Recently, short basalt fibres (BFs) have been gaining considerable attention in the building materials industry because of their excellent mechanical properties and lower production cost than their counterparts. Reinforcing geopolymer composites with small volumes of fibres has been proven an efficient technique to enhance concrete’s mechanical properties and durability. However, to date, no study has investigated the effect of basalt fibers’ various lengths and volume content on self-compacted geopolymer concrete’s fresh and mechanical properties (SCGC). SCGC is prepared by mixing fly ash, slag, and micro fly ash as the binder with a solid alkali-activator compound named anhydrous sodium metasilicate (Na₂SiO₃). In the present study, a hybrid length of long and short basalt fibres with different weight contents were investigated to reap the benefits of multi-scale characteristics of a single fibre type. A total of 10 mixtures were developed incorporating a single length and a hybrid mix of long (30) mm and short (12) mm basalt fibres, with a weight of 1%, 1.5% and 2% of the total binder content, respectively. The fresh and mechanical properties of SCGC incorporating a hybrid mix of long and short basalt fibres were compared to plain SCGC and SCGC containing a single fibres length. The results indicate that the hybridization of long and short fibres in SCGC mixture yields better mechanical properties than single-length BF-reinforced SCGC. A hybrid fibre coefficient equation will be validated against the mechanical properties results obtained from the current experimental investigation on SCGC to assess its applicability for different concrete mixes.

Purpose: Concrete, the second most used material in the world, surpassed only by water, relies on a vast amount of cement. The process of cement production emits substantial amounts of carbon dioxide (CO₂). Consequently, it is crucial to search for cement alternatives. Geopolymer concrete (GC) uses industrial by-product material instead of traditional cement, which not only reduces CO₂ emissions but also enhances concrete durability. On the other hand, the disposal of concrete waste in the landfills represents a significant environmental challenge, emphasising the urgent need for sustainable solutions. This study aimed to investigate waste concrete's best form and rate as the alternative aggregates in self-compacting and ambient-cured GC to preserve natural resources, reduce construction and demolition waste and decrease pertinent CO₂ emissions. The binding material employed in this research encompasses fly ash, slag, micro fly ash and anhydrous sodium metasilicate as an alkali activator. It also introduces the best treatment method to improve the recycled concrete aggregate (RCA) quality.Design/methodology/approach: A total of25%, 50% and 100% of coarse aggregates are replaced with RCAs to cast self-compacting geopolymer concrete (SCGC) and assess the impact of RCA on the fresh, hardened and water absorption properties of the ambient-cured GC. Geopolymer slurry was used for coating RCAs and the authors examined the effect of one-day and seven-day cured coated RCA. The mechanical properties (compressive strength, splitting tensile strength and modulus of elasticity), rheological properties (slump flow, T500 and J-ring) and total water absorption of RCA-based SCGC were studied. The microstructural and chemical compositions of the concrete mixes were studied by the methods of energy dispersive X-Ray and scanning electron microscopy.Findings: It is evident from the test observations that 100% replacement of natural aggregate with coated RCA using geopolymer slurry containing fly ash, slag, micro fly ash and anhydrous sodium metasilicate cured for one day before mixing enhances the concrete's quality and complies with the flowability requirements. Assessment is based on the fresh and hardened properties of the SCGC with various RCA contents and coating periods. The fresh properties of the mix with a seven-day curing time for coated RCA did not meet the requirements for self-compacting concrete, while this mix demonstrated better compressive strength (31.61 MPa) and modulus of elasticity (15.39 GPa) compared to 29.36 MPa and 9.8 GPa, respectively, for the mix with one-day cured coated RCA. However, incorporating one-day-cured coated RCA in SCGC demonstrated better splitting tensile strength (2.32 MPa) and water absorption (15.16%).Research limitations/implications: A potential limitation of this study on SCGC with coated RCAs is the focus on the short-term behaviour of this concrete. This limited time frame may not meet the long-term requirements for ensuring the sustained durability of the structures throughout their service life.Originality/value: This paper highlights the treatment technique of coating RCA with geopolymer slurry for casting SCGC.

Purpose: This study aimed to review various existing methods for improving the quality of recycled concrete aggregates (RCAs) as a possible substitution for natural aggregates (NAs) in concrete. It is vital as the old paste attached to the RCA weakens its structure. It is due to the porous structure of the RCA with cracks, weakening the interfacial transition zone (ITZ) between the RCA and binding material, negatively impacting the concrete's properties. To this end, various methods for reinforcement of the RCA, cleaning the RCA's old paste and enhancing the quality of the RCA-based concrete without RCA modification are studied in terms of environmental effects, cost and technical matters. Furthermore, this research sought to identify gaps in knowledge and future research directions.Design/methodology/approach: The review of the relevant journal papers revealed that various methods exist for improving the properties of RCAs and RCA-based concrete. A decision matrix was developed and implemented for ranking these techniques based on environmental, economic and technical criteria.Findings: The identified methods for reinforcement of the RCA include accelerated carbonation, bio deposition, soaking in polymer emulsions, soaking in waterproofing admixture, soaking in sodium silicate, soaking in nanoparticles and coating with geopolymer slurry. Moreover, cleaning the RCA's old paste is possible using acid, water, heating, thermal and mechanical treatment, thermo-mechanical and electro-dynamic treatment. Added to these treatment techniques, using RCA in saturated surface dry (SSD) mixing approaches and adding fibres or pozzolana enhance the quality of the RCA-based concrete without RCA modification. The study ranked these techniques based on environmental, economic and technical criteria. Ultimately, adding fibres, pozzolana and coating RCA with geopolymer slurry were introduced as the best techniques based on the nominated criteria.Practical implications: The study supported the need for better knowledge regarding the existing treatment techniques for RCA improvement. The outcomes of this research offer an understanding of each RCA enrichment technique's importance in environmental, economic and technical criteria.Originality/value: The practicality of the RCA treatment techniques is based on economic, environmental and technical specifications for rating the existing treatment techniques.

The mechanical properties of the structural components (i.e., columns and beams produced from engineered bamboo products), such as, bamboo scrimber (also known as parallel bamboo strand lumber, PBSL) and Laminated Bamboo Lumber (LBL), have attracted considerable attention from researchers in recent years. In previous studies, researchers reported on the stress-strain behaviour of bamboo scrimber, LBL and glue laminated bamboo under compression and proposed some empirical and semi-empirical models, based on their individual studies. However, a generic constitutive model for engineered bamboo products is still not available. The compressive stress-strain curves of bamboo scrimber and LBL are reported to show a similar behaviour with three distinct stages i.e., a linear elastic stage followed by a nonlinear plastic stage and a plateau. As part of the current study, the previously proposed models for bamboo scrimber were carefully studied and all available material test results on engineered bamboo were used to develop a generic constitutive model, based on the Ramberg-Osgood (RO) formulation considering its suitability to capture its material nonlinearity. Based on the test results, it was observed that 1% proof stress can be used in a compound RO model to predict an accurate material response for bamboo scrimber. The proposed modelling technique has also been applied to predict the compressive behaviour of LBL. This paper proposes the RO coefficients for both bamboo scrimber and LBL that can be used to develop accurate nonlinear models for engineered bamboo products.