In previous AUV designs, the thrusters were often placed outside the vehicle, resulting in their performance being significantly influenced by the shape of the vehicle. Additionally, this placement also leads to the generation of strong radiated noise that propagates in all directions, making noise reduction challenging. Taking inspiration from the shape of sharks, this paper proposes a slender, shark-inspired AUV. The model features a continuous passageway in the middle where a pump-jet thruster is installed to provide propulsion. The walls of the passageway are then covered with sound-absorbing materials to reduce radiated noise. To address the problem of low design efficiency caused by multiple design parameters, a multi-objective optimization method is proposed to optimize the shape of the AUV. The performance targets of speed, displacement, and energy consumption are determined as objective functions, and a multi-island genetic algorithm is used as the optimization algorithm to build the multi-objective optimization process. An automated optimization platform was then developed which integrates parametric modeling, mesh partitioning, the CFD calculation, and the optimized design. To enhance the efficiency of optimization, a surrogate model was developed to approximate the CFD calculation. Using the optimal Latin hypercube method, experimental factors were designed, and a surrogate model was constructed based on the radial basis function approach. Following optimization, the resistance was reduced by 9.1%, while the displacement volume was increased by 10.7% and energy consumption was decreased by 6.3%. By analyzing the velocity and entropy production distribution of the AUV, the effectiveness of the optimization method was verified.
This study aims to investigate the spatiotemporal evolution of cavitating flow and the associated acoustic responses around a NACA0015 hydrofoil. A coupled fluid–acoustic interaction model is developed by integrating a nonlinear cavitation model with vortex–sound coupling theory. Numerical simulations are conducted within a computational domain established for the hydrofoil to capture the interactions between cavitation dynamics and acoustic radiation. The results indicate that the temporal variations in cavity evolution and pressure fluctuations agree well with experimental observations. The simulations predict a dominant pressure fluctuation frequency of 30.15 Hz, consistent with the cavitation shedding frequency, revealing that the evolution of leading-edge vortex structures governs the periodic variations in the lift-to-drag ratio. Cavitation significantly modifies the development of vortex structures, with vortex stretching effects mainly concentrated near cavitation regions. The dilation–contraction term is closely associated with cavity formation, while the pressure–torque tilting term predominantly affects cloud cavitation collapse. Dynamic mode decomposition (DMD) shows that the coherent structures of the leading modes exhibit morphological similarity to multiscale cavitation and vortex structures. Furthermore, hydrofoil cavitation noise consists mainly of loading noise and cavitation-induced pulsating radiation noise, with surface acoustic sources concentrated in cloud cavitation shedding regions. The dominant frequency of cavitation-induced radiation noise is highly consistent with experimental measurements.
A numerical method using combined detached-eddy simulation (DES) and cavitation model considering the rotation effect is used for unsteady cavitation flow field of the centrifugal pump. Closed type pump test system was established to obtain the pump performance and pressure pulsation characteristics under different flow rates and cavitation condition, which provide boundary conditions and verification of calculations. Based on the calculation results of the unsteady flow field of the centrifugal pump cavitation, the entropy generation analysis of the flow field and the pressure fluctuation characteristics were carried out. Then the relationship between cavitation and the deterioration of the centrifugal pump performance and the generation of the unstable operation excitation force was tried to reveal. The internal energy loss is mainly concentrated in the impeller, volute, and pump cavity area, which accounts for more than 85% of the total entropy generation. The characteristic frequency of about 0.333 Strouhal Number appears at the volute tongue due to the cavitation flow spread downstream.