Mohammed Alzuhairi

Prof. Dr. Mohammed Alzuhairi

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2021 in International Journal of Environmental Analytical Chemistry
Verified
Journal Article
Closed access
ZHZahraa A. Hussein
Zahraa A. Hussein
ZSZaidoon M. Shakor
Zaidoon M. Shakor
Mohammed AlzuhairiMohammed Alzuhairi
Mohammed Alzuhairi
FAFarooq Al-Sheikh
Farooq Al-Sheikh
Nowadays, plastic waste (PW) disposal is one of the serious global problems facing humanity and ecosystem balance. As the population increases continuously, the fuel market has been growing so the demand for plastic is also increased to cover the growing levels of consumption that leads to a serious environmental crisis by the PW accumulation. Therefore, recycling processes take place to clean the environment from these accumulated quantities of waste. Many studies accounted that the most suitable chemical recycling technique is pyrolysis which means conversion of the PW into valuable products in presence of heat. This review explained chemical structures, uses, recycling by thermal and catalytic pyrolysis of the plastic materials and discussed a comparison between two processes above. Moreover, investigation effects of the operating conditions such as temperature, pressure, residence time, and catalyst presence on the product distribution. Also, the reaction mechanism details of the process and work of previous researchers were addressed in this paper.

8 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Osamah basil MahmoodOsamah basil Mahmood
Osamah basil Mahmood
Mohammed AlzuhairiMohammed Alzuhairi
Mohammed Alzuhairi
Esther BailónEsther Bailón
Esther Bailón
Francisco Carrasco-MarinFrancisco Carrasco-Marin
Francisco Carrasco-Marin
Juan Amaro-GaheteJuan Amaro-Gahete
Juan Amaro-Gahete
The depletion of conventional light petroleum reserves has intensified the search for alternative sources, notably, low-quality heavy oils and byproducts from heavy crude processing, to meet the global demand for fuels, energy, and petrochemicals. Heavy crude oil (HO) and extra heavy crude oil (EHO) represent nearly 70% of the world’s reserves but require extensive upgrading to satisfy refining and petrochemical specifications. Their high asphaltene content results in elevated viscosity and reduced API gravity, posing significant challenges in extraction, transportation, and refining. Advanced catalytic approaches are crucial for efficient asphaltene removal and the conversion of heavy feedstocks into valuable light fractions. Kaolin, an aluminosilicate mineral, has emerged as a key precursor for zeolite synthesis and a promising catalyst in upgrading processes. This article provides a comprehensive exploration of kaolin’s geological origins, chemical properties, and structural characteristics, as well as the various modification techniques designed to improve its catalytic performance. Special focus is given to its application in the transformation of heavy crudes, particularly in facilitating asphaltene breakdown and enhancing light distillate yields. Finally, future research avenues and potential developments in kaolin-based catalysis are discussed, emphasizing its vital role in addressing the technological challenges linked to the growing reliance on heavier crude resources.

29 September 2025 in Processes
Verified
Journal Article
Open access
PDF file
Osamah basil MahmoodOsamah basil Mahmood
Osamah basil Mahmood
Mohammed AlzuhairiMohammed Alzuhairi
Mohammed Alzuhairi
ZSZaidoon Shakor
Zaidoon Shakor
Esther BailónEsther Bailón
Esther Bailón
Francisco Carrasco-MarinFrancisco Carrasco-Marin
Francisco Carrasco-Marin
Juan Amaro-GaheteJuan Amaro-Gahete
Juan Amaro-Gahete
Catalytic upgrading of vacuum residue (VR) is critical for enhancing fuel yield and reducing waste in petroleum refining. This study explores VR cracking over a novel cerium-loaded acidified metakaolinite catalyst (MKA800–20%Ce) prepared via calcination at 800 °C, acid leaching, and wet impregnation with 20 wt.% Ce. The catalyst was characterized using FTIR, BET, XRD, TGA, and GC–MS to assess structural, textural, and thermal properties. Catalytic cracking was carried out in a fixed-bed batch reactor at 350 °C, 400 °C, and 450 °C. The MKA800@Ce20% catalyst showed excellent thermal stability and surface activity, especially at higher temperatures. At 450 °C, the catalyst yielded approximately 11.72 g of total liquid product per 20 g of VR (representing a ~61% yield), with ~3.81 g of coke (~19.1%) and the rest as gaseous products (~19.2%). GC-MS analysis revealed enhanced production of light naphtha (LN), heavy naphtha (HN), and kerosene in the 400–450 °C range, with a clear temperature-dependent shift in product distribution. Structural analysis confirmed that cerium incorporation enhanced surface acidity, redox activity, and thermal stability, promoting deeper cracking and better product selectivity. Kinetics were investigated using an eight-lump first-order model comprising 28 reactions, with kinetic parameters optimized through a genetic algorithm implemented in MATLAB. The model demonstrated strong predictive accuracy taking into account the mean relative error (MRE = 9.64%) and the mean absolute error (MAE = 0.015) [MAE: It is the absolute difference between experimental and predicted values; MAE is dimensionless (reported simply as a number, not %). MRE is relative to the experimental value; it is usually expressed as a percentage (%)] across multiple operating conditions. The above findings highlight the potential of Ce-modified kaolinite-based catalysts for efficient atmospheric pressure VR upgrading and provide validated kinetic parameters for process optimization.

