Graphene-based materials are highly interesting in virtue of their excellent chemical, physical and mechanical properties that make them extremely useful as privileged materials in different industrial applications. Sonochemical methods allow the production of low-defect graphene materials, which are preferred for certain uses. Graphene nanosheets (GNS) have been prepared by exfoliation of a commercial micrographite (MG) using an ultrasound probe. Both materials were characterized by common techniques such as X-ray diffraction (XRD), Transmission Electronic Microscopy (TEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All of them revealed the formation of exfoliated graphene nanosheets with similar surface characteristics to the pristine graphite but with a decreased crystallite size and number of layers. An exhaustive study of the particle size distribution was carried out by different analytical techniques such as dynamic light scattering (DLS), nanoparticle tracking analysis (NTA) and asymmetric flow field flow fractionation (AF4). The results provided by these techniques have been compared. NTA and AF4 gave higher resolution than DLS. AF4 has shown to be a precise analytical technique for the separation of GNS of different sizes.
Highly crystalline MIL-88A particles have been successfully synthesized via fast ultrasound-assisted processes. The influence of the sonication generator and synthesis time on the structure, crystallinity, morphology and surface area of the materials were studied in detail. Under this modified ultrasonic method, X-ray diffraction patterns of MIL-88A particles showed highly crystalline structures in contrast to those reported in literature. Significant differences on surface areas and microporosity were appreciated under ultrasound conditions employed. Specific surface areas in the range between 179 and 359 m2 g-1 were obtained. That material synthesized under ultrasound batch conditions during 1 h had the highest surface area and microporous character. Different particle sizes and morphologies were obtained depending on the synthesis procedure. In general, probe sonicators led to smaller particle sizes. Moreover, a comparative study of the ethylene adsorption of the MIL-88A particles and several common MOFs in the ethylene adsorption was investigated. The results suggest that the modified ultrasound-assisted procedure for the synthesis of MIL-88A is effective to obtain highly crystalline particles, which are very efficient to adsorb ethylene molecules.
Lithium-sulfur (Li-S) batteries have received enormous interest as a promising energy storage system to compete against limited, non-renewable, energy sources due to their high energy density, sustainability, and low cost. Among the main challenges of this technology, researchers are concentrating on reducing the well-known “shuttle effect” that generates the loss and corrosion of the active material during cycling. To tackle this issue, metal-organic frameworks (MOF) are considered excellent sulfur host materials to be part of the cathode in Li-S batteries, showing efficient confinement of undesirable polysulfides. In this study, MIL-88A, based on iron fumarate, was synthesised by a simple and fast ultrasonic-assisted probe method. Techniques such as X-ray diffraction (XRD), Raman spectroscopy, Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), and N2 adsorption/desorption isotherms were used to characterise structural, morphological, and textural properties. The synthesis process led to MIL-88A particles with a central prismatic portion and pyramidal terminal portions, which exhibited a dual micro-mesoporous MOF system. The composite MIL-88A@S was prepared, by a typical melt-diffusion method at 155 °C, as a cathodic material for Li-S cells. MIL-88A@S electrodes were tested under several rates, exhibiting stable specific capacity values above 400 mAh g−1 at 0.1 C (1C = 1675 mA g−1). This polyhedral and porous MIL-88A was found to be an effective cathode material for long cycling in Li-S cells, retaining a reversible capacity above 300 mAh g−1 at 0.5 C for more than 1000 cycles, and exhibiting excellent coulombic efficiency.
A suitable methodology of synthesis of coumarin derivatives by Pechmann reaction over heterogeneous solid acid catalysts in a free solvent media under microwave irradiation is described. Resorcinol, phenol and ethyl acetoacetate were selected as model reactants in the Pechmann condensation. The catalytic activity of several materials—Amberlyst-15, zeolite β and sulfonic acid functionalized hybrid silica—in solvent-free microwave-assisted synthesis of the corresponding coumarin derivatives has been investigated in detail. 7-Hydroxy-4-methylcoumarin and 4-methylcoumarin were obtained in 97% and 43% yields, respectively, over Amberlyst-15. This was the most active catalyst in the Pechmann reaction under studied conditions.