Theoretical predictions as well as experiments performed at storage rings have shown that the lifetimes of β-radionuclides can change significantly as a function of the ionization state. In this paper we describe an innovative approach, based on the use of a compact plasma trap to emulate selected stellar-like conditions. It has been proposed within the PANDORA project (Plasmas for Astrophysics, Nuclear Decay Observation and Radiation for Archaeometry) with the aim to measure, for the first time in plasma, nuclear β-decay rates of radionuclides involved in nuclear-astrophysics processes. To achieve this task, a compact magnetic plasma trap has been designed to reach the needed plasma densities, temperatures, and charge-states distributions. A multi-diagnostic setup will monitor, on-line, the plasma parameters, which will be correlated with the decay rate of the radionuclides. The latter will be measured through the detection of the γ-rays emitted by the excited daughter nuclei following the β-decay. An array of 14 HPGe detectors placed around the trap will be used to detect the emitted γ-rays. For the first experimental campaign three isotopes, ¹⁷⁶Lu, ¹³⁴Cs, and ⁹⁴Nb, were selected as possible physics cases. The newly designed plasma trap will also represent a tool of choice to measure the plasma opacities in a broad spectrum of plasma conditions, experimentally poorly known but that have a great impact on the energy transport and spectroscopic observations of many astrophysical objects. Status and perspectives of the project will be highlighted in the paper.

This paper presents a fully integrated galvanically isolated dc-dc converter with data communication. The converter, which is fabricated in a 0.35-μm BCD technology, is made up of only two silicon dice and adopts two 6-kV on-chip transformers. It takes advantage of a customized architecture, which uses the isolated power control link to transfer bidirectional half-duplex data, thus reducing the overall silicon area and package size. The proposed dc-dc converter delivers up to 93-mW output power with 19% maximum power efficiency and an output voltage ranging from 2.4 V to 3.3 V, while achieving a data rate up to 50 Mb/s.

This article presents a W-band power amplifier (PA) for automotive radar applications. It was designed in a 28-nm fully depleted silicon-on-insulator CMOS technology with a transition frequency of around 270 GHz and a standard back-end-of-line. The circuit adopts a pseudo-differential topology with coupling transformers, which allow both compact matching networks and layout-optimized interstage interconnections. The power stage exploits a transformer-based folded-cascode structure that is very suitable for low-voltage mm-wave power applications. The PA is able to deliver a saturated output power as high as 13.5 dBm at 77 GHz with a power-added efficiency of 14.5%, while using a power supply as low as 1 V. The linear power gain is 26.5 dB and the current consumption is 150 mA. The PA occupies a core die size of 700 μm x 200 μm.

This paper presents a pseudodifferential power amplifier for 77-GHz automotive radar. The circuit is fabricated in a SiGe HBT BiCMOS technology featuring bipolar transistors with fT/f_max of 230/280 GHz. The amplifier adopts a transformer-coupling current-reuse approach to improve both gain and efficiency. An interstacked transformer is also profitably adopted to reduce output losses due to the differential-to-single-ended conversion. The amplifier exhibits a saturated power, a peak power-added efficiency, and a gain of 14.5 dBm, 9%, and 25 dB, respectively, thus achieving a first-rate figure-of-merit as high as 4755.

This paper reviews state-of-the-art approaches for galvanically isolated DC-DC converters based on radio frequency (RF) micro-transformer coupling. Isolation technology, integration level and fabrication issues are analyzed to highlight the pros and cons of fully integrated (i.e., two chips) and multichip systems-in-package (SiP) implementations. Specifically, two different basic isolation technologies are compared, which exploit thick-oxide integrated and polyimide standalone transformers, respectively. To this aim, previously available results achieved on a fully integrated isolation technology (i.e., thick-oxide integrated transformer) are compared with the experimental performance of a DC-DC converter for 20-V gate driver applications, specifically designed and implemented by exploiting a stand-alone polyimide transformer. The comparison highlights that similar performance in terms of power efficiency can be achieved at lower output power levels (i.e., about 200 mW), while the fully integrated approach is more effective at higher power levels with a better power density. On the other hand, the stand-alone polyimide transformer approach allows higher technology flexibility for the active circuitry while being less expensive and suitable for reinforced isolation.

This paper presents a 77-GHz automotive radar receiver in a 28-nm fully depleted silicon-on-insulator CMOS technology. It exploits a mixer-first direct-conversion architecture to trade-off noise and linearity performance. The receiver is composed of a 77-GHz downconverter, a variable-gain amplifier, and a switched-capacitor low-pass filter. It adopts an effective and robust approach for leakage suppression due to the TX to RX crosstalk, which overcomes both gain and linearity limitations. The receiver draws an overall quiescent current as low as 27 mA from a 1-V supply voltage and provides an overall gain up to 75 dB with a noise figure of 8.2 dB. Despite the low supply voltage, an excellent blocker immunity of -9.5 dBm is achieved along with an output 1-dB compression point as high as -1.5 dBV.