1 January 2024 in Russian Journal of Applied Chemistry
Verified
Journal Article
Closed access
PDF file
TJTuqa A. Jabar
Tuqa A. Jabar
Mohammed AlzuhairiMohammed Alzuhairi
Mohammed Alzuhairi
DADr. Mayyadah S. S. Abed
Dr. Mayyadah S. S. Abed
Recent advances have drawn the attention of many researchers in the creation of innovative catalysts that are not only effective but also cost-effective and ecologically benign. The large similarity between the geopolymers and zeolitic materials makes geopolymers suitable for catalytic applications. This research works on preparing geopolymer catalysts utilizing two different types of Iraqi kaolin (white and red kaolin) with six different mixes. Additionally, the hydrochloric acid (2M) treatment was conducted on the geopolymer base kaolin to increase surface area, and catalytic activity (improving the adsorption capacity) makes geopolymer more suitable for catalyst applications. The characterization of the geopolymer involved techniques such as XRD, XRF, FTIR, and BET. FTIR results showed changes in OH group structures (increase Brønsted & Lewis acid sites) essential for catalyst applications. XRD results indicated the presence of zeolite and Annite-phase along with amorphous phases. BET analysis of large increased surface area and pore size in acid-treated geopolymers. This research suggests the potential for improving inexpensive geopolymer catalysts, opening the door to cost-effective, sustainable, and high-performance catalysts for use in industries requiring porous materials and heavy oil processing, and paving the way for a greener and more environmentally conscious future.

28 March 2022 in Fluids
Verified
Journal Article
Open access
PDF file
Mohammed AlzuhairiMohammed Alzuhairi
Mohammed Alzuhairi
HAHanaa Al-Kaisy
Hanaa Al-Kaisy
MKMena Khdheer
Mena Khdheer
In this study, we aimed to figure out how the depolymerization of polyethylene terephthalate produces monomers, dimers, trimers, and other oligomers of bis (2-hydroxyethyl) terephthalate. Polymerization was achieved in a bubble column reactor with 0.05 wt% 40–50 nm magnesium oxide nanoparticle as a catalyst. A bubble column reactor was used to perform the recycling process at the boiling point of ethylene glycol and atmospheric pressure. Depolymerized polyethylene terephthalate (DPET) was mixed with poly(methyl methacrylate) and reinforced with 1% Nano Al2O3. The nanoparticles acted as a composite coating in low carbon steel protection. Adhesion strength and mechanical and structural properties were investigated for the composite, and the average coating thickness was 28.39 µm. The results showed that the hardness and adhesion forces between the substrate and composite coating increased with an increase in the amounts of DPET and nano-Al2O3 per polymer resin. On the other hand, the thermal conductivity of the composite coating decreased with the addition of DPET because of an increase in the end chain movement in the composite coating induced by the retardant and an increase in cross-linking force. Furthermore, the bubble column demonstrated outstanding heat and mass transfer phenomena that reduced the reaction time to just 40 min for complete depolymerzation and also reduced energy consumption.

21 December 2021 in International Journal of Design & Nature and Ecodynamics
Verified
Journal Article
Closed access
SAShams N. Almutalabi
Shams N. Almutalabi
Mohammed AlzuhairiMohammed Alzuhairi
Mohammed Alzuhairi
FHFadhil A. Hashim
Fadhil A. Hashim
PET (polyethylene terephthalate) is made up of polymerized repeating units of the ethylene terephthalate monomer (C10H8O4). PET is a recyclable plastic with the number 1 as its identification code. PET, which has a molecular weight of 192 gm/mole and contains 62.5 percent carbon, 33.3 percent oxygen, and 4.2 percent hydrogen, is utilized as synthetic fiber, polyester, plastic packaging, and soft drink containers all over the world. The main purpose of this study is to convert PET waste into liquid hydrocarbon fuel. Because PET use has risen significantly over the world, and the bulk of garbage is thrown into the soil rather than recycled, posing an environmental risk. During the heat breakdown phase, PET decomposes. It creates very strong and solid non-biodegradable terephthalic acid and benzoic acid complexes. To obtain liquid hydrocarbon fuel from PET, at 250-300℃, calcium hydroxide Ca(OH)2 is used as a catalyst in this study.