Sun Limin

Dr. Sun Limin


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2012 in Journal of Biomaterials Applications
Verified
Journal Article
Open access
PDF file
Murugan RamalingamMurugan Ramalingam
Murugan Ramalingam
MYMarian Frances Young
Marian Frances Young
Vinoy ThomasVinoy Thomas
Vinoy Thomas
SLSun Limin
Sun Limin
LCLaurence C Chow
Laurence C Chow
CSCarl Simon
Carl Simon
We have designed a 2-spinnerette device that can directly electrospin nanofiber scaffolds containing a gradient in composition that can be used to engineer interfacial tissues such as ligament and tendon. Two types of nanofibers are simultaneously electrospun in an overlapping pattern to create a nonwoven mat of nanofibers containing a composition gradient. The approach is an advance over previous methods due to its versatility – gradients can be formed from any materials that can be electrospun. A dye was used to characterize the 2-spinnerette approach and applicability to tissue engineering was demonstrated by fabricating nanofibers with gradients in amorphous calcium phosphate nanoparticles (nACP). Adhesion and proliferation of osteogenic cells (MC3T3-E1 murine pre-osteoblasts) on gradients was enhanced on the regions of the gradients that contained higher nACP content yielding a graded osteoblast response. Since increases in soluble calcium and phosphate ions stimulate osteoblast function, we measured their release and observed significant release from nanofibers containing nACP. The nanofiber-nACP gradients fabricated herein can be applied to generate tissues with osteoblast gradients such as ligaments or tendons. In conclusion, these results introduce a versatile approach for fabricating nanofiber gradients that can have application for engineering graded tissues.

22 August 2022 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
SLSun Limin
Sun Limin
HHHua Huang
Hua Huang
SLShifeng Li
Shifeng Li
ZLZhenbang Liu
Zhenbang Liu
JTJie Tan
Jie Tan
ZDZhaoyun Duan
Zhaoyun Duan
This letter reports the successful development of an S-band short-length, high-efficiency, coaxial cavity multi-beam relativistic klystron amplifier (CCMB-RKA). The simulation in one-dimensional genetic algorithm, capable of giving high-efficiency parameters, predicted 67% efficiency of CCMB-RKA, taking the interaction length as 600 mm, beam voltage as 420 kV, and beam current as 230 A. However, for accurate results, the CCMB-RKA was simulated again using three-dimensional code CHIPIC, taking RF input power, beam voltage, and beam current as 4.4 kW, 420 kV, and 3.22 kA ( $= {14} \times {230}$ A, 14 being the beam number), respectively, predicting the output power, gain, and efficiency of the device as 810 MW, 53 dB, and 60%, respectively. Finally, the designed CCMB-RKA was built and experimented with. Through 20 groups of the comparative experiments, the GW-level RF output power of the device, typically, 1.027 GW (peak), 60 ns pulse was demonstrated with 55% efficiency, 370 phase jitter, and 53 dB gain, taking the RF input power, beam voltage, and beam current as 4.8 kW, 453 kV, and 4.1 kA, respectively. The results establish the potential of the CCMB-RKA developed for high-power microwave applications.

17 January 2022 in Electronics
Verified
Journal Article
Open access
PDF file
SLSun Limin
Sun Limin
HHHua Huang
Hua Huang
SLShifeng Li
Shifeng Li
ZLZhengbang Liu
Zhengbang Liu
HHHu He
Hu He
XFXianghe Fang
Xianghe Fang
To significantly improve the electronic efficiency of coaxial multi-beam relativistic klystron amplifier (CMB-RKA), the physical process of beam-wave interaction and parameters that affect efficiency was studied. First, the high efficiency of beam-wave interaction was discussed by simulating the efficiency versus the parameters (frequency of cavity, drift tube length between cavities, and external quality factor of output cavity), in the one-dimensional (1-D) large-signal simulation software. Moreover, the further physical process of beam-wave interaction was analyzed through simulating the current modulation factor and the number of particles at the entrance of the output cavity, in the three-dimensional (3-D) particle in cell simulation software. Last, with the optimal parameters in 3-D simulations, the CMB-RKA, which has 14 electron beams with a total current of 4.2 kA (14 × 300 A), can generate an output power of 1.02 GW with a saturation gain of 55.6 dB and an efficiency of 48.7%, when beam voltage is 500 kV, which indicated the CMB-RKA can achieve high efficiency for high-power microwave radiation.

21 October 2022 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
ZLZhenbang Liu
Zhenbang Liu
HHHua Huang
Hua Huang
SLShifeng Li
Shifeng Li
YMYu Miao
Yu Miao
XJXiao Jin
Xiao Jin
SLSun Limin
Sun Limin
In this paper, the stability of an X band gigawatt coaxial multi-beam relativistic klystron amplifier (CMB-RKA) operating in repetitively pulsed mode was investigated by the particle-in-cell (PIC) simulation and experiments. A four-gap extended-interaction output cavity was optimized to avoid electrons reflection. And a water-cooled electron beams collector which was integrated with the output mode converter was designed to reduce the plasma and secondary electrons. The explosive emission conditions were improved by using the C–C composite material cathode, and the titanium beam-wave interaction structure was used to replace the stainless steel structure. All these factors brought greater stability of the CMB-RKA. In the experiment, the X-band CMB-RKA can operate at a 20 pps repetition rate with duration of 120 seconds, when the output power was about 0.95 GW with pulse width of 160 ns. The long-term stability of the X-band CMB-RKA performances during 10 5 pulses was realized, which is driven by a long pulse compact accelerator.

26 October 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SLSun Limin
Sun Limin
HHHua Huang
Hua Huang
CLChaozheng Lu
Chaozheng Lu
BBB. N. Basu
B. N. Basu
JTJie Tan
Jie Tan
SLShifeng Li
Shifeng Li
The design, based on theory, simulation, and cold as well as hot tests, is proposed for a compact GW-level multibeam relativistic klystron amplifier (MB-RKA) with a low beam confining magnetic field in the $\textit{S}$ -band, which can operate repeatedly and stably up to 8 min. For this purpose, graphene cathodes and a microchannel water cooling system were used. For the sake of compactness, the input section of the MB-RKA was taken as a cylindrical conformal sectorial waveguide and the output section as an inner cylindrical coaxial waveguide. The experiments were performed with a magnetic field of 0.39 T. In the single-pulse operation, the output power, pulsewidth, gain, and efficiency of the device were experimentally found as 1.047 GW, 68 ns, 56 dB, and 37% respectively, when the beam voltage, beam current, and injected power were taken as 530 kV, 5.30 kA, and 2.40 kW, respectively. In the multipulse operation at a pulse repetition rate of 20 Hz, over a period of 8 min, the MB-RKA experimentally delivered the mean output power of 0.889 GW of 42-ns pulsewidth, taking the mean beam voltage and current as 551 kV and 5.14 kA, respectively.

24 June 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
Liang LiuLiang Liu
Liang Liu
YYYu Yang
Yu Yang
CYChuan Yu
Chuan Yu
SLShifeng Li
Shifeng Li
HWHao Wu
Hao Wu
FMFanbao Meng
Fanbao Meng
A W-band slot array antenna based on a substrate integrated waveguide (SIW) for microwave power transmission (MPT) is proposed in this paper. By size optimization, the transition from the rectifier element to the antenna is limited to a small size. It realizes a compact arrangement of the radiating slots, which not only improves the aperture efficiency of the antenna but also makes it easy to integrate into a large-scale array. For antenna testing, a coplanar waveguide–SIW–rectangular waveguide transition structure is added at the end of the antenna, and an antenna with this transition structure is processed by PCB printing technology and measured. The measured reflection coefficient is less than −10 dB at 90–96 GHz, the aperture efficiency is greater than 60% at 93.5–94.5 GHz, the maximum gain is 13.2 dB at 93.5 GHz, and the aperture efficiency is 79%. The test results of the antenna show that the antenna has a good performance and can be applied to the MPT system as a rectenna.