Muhammed Ali Çolak

Dr. Muhammed Ali Çolak

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 October 2023 in Coatings
Verified
Journal Article
Open access
PDF file
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
EZElif Zorlu
Elif Zorlu
MCMuhammed Yasin Codur
Muhammed Yasin Codur
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
OYOzgen Yalcin
Ozgen Yalcin
EKEmre Kuskapan
Emre Kuskapan
The rapid growth of the world population and the rapid diversification of consumption habits due to technological advancements have increased waste production. An investigation of the effects of biomass products, such as waste vegetable oil and waste agricultural ash, on bitumen’s physical and chemical properties was conducted in this study. By recycling biomass products, this study aimed to improve the performance and stability of bituminous hot mixtures, optimize the number of additives, and create more economical designs. Using the Taguchi method, 0%, 2%, 4% by weight of waste vegetable oil and 0%, 3%, and 6% by weight of waste agricultural ash were added to 70/100 penetration pure bitumen with an orthogonal array of L9. For 10, 20, and 30 min, modified bitumen samples were prepared at 170