized performances in numerous applications. Here we demonstrate the production of nanostructured BixSb2-xTe3 alloys with controlled stoichiometry and crystallographic texture through proper selection of the starting building blocks and the adjustment of the nanocrystal-to-nanomaterial consolidation process. In particular, we use disk-shaped BixSb2-xTe3 nanocrystals and tellurium nanowires as building blocks and hot press the materials using multiple pressure and release steps at a temperature above the tellurium melting point. We explain the formation of the textured nanomaterials though a solution-reprecipitation mechanism under a uniaxial pressure. Additionally, we further demonstrate these alloys to reach unprecedented thermoelectric figures of merit, up to ZT=1.96 at 420 K, with an average value of ZTave=1.77 for the record material in the range 320-500 K, thus potentially allowing up to 60 % higher energy conversion efficiencies than commercial materials.
Liquid crystal (LC) phases are in between solids and liquids with properties of both. Nematic LCs composed of rod-like molecules or particles exhibit long-range orientational order, yielding characteristic birefringence, but they lack positional order, allowing them to flow like a liquid. This combination of properties as well as their sensitivity to external fields make nematic LCs fundamental for optical applications e.g. liquid crystal displays (LCDs). When rod-like particles become bent, spontaneous bend deformations arise in the LC, leading to geometric frustration which can be resolved by complementary twist or splay deformations forming intriguing twist-bend (NTB) and splay-bend (NSB) nematic phases. Here, we show experimentally that the elusive NSB phases can be stabilized in systems of polydisperse micron-sized bent silica rods. Our results open avenues for the realization of NTB and NSB phases of colloidal and molecular LCs.
6 May 2020 in Particle & Particle Systems Characterization
In theory, liquid‐cell (scanning) transmission electron microscopy (LC(S)TEM) is the ideal method to measure 3D diffusion of nanoparticles (NPs) on a single particle level, beyond the capabilities of optical methods. However, particle diffusion experiments have been especially hard to explain in LC(S)TEM as the observed motion thus far has been slower than theoretical predictions by 3–8 orders of magnitude due to electron beam effects. Here, direct experimental evidence of undamped diffusion for two systems is shown; charge‐neutral 77 nm gold nanoparticles in glycerol and negatively charged 350 nm titania particles in glycerol carbonate. The high viscosities of the used media and a low electron dose rate allow observation of Brownian motion that is not significantly altered by the electron beam. The resulting diffusion coefficient agrees excellently with a theoretical value assuming free diffusion. It is confirmed that the particles are also moving in the direction parallel to the electron beam by simulating STEM images using Monte Carlo simulations. Simulations and experiments show blurring of the particles when these move out of focus. These results make clear that direct observation of 3D diffusion of NPs is possible, which is of critical importance for the study of interparticle interactions or in situ colloidal self‐assembly using LC(S)TEM.
22 September 2020 in Advanced Functional Materials
Crystalline titanium dioxide (TiO2) semiconductor nanorods (NRs) feature several optical properties, such as birefringence combined with high refractive indexes and a wide bandgap precluding optical absorption in visible‐light spectrum, making them attractive for many applications such as optoelectronics. Dispersing these NRs in suitable solvents creates inorganic liquid crystals (LCs) offering enhanced collective and orientation‐dependent properties, which can additionally be utilized to manipulate optical behavior. Herein, a synthetic procedure from literature is scaled up and coupled with an important post‐synthesis‐treatment step such that self‐assembled NRs dried onto a liquid interface and in bulk can be investigated. Comprehensive characterizations confirm the vital role of surface ligand density of the NRs in reducing the effects of attractions between them and thus increasing the range of volume fractions in which these dispersions can be exploited. Various symmetries (hexagonal or tetragonal) can be achieved in the smectic layers of NRs by tuning the aspect ratios of the NRs from 4.8 to 8.5. Experiments show that external fields such as shear flow or electric fields can easily either induce a reversible nematic order in isotropic dispersions or order existing LC phases over much longer regions, opening many opportunities to manipulate light for optical applications.
23 December 2022 in Journal of Colloid and Interface Science
Poly(N-isopropylacrylamide) (PNIPAM) microgels and PNIPAM colloidal shells attract continuous strong interest due to their thermoresponsive behavior, as their size and properties can be tuned by temperature. The direct single particle observation and characterization of pure, unlabeled PNIPAM microgels in their native aqueous environment relies on imaging techniques that operate either at interfaces or in cryogenic conditions, thus limiting the observation of their dynamic nature. Liquid Cell (Scanning) Transmission Electron Microscopy (LC-(S) TEM) imaging allows the characterization of materials and dynamic processes such as nanoparticle growth, etching, and diffusion, at nanometric resolution in liquids. Here we show that via a facile post-synthetic in situ polymer labelling step with high-contrast marker core-shell Au@SiO2 nanoparticles (NPs) it is possible to determine the full volume of PNIPAM microgels in water. The labelling allowed for the successful characterization of the thermoresponsive behavior of PNIPAM microgels and core shell silica@PNIPAM hybrid microgels, as well as the co-nonsolvency of PNIPAM in aqueous alcoholic solutions. The interplay between electron beam irradiation and PNIPAM systems in water resulted in irreversible shrinkage due to beam induced water radiolysis products, which in turn also affected the thermoresponsive behavior of PNIPAM. The addition of 2-propanol as radical scavenger improved PNIPAM stability in water under electron beam irradiation.
The recent development of liquid cell (scanning) transmission electron microscopy (LC-(S)TEM) has opened the unique possibility of studying the chemical behavior of nanomaterials down to the nanoscale in a liquid environment. Here, we show that the chemically induced etching of three different types of silica-based silica nanoparticles can be reliably studied at the single particle level using LC-(S)TEM with a negligible effect of the electron beam, and we demonstrate this method by successfully monitoring the formation of silica-based heterogeneous yolk–shell nanostructures. By scrutinizing the influence of electron beam irradiation, we show that the cumulative electron dose on the imaging area plays a crucial role in the observed damage and needs to be considered during experimental design. Monte-Carlo simulations of the electron trajectories during LC-(S)TEM experiments allowed us to relate the cumulative electron dose to the deposited energy on the particles, which was found to significantly alter the silica network under imaging conditions of nanoparticles. We used these optimized LC-(S)TEM imaging conditions to systematically characterize the wet etching of silica and metal(oxide)–silica core–shell nanoparticles with cores of gold and iron oxide, which are representative of many other core–silica–shell systems. The LC-(S)TEM method reliably reproduced the etching patterns of Stöber, water-in-oil reverse microemulsion (WORM), and amino acid-catalyzed silica particles that were reported before in the literature. Furthermore, we directly visualized the formation of yolk–shell structures from the wet etching of [email protected]öber silica and Fe3O4@WORM silica core–shell nanospheres.
About Me
Physics degree from Universitat Autonoma de Barcelona. PhD in Physics and Chemistry of Nanomaterials from Utrecht University
Physics degree from Universitat Autonoma de Barcelona. PhD in Physics and Chemistry of Nanomaterials from Utrecht University