The booming electric vehicle industry seeks fast charging solutions to address the safety risks posed by high-power charging, including thermal runaway and other safety issues. This study investigates the impact of combining liquid with thermoelectric cooling on battery thermal management. A series of experiments were conducted using various thermal batteries, liquid flow rates and batteries temperature thermoelectric. The experimental results compared air cooling (AC), water cooling (WC), and thermoelectric cooling (TEC) with different water flow (WF) rate in system and revealed that TEC with WF at 4.0 l/min was the best cooling system. This system can decrease the temperature by about 41-52% from the maximum temperature at discharge rates of 1.0, 1.5, 2.0, 2.5, and 3.0 °C. However, TEC with WF 1.0 and 2.0 l/min can effectively lower the temperature and reduce energy consumption compared to other cooling systems, while still maintaining the battery temperature within appropriate ranges.
1 March 2023 in Indonesian Journal of Electrical Engineering and Computer Science
Due to the effects of the change in temperature that have resulted in dramatic changes in the livelihoods of crickets. Hence, the implementation of cooling technologies is an important factor for alleviating these negative consequences. This research presents the experimentally investigate the feasibility of employing a thermoelectric cooler in combination with an evaporative air-cooling system for two-spotted cricket (Gryllus bimaculatus) rearing process. The proposed cooling system has been installed to reduce the temperature that appropriate for the cricket rearing. The experimental results show that the product air temperature of cricket rearing pens with thermoelectric evaporative air-cooling system decreases form ambient air. The average temperature of the cricket rearing pens with thermoelectric evaporative air-cooling system is 29.66 °C, with the highest temperature at 31.40 °C. While the average temperature of the cricket rearing pens without thermoelectric evaporative air-cooling system is 33.75 °C, with the highest temperature at 37.10 °C. Furthermore, this research also shows that this proposed system can improve cricket survival rate. The crickets that reared in the prototype system have a survival rate of 88.5%, while survival rate of crickets in an uncontrolled pen is 67.2%. This paper provides a potential of applying thermoelectric evaporative air-cooling for cricket farming.
1 October 2025 in Bulletin of Electrical Engineering and Informatics
Air pollution has become a global issue due to rapid urbanization and industrialization. Air quality monitoring is essential for mitigating the adverse effects of air pollution on public health and the environment. This study presents a solar-powered internet of thing (IoT)-based air quality monitoring system designed for autonomous operation in outdoor settings. The prototype integrates an ESP32 microcontroller with low-cost sensors for PM2.5, PM10, temperature, humidity, and heat index. Powered by a solar panel and battery, the system ensures off-grid functionality, while Wi-Fi transmission to the Blynk platform, enables real-time visualization, historical record storage, and instant user access through mobile dashboards. The system was calibrated against reference instruments and deployed for 14 consecutive days. Results confirmed stable data transmission and reliable performance that suitability for outdoor use without reliance on grid power under real-world conditions. Furthermore, correlation analysis showed a strong relationship between PM2.5 and PM10, and moderate associations with humidity. Regression analysis further identified humidity and heat index as the most significant predictors, while temperature exhibited only minor influence. These findings demonstrate the feasibility of a low-cost, portable, and energy-autonomous IoT monitoring system, providing accurate real-time insights to support evidence-based air quality management.
1 April 2024 in TELKOMNIKA (Telecommunication Computing Electronics and Control)
During the COVID-19 pandemic, online shopping grew rapidly, leading to more parcel deliveries. However, recipients are not always home to receive them. Some existing systems send alerts via SMS or email, but these methods often incur additional costs. To address this issue, we developed a smart parcel box. It uses IoT and solar power to work efficiently and sustainably, and it sends free delivery alerts through the LINE notify app, which is popular in Thailand. The prototype was tested using four parcel sizes: CD-sized (15×15×15 cm), 0+4 (17×11×10 cm), 2A (14×20×12 cm), and M-sized (27×43×20 cm). Results showed that the 0+4 parcel size had the fastest average detection and notification time of 8.42 s, followed by CD sized (9.81 s), 2A (9.9 s), and M-sized parcels (10.1 s). The M-sized parcel had the lowest standard deviation (SD) (0.42 s), while 0+4 was the least consistent (1.718 s). Differences in detection times were due to parcel size and placement but did not affect notifications. The system achieved 100% detection across all sizes, and the images allowed users to verify parcel details and sender information. These results demonstrate that the prototype is reliable, energy-efficient, and suitable for further development and adaptation in smart delivery systems.
1 December 2022 in Indonesian Journal of Electrical Engineering and Computer Science
This paper presents the results of investigations of the impact of parabolic pulsed heating on output voltage levels of a thermoelectric generator. The experiment was set up and tested under different test conditions. The output voltage levels were investigated. The experimental results showed that applying parabolic pulsed heating of 40, 60, 80 and 100 °C significantly maintained the output voltage levels of thermoelectric generator at about 80-95% which was different from steady heating case which was about 10-30% of maximum voltage level. Moreover, the parabolic pulse heating technique allows the heatsink to not be heated continuously and then the high temperature could be released out from a heat exchanger outside the heating period. This causes the next heating period to have a temperature difference between both sides of the device, and for that reason, could provide more power and efficiency.