The advanced MEdium Resolution Spectral Imager (MERSI II) is a major instrument onboard the Chinese FengYun 3D satellite, which was launched in November 2017. Extensive measurements were performed during MERSI II prelaunch testing to ensure effective characterization for on-orbit calibration. This paper gives a brief overview of the prelaunch performance testing conducted for MERSI II, as well as its improvements in terms of instrument design compared to MERSI I. The prelaunch calibration methodology and radiometric performance are detailed, including dynamic range, signal-to-noise ratio, noise equivalent differential temperature, linearity, and response uniformity. The assessment results indicate that most bands perform effectively with mirror specification noncompliances in a few reflective solar bands (RSBs). In addition, investigation of the stability and uniformity of the spherical integrating source indicates that they have a critical impact on the performance assessment and prelaunch calibration of RSBs. The temperature-dependence features of thermal emissive bands' performances are also discussed in terms of their sensitivity to the operating temperature of the focal plane assembly and instrument circumstance. This paper also shows that the self-stability of the calibration source and the representation of the assessment methods are important as they affect the results of instrument performance evaluation.

Based on simulated reflectance, deep convective clouds (DCC) can be used as an invariant target to monitor the radiometric response degradation of the FY-3A/MERSI (Medium Resolution Spectral Imager) reflective solar bands (RSBs). The long-term response of the MERSI RSBs can easily be predicted using a quadratic fit of the monthly DCC mean reflectance, except for bands 6 and 7, which suffer from instrument anomalies. DCC-based degradations show that the blue bands (λ < 500 nm) and water-vapor bands have degraded significantly, whereas for near-infrared bands, the total degradations in four years are within 3% (excluding bands 3 and 20). For most bands, the degradation rates are greatest during the first year in orbit and decrease over time. The FY-3A/MERSI degradation results derived from DCC are consistent within 2.5%, except for bands, 11, 18 and 19, when compared with Aqua/MODIS(Moderate Resolution Imaging Sepetroradiometer) inter-calibration, multi-site invariant earth target calibration and the CRCS(Chinese Radiometric Calibration Site) Dunhuang desert vicarious calibration methods. Overall, the 2σ/mean degradation uncertainty for most MERSI bands was within 3%, validating the temporal stability of the DCC monthly mean reflectances. The DCC method has reduced the degradation uncertainties for MERSI water vapor bands over other methods. This is a significant advantage of the DCC calibration method. The saturation of some MERSI bands may hinder the effectiveness of the DCC calibration approach.

Climate observations and their applications require measurements with high stability and low uncertainty in order to detect and assess climate variability and trends. The difficulty with space-based observations is that it is generally not possible to trace them to standard calibration references when in orbit. In order to overcome this problem, it has been proposed to deploy space-based radiometric reference systems which intercalibrate measurements from multiple satellite platforms. Such reference systems have been strongly recommended by international expert teams. This paper describes the Chinese Space-based Radiometric Benchmark (CSRB) project which has been under development since 2014. The goal of CSRB is to launch a reference-type satellite named LIBRA in around 2025. We present the roadmap for CSRB as well as requirements and specifications for LIBRA. Key technologies of the system include miniature phase-change cells providing fixed-temperature points, a cryogenic absolute radiometer, and a spontaneous parametric down-conversion detector. LIBRA will offer measurements with SI traceability for the outgoing radiation from the Earth and the incoming radiation from the Sun with high spectral resolution. The system will be realized with four payloads, i.e., the Infrared Spectrometer (IRS), the Earth-Moon Imaging Spectrometer (EMIS), the Total Solar Irradiance (TSI), and the Solar spectral Irradiance Traceable to Quantum benchmark (SITQ). An on-orbit mode for radiometric calibration traceability and a balloon-based demonstration system for LIBRA are introduced as well in the last part of this paper. As a complementary project to the Climate Absolute Radiance and Refractivity Observatory (CLARREO) and the Traceable Radiometry Underpinning Terrestrial- and Helio- Studies (TRUTHS), LIBRA is expected to join the Earth observation satellite constellation and intends to contribute to space-based climate studies via publicly available data.

After nearly 50 years of development, Fengyun (FY) satellite ushered in its best moment. China has become one of the three countries or units in the world (China, USA, and EU) that maintain both polar orbit and geostationary orbit satellites operationally. Up to now, there are 17 Fengyun (FY) satellites that have been launched successfully since 1988. There are two FY polar orbital satellites and four FY geostationary orbit satellites operate in the space to provide a huge amount of the earth observation data to the user communities. The FY satellite data has been applied not only in the meteorological but also in agriculture, hydraulic engineering, environmental, education, scientific research and other fields. More recently, three meteorological satellites have been launched within the past two years. They are FY-4A on 11 December 2016, FY-3D on 15 November 2017 and FY-2H on 5 June 2018. This paper introduces the current status of FY meteorological satellites and data service. The updates of the latest three satellites have been addressed. The characteristics of their payloads on-boarding have been specified in details and the benefit fields have been anticipated separately.

FengYun-3 (FY-3) Visible Infrared Radiometer (VIRR), along with its predecessor, Multispectral Visible Infrared Scanning Radiometer (MVISR), onboard FY-1C&D have had continuous global observation more than 14 years. This data record is valuable for weather prediction, climate monitoring, and environment research. Data quality is vital for satellite data assimilations in Numerical Weather Prediction (NWP) and quantitative remote sensing applications. In this paper, the accuracies of radiometric calibration for VIRR onboard FY-3A and FY-3B, in thermal infrared (TIR) channels, are evaluated using the Low Earth Orbit (LEO)-LEO simultaneous nadir overpass intercalibration method. Hyperspectral and high-quality observations from Infrared Atmosphere Sounding Instrument (IASI) onboard METOP-A are used as reference. The biases of VIRR measurements with respect to IASI over one-and-a-half years indicate that the TIR calibration accuracy of FY-3B VIRR is better than that of FY-3A VIRR. The brightness temperature (BT) measured by FY-3A/VIRR is cooler than that measured by IASI with monthly mean biases ranging from −2 K to −1 K for channel 4 and −1 K to 0.2 K for channel 5. Measurements from FY-3B/VIRR are more consistent with that from IASI, and the annual mean biases are 0.84 ± 0.16 K and −0.66 ± 0.18 K for channels 4 and 5, respectively. The BT biases of FY-3A/VIRR show scene temperature-dependence and seasonal variation, which are not found from FY-3B/VIRR BT biases. The temperature-dependent biases are shown to be attributed to the nonlinearity of detectors. New nonlinear correction coefficients of FY-3A/VIRR TIR channels are reevaluated using various collocation samples. Verification results indicate that the use of the new nonlinear correction can greatly correct the scene temperature-dependent and systematic biases.

Accurate quantification of the distribution and variability of atmospheric CO₂ is crucial for a better understanding of global carbon cycle characteristics and climate change. Model simulation and observations are only two ways to globally estimate CO₂ concentrations and fluxes. However, large uncertainties still exist. Therefore, quantifying the differences between model and observations is rather helpful for reducing their uncertainties and further improving model estimations of global CO₂ sources and sinks. In this paper, the GEOS-Chem model was selected to simulate CO₂ concentration and then compared with the Greenhouse Gases Observing Satellite (GOSAT) observations, CarbonTracker (CT) and the Total Carbon Column Observing Network (TCCON) measurements during 2009–2011 for quantitatively evaluating the uncertainties of CO₂ simulation. The results revealed that the CO₂ simulated from GEOS-Chem is in good agreement with other CO₂ data sources, but some discrepancies exist including: (1) compared with GOSAT retrievals, modeled XCO₂ from GEOS-Chem is somewhat overestimated, with 0.78 ppm on average; (2) compared with CT, the simulated XCO₂ from GEOS-Chem is slightly underestimated at most regions, although their time series and correlation show pretty good consistency; (3) compared with the TCCON sites, modeled XCO₂ is also underestimated within 1 ppm at most sites, except at Garmisch, Karlsruhe, Sodankylä and Ny-Ålesund. Overall, the results demonstrate that the modeled XCO₂ is underestimated on average, however, obviously overestimated XCO₂ from GEOS-Chem were found at high latitudes of the Northern Hemisphere in summer. These results are helpful for understanding the model uncertainties as well as to further improve the CO₂ estimation.