In this paper, aromatic petroleum resin (APR) was used as raw material. The fluorescence microscopic photography of styrene-butadiene-styrene block copolymer (SBS) modified asphalt with different contents of APR was carried out, and the effect of APR on the dispersion of SBS modified asphalt was quantitatively studied. The nano-surface morphology of SBS modified asphalt with different APR contents was tested by atomic force microscope (AFM), and the effects of APR content on AFM nanoscale parameters such as roughness and maximum amplitude were analyzed. In addition, this paper also tested the basic technical indexes of SBS modified asphalt with different APR contents and revealed its improvement law on the pavement performance of SBS modified asphalt. The results show that the use of APR is beneficial to the shearing of SBS into smaller particles. The larger the amount of APR, the smaller the maximum particle size and average particle size of SBS in asphalt and the smaller the roughness and maximum amplitude of SBS modified asphalt. APR can improve the viscosity and low-temperature ductility of SBS asphalt to a certain extent. High-temperature storage stability is improved obviously; SBS modified asphalt mixed with APR has a more dense spatial cross-linking structure after thorough development. The research results are helpful to reveal the mechanism of APR improving the performance of SBS polymer asphalt.
As an asphalt modifier, waste battery powder (WBP) has been proven to be possible. This paper studies the modification effect of WBP on asphalt. The Flight Test Instrumentation Requirements (FITR) of WBP, Dynamic Shear Rheology (DSR) test, and Full Section Fracture Energy Test (FSFET) of asphalt are carried out. The high-temperature rheological properties and low-temperature properties of WBP modified asphalt are analyzed. The high-temperature stability, low-temperature crack resistance and water stability of WBP modified asphalt mixture are tested. The research results show that the modification of asphalt by WBP is essentially physical modification but the mixing of WBP has a certain enhancement effect on the bond energy of the methylene group, which is helpful to improve the technical performance of modified asphalt. The proportion of elastic components in asphalt can be significantly increased by adding WBP, thus enhancing the deformation resistance of asphalt under high-temperature conditions. The dynamic shear modulus of 10% waste battery powder is about 1.5–2.0 times that of 0% waste battery powder. The mixing of WBP reduces the proportion of viscous components in asphalt which is unfavorable to the crack resistance under low temperatures. The greater the amount of WBP, the smaller the fracture energy density, the content of WBP is 6% and 10%, the fracture energy density is about 60–80% and 40–60% of the original asphalt, and the low temperature cracking resistance of asphalt decreases. The modification effect of WBP on asphalt is much lower than that of SBS.