Fatih İrfan BAŞ

Dr. Fatih İrfan BAŞ

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 October 2023 in Coatings
Verified
Journal Article
Open access
PDF file
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
EZElif Zorlu
Elif Zorlu
MCMuhammed Yasin Codur
Muhammed Yasin Codur
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
OYOzgen Yalcin
Ozgen Yalcin
EKEmre Kuskapan
Emre Kuskapan
The rapid growth of the world population and the rapid diversification of consumption habits due to technological advancements have increased waste production. An investigation of the effects of biomass products, such as waste vegetable oil and waste agricultural ash, on bitumen’s physical and chemical properties was conducted in this study. By recycling biomass products, this study aimed to improve the performance and stability of bituminous hot mixtures, optimize the number of additives, and create more economical designs. Using the Taguchi method, 0%, 2%, 4% by weight of waste vegetable oil and 0%, 3%, and 6% by weight of waste agricultural ash were added to 70/100 penetration pure bitumen with an orthogonal array of L9. For 10, 20, and 30 min, modified bitumen samples were prepared at 170 °C, 180 °C, and 190 °C with a constant mixing speed of 3000 RPM. The samples were tested for penetration, softening point, flash point, rolling thin film oven (RTFOT), FTIR, and Marshall Design stability and flow. Based on the obtained performance statistics, 95% confidence levels were assigned to the predictions. The stability and softening point values decreased as the oil content increased, while flash and penetration values increased. With increasing ash content, stability, flash, and softening point values increased, and penetration values decreased. Compared to oil and ash additives, mixing temperature and time had relatively little effect on the modification process. Overall, the optimum parameter levels were 4% for oil, 0% for ash, 170 °C for temperature, and 10 min for time.

24 November 2022 in Coatings
Verified
Journal Article
Open access
PDF file
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
HBHalim Ferit Bayata
Halim Ferit Bayata
This study aimed to determine the material properties and the thickness of the layers of an unbonded jointed plain concrete pavement design over a deteriorated flexible pavement that lost its service capability. Maximum principal stresses occurring under the concrete pavement should not exceed the modulus of rupture of the concrete. Three-dimensional finite element analyses using ANSYS (Release 18.1 SAS IP, Inc.) software were carried out with the Taguchi method. The most reliable solution for the pavement design was investigated with whole configuration axle loading that reflects the realistic traffic situation. The stress values under the concrete slab due to the positive temperature gradient neglected in the American Association of State Highway and Transportation Officials (AASHTO) method were also investigated. The concrete slabs are exposed to these stresses for longer than the axle loads. Temperature distributions throughout the thickness of the concrete slab were calculated with the bilinear formulas suggested in the study. Axle loadings were applied on both the pavement edge and corner to reflect the most critical loading condition in the pavement design. The critical axle type was found to be 1.2. It was observed that a 0.15 m concrete thickness was appropriate for the concrete class, joint spacing and hot mix asphalt (HMA) elasticity modulus levels used for the 1.22, 1.122, and 1.2 + 111 axle types, but it was not appropriate for the 1.2 axle types. The slab thicknesses calculated with the AASHTO method, and the finite element method were found to be close to each other. It was determined that the concrete thickness significantly affected the maximum principal stress, with a performance statistic (S/N) value of 1692 for the 1.2 axle type. This was followed by the modulus of elasticity of the concrete with an S/N value of 0.356, the modulus of elasticity of the existing flexible pavement with an S/N value of 0.244, and the concrete joint spacing with an S/N value of 0.105. A practical design guide was recommended to extend the service life of a highly deteriorated flexible pavement with the construction of unbonded jointed plain concrete.

9 February 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MÇMustafa Çakı
Mustafa Çakı
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
Flexible pavements stand out as the most commonly used worldwide, compared to rigid and composite pavements, owing to their versatility and widespread application. The use of hot mix asphalt (HMA) in flexible pavements causes significant environmental concerns due to high CO2 emissions and energy consumption, whereas warm mix asphalt (WMA) technologies have gained popularity in recent decades, offering a more sustainable alternative by enabling asphalt production at lower temperatures. WMA technologies can be categorized into three main groups: foaming, organic additives, and chemical additives, with each offering distinct benefits for performance and environmental impact. One of the chemical additives used in WMA production is Cecabase RT BIO10. In this study, virgin bitumen with 50/70 penetration was modified by adding Cecabase RT BIO10 at four levels: 0%, 0.3%, 0.4%, and 0.5% by weight. The experimental design employed a Taguchi L16 orthogonal array to systematically evaluate the effects of various factors on modified bitumen performance. Binders were prepared at four temperatures (110 °C, 120 °C, 130 °C, and 140 °C), four mixing durations (15, 20, 25, and 30 min), and four mixing speeds (1000, 2000, 3000, and 4000 rpm), enabling an efficient analysis of each parameter’s impact. The prepared binders were subjected to a series of tests, including penetration, softening point, flash point, rotational thin film oven test (RTFOT), elastic recovery, Marshall stability, ultrasonic pulse velocity (UPV), and FTIR analysis. These tests were conducted to investigate the effects of various parameters and levels on the binder properties. Additionally, stiffness and seismic modules were evaluated to provide a more comprehensive understanding of the binder’s performance. The experiment results revealed that the penetration, elastic recovery percentage, and Marshall stability increased with increasing additive content while the softening point and RTFOT mass loss decreased. At a high service temperature of 40 °C, the stiffness modulus of the modified bitumen decreased slightly. At a low service temperature of −10 °C, it decreased further. Additionally, the incorporation of Cecabase RT BIO10 led to an increase in the seismic modulus. Through optimization using the Taguchi method, the optimal levels were determined to be a 0.4% Cecabase RT BIO10 ratio, 140 °C mixing temperature, 30 min mixing time, and 1000 RPM mixing speed. The optimal responses for each test were identified and integrated into a unified optimal response, resulting in a comprehensive design guide with 95% confidence level estimates for all possible level combinations.

27 September 2024 in Geomatik
Verified
Journal Article
Closed access
HBHalim Ferit Bayata
Halim Ferit Bayata
YMYunus Emre Mazlum
Yunus Emre Mazlum
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
2023 yılında Kahramanmaraş'ta meydana gelen ikiz depremler, afet koordinasyonu ve afet öncesi durum analizinin gerekliliğini ortaya koymuştur. Bu tür afetlerle başa çıkmak ve olası kayıpları önleyecek tedbirleri almak için, bir şehrin yapı stoğunun deprem riskleri açısından değerlendirilmesi, ulaşım ağının, acil toplanma ve geçici barınma alanlarının yeterliliğinin değerlendirilmesi gibi kapsamlı bir hazırlık süreci gerekmektedir. Bu çalışmada, geçmişte birçok kez büyük depremlerle yıkılmış olan Erzincan İli çalışma alanı olarak seçilmiştir. Coğrafi Bilgi Sistemleri (CBS) tabanlı sokaktan tarama yöntemleri kullanılarak deprem riski taşıyan yapıların belirlenerek risk haritalarının oluşturulması, yapı performans değerlendirmelerinin yapılması ve olası bir afet durumunda güvenli ulaşım güzergahlarının belirlenmesi amaçlanmıştır. Erzincan il merkezindeki 2000 yılından önce inşa edilmiş, iki kat ve üzeri betonarme-yığma yapıların 3.199 adet olduğu tespit edilmiştir. Olası bir deprem durumunda ulaşım altyapısı analiz edilerek trafik yoğunluğu, acil toplanma ve geçici barınma alanlarının haritaları oluşturulmuştur. Yapılan analizlerde acil toplanma ve geçici barınma alanlarının kapasitelerinin artırılması gerektiği tespit edilmiştir. Artırılmış trafik yoğunluğu senaryolarında, 10 mahallede mevcut yolların afet-acil durumlarına uygun olmadığı tespit edilmiştir.

31 August 2019 in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Verified
Journal Article
Closed access
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
MGMahir Gökdağ
Mahir Gökdağ
Human factor has appeared as the most important factor in traffic accidents. It has statistically been revealed that the rate of defect in death and injuries of drivers, passengers and pedestrians has reached up to 99%. This has necessitated the analysis of human behaviors in traffic accidents as driver, pedestrian and passengers. In this study, the effect of fatigue and sleeplessness upon behaviors of drivers was investigated. Even driving and resting periods’ being determined with legal regulations could not provide drivers to display adequate level of sensitivity. And this caused drivers to drive until service points or their destination, and therefore the possibility of their being involved in an accident due to sleeplessness and fatigue increased. Suggestions were offered to prevent and decrease these considering the fatal results of traffic accidents.

5 August 2025 in Construction and Building Materials
Verified
Journal Article
Closed access
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
ÖKÖmer Faruk Keleş
Ömer Faruk Keleş
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
ADAhmet Oğuz Demiriz
Ahmet Oğuz Demiriz