The poor phase stability of conventional 6–8 wt.% yttria-partially stabilized zirconia (YSZ) results in the formation of detrimental cracks in thermal barrier coatings (TBCs) as well as the decrease of fracture toughness, limiting its long-term application above 1200 °C. Here, we try to prove that a higher t′-phase stability is the prerequisite for the mechanical properties durability of ZrO2-based TBC materials. Compared with YSZ ceramic, 7.0 mol.% Sc2O3 and 0.5 mol.% Y2O3 co-stabilized ZrO2 (ScYSZ) shows a superior t′ phase stability at 1300 °C. In addition, the fracture toughness of ScYSZ is nearly stable after being annealed at 1300 °C for 0–40 h, while the value of YSZ gradually declines during the aging process. The stable fracture toughness of ScYSZ is closely related to its prominent t′ phase stability. The elastic modulus of ScYSZ is nearly unchanged and lower than that of YSZ. The excellent stability of the phase structure and mechanical properties makes ScYSZ a great potential material for next generation high-temperature TBCs.
The initiation and propagation of cracks are crucial to the reliability and stability of thermal barrier coatings (TBCs). It is important and necessary to develop an effective method for the prediction of the crack propagation behavior of TBCs. In this study, an extended finite element model (XFEM) based on the real microstructure of nanostructured TBCs was built and employed to elucidate the correlation between the microstructure and crack propagation behavior. Results showed that the unmelted nano-particles (UNPs) that were distributed in the nanostructured coating had an obvious “capture effect” on the cracks, which means that many cracks easily accumulated in the tensile stress zone of the adjacent UNPs and a complex microcrack network formed at their periphery. Arbitrarily oriented cracks mainly propagated parallel to the x-axis at the final stage of thermal cycles and the tensile stress was the main driving force for the spallation failure of TBCs. Correspondingly, I and I–II mixed types of cracks are the major cracking patterns.
A serious issue in the preparation of Al2O3 coatings by cathode plasma electrolytic deposition (CPED) is that the coatings have a porous structure, which is detrimental to their protective performance. Therefore, to address this problem, SiC nanoparticles are incorporated into the Al2O3 coating in this study. A series of Al2O3–SiC composite coatings are efficaciously prepared on the surface of 316L stainless steel by CPED. The microstructures, compositions and phase components of the composite coatings are characterized; the electrochemical corrosion resistance and tribological behavior are evaluated; and the mechanism of SiC nanoparticles in the coating formation process is discussed in detail. The results indicate that the Al2O3 coating prepared by CPED consists of α-Al2O3 and γ-Al2O3, and the former is the main crystalline phase. With the incorporation of SiC nanoparticles in the coating, the content of α-Al2O3 gradually decreases, almost disappearing, accompanied by an increase in γ-Al2O3 as the main crystalline phase. The incorporation of SiC nanoparticles significantly reduces the surface irregularity and roughness of Al2O3 coatings and remarkably improves the corrosion resistance and wear resistance of the Al2O3 coatings. The improvement in corrosion resistance and anti-wear properties can be explained by the fact that the SiC nanoparticles effectively weaken electrical breakdown and increase the compactness of the coatings.