Ding Tian

Dr. Ding Tian

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
XHXiaoke He
Xiaoke He
CZChenjun Zhang
Chenjun Zhang
DTDing Tian
Ding Tian
Vanadate is an important functional material. It has been widely studied and applied in luminescence and photocatalysis. Vanadium compounds have been synthesized to investigate the thermal expansion properties and structure. Both BiVO4 and Co2V2O7 are monoclinic at room temperature, FeVO4’s crystal structure is triclinic, and CrVO4 is orthorhombic. The relatively linear, thermal-expansion, and temperature-dependent Raman spectroscopy results showed that the phase transition of BiVO4 occurred at 200 to 300 °C. The coefficient of thermal expansion (CTE) of Co2V2O7 was larger than that of the monoclinic structure BiVO4. The CTE of the tetragonal structure of BiVO4 was 15.27 × 10−6 °C−1 which was the largest CTE in our measurement results, and the CTE of anorthic structure FeVO4 was 2.84 × 10−6 °C−1 and was the smallest.

Verified
Journal Article
Open access
PDF file
L1lu 15690860224
lu 15690860224
Jianping YuanJianping Yuan
Jianping Yuan
Qiaorui SiQiaorui Si
Qiaorui Si
PJPeifeng Ji
Peifeng Ji
DTDing Tian
Ding Tian
JLJinfeng Liu
Jinfeng Liu
In previous AUV designs, the thrusters were often placed outside the vehicle, resulting in their performance being significantly influenced by the shape of the vehicle. Additionally, this placement also leads to the generation of strong radiated noise that propagates in all directions, making noise reduction challenging. Taking inspiration from the shape of sharks, this paper proposes a slender, shark-inspired AUV. The model features a continuous passageway in the middle where a pump-jet thruster is installed to provide propulsion. The walls of the passageway are then covered with sound-absorbing materials to reduce radiated noise. To address the problem of low design efficiency caused by multiple design parameters, a multi-objective optimization method is proposed to optimize the shape of the AUV. The performance targets of speed, displacement, and energy consumption are determined as objective functions, and a multi-island genetic algorithm is used as the optimization algorithm to build the multi-objective optimization process. An automated optimization platform was then developed which integrates parametric modeling, mesh partitioning, the CFD calculation, and the optimized design. To enhance the efficiency of optimization, a surrogate model was developed to approximate the CFD calculation. Using the optimal Latin hypercube method, experimental factors were designed, and a surrogate model was constructed based on the radial basis function approach. Following optimization, the resistance was reduced by 9.1%, while the displacement volume was increased by 10.7% and energy consumption was decreased by 6.3%. By analyzing the velocity and entropy production distribution of the AUV, the effectiveness of the optimization method was verified.

25 February 2022 in Machines
Verified
Journal Article
Open access
PDF file
XYXiao Yang
Xiao Yang
DTDing Tian
Ding Tian
Qiaorui SiQiaorui Si
Qiaorui Si
敏廖敏泉 廖敏泉
敏泉 廖敏泉
JHJiawei He
Jiawei He
ZLZhonghai Liu
Zhonghai Liu
As important parts of underground water conveyance equipment, diving tubular pumps are widely used in various fields related to the national economy. Research and development of submersible pumps with better performance have become green goals that need to be achieved urgently in low-carbon development. This paper provides an effective approach for the enhancement of the performance of a diving tubular pump by adopting computational fluid dynamics, one-dimensional theory, and response surface methodology. First, the flow loss characteristics of the pump under several flow rate conditions are analyzed by entropy production theory, and then the impeller and guide vanes are redesigned using the traditional one-dimensional theory. Then, the surface response experimental method is used to improve pump hydraulic efficiency. The streamline angle (A) of the front cover of the impeller blade, the placement angle (B) of the middle streamline inlet, and the placement angle (C) of the rear cover flowline inlet are the response variables to optimize the design parameters of the diving tubular pump. Results show that wall entropy production and turbulent kinetic energy entropy production play the leading role in the internal flow loss of the diving tubular pump, while viscous entropy production can be ignored. The flow loss inside the impeller is mainly concentrated at the inlet and the outlet of the impeller blade, and the flow loss inside the guide vane is mainly concentrated in the area near the guide vane and the entrance of the guide vane. A, B, and C are all significant factors that affect efficiency. The order of the influencing factors from strong to weak is as follows: A2 (p = 0.000) > C (p = 0.007) = A × B (p = 0.007) > B (p = 0.023) > B2 (p = 0.066) > A × C (p = 0.094) > A (p = 0.162) > C2 (p = 0.386) > A × B (p = 0.421). The best combination of response variables after surface response test design is A = 9°, B = 31°, and C = 36°. After optimization, the pump efficiency and the head of the model pump are increased by 32.99% and 18.71%, respectively, under the design flow rate. The optimized model pump is subjected to tests, and the test data and the simulation data are in good agreement, which proves the feasibility of using the surface response method to optimize the design of the model pump.

19 September 2025 in Water
Verified
Journal Article
Open access
PDF file
DTDing Tian
Ding Tian
XXXin Xia
Xin Xia
L1lu 15690860224
lu 15690860224
Jianping YuanJianping Yuan
Jianping Yuan
Qiaorui SiQiaorui Si
Qiaorui Si
This study aims to investigate the spatiotemporal evolution of cavitating flow and the associated acoustic responses around a NACA0015 hydrofoil. A coupled fluid–acoustic interaction model is developed by integrating a nonlinear cavitation model with vortex–sound coupling theory. Numerical simulations are conducted within a computational domain established for the hydrofoil to capture the interactions between cavitation dynamics and acoustic radiation. The results indicate that the temporal variations in cavity evolution and pressure fluctuations agree well with experimental observations. The simulations predict a dominant pressure fluctuation frequency of 30.15 Hz, consistent with the cavitation shedding frequency, revealing that the evolution of leading-edge vortex structures governs the periodic variations in the lift-to-drag ratio. Cavitation significantly modifies the development of vortex structures, with vortex stretching effects mainly concentrated near cavitation regions. The dilation–contraction term is closely associated with cavity formation, while the pressure–torque tilting term predominantly affects cloud cavitation collapse. Dynamic mode decomposition (DMD) shows that the coherent structures of the leading modes exhibit morphological similarity to multiscale cavitation and vortex structures. Furthermore, hydrofoil cavitation noise consists mainly of loading noise and cavitation-induced pulsating radiation noise, with surface acoustic sources concentrated in cloud cavitation shedding regions. The dominant frequency of cavitation-induced radiation noise is highly consistent with experimental measurements.

28 November 2025 in Water
Verified
Journal Article
Open access
PDF file
DTDing Tian
Ding Tian
KZKun Zhang
Kun Zhang
YJYuanzhe Ju
Yuanzhe Ju
YZYong Zhang
Yong Zhang
WPWang Peng
Wang Peng
Qiaorui SiQiaorui Si
Qiaorui Si
As key emergency equipment, high-flow pump devices play a vital role in urban flood control and drainage, and their hydraulic performance directly influences the safety and stability of the entire system. To meet diverse drainage demands during emergency operations, a new type of high-flow drainage pump, capable of operating in series, parallel, and variable-speed modes, has been developed. Using the SST k-ω turbulence model combined with entropy production theory and pressure pulsation analysis, unsteady numerical simulations were conducted to investigate the transient internal flow under series and parallel operating conditions. The numerical model was verified through comparison with experimental hydraulic-performance data, demonstrating good agreement. The results show that under series operation, the pump speed decreases from 1500 r/min to 193 r/min before reversing to −1748 r/min, while under parallel operation the runaway speed reaches −1657 r/min. The flow rate and torque exhibit strong nonlinear variations, with reverse flow and oscillatory behavior appearing in the impeller passages. During the runaway stage, entropy production peaks at 28.17 W/K under series conditions and 29.09 W/K under parallel conditions, with turbulent dissipation accounting for more than 69% of the total. High-entropy regions extend toward the impeller outlet, while energy losses are predominantly concentrated in the secondary suction chamber, contributing 47.56% and 57.12% under the respective conditions. Pressure pulsation analysis indicates that the dominant frequency components are concentrated at the blade-passing frequency (100 Hz) and its harmonics, with the strongest fluctuations near the primary impeller outlet. These results provide theoretical and engineering guidance for improving the efficiency and stability of emergency drainage systems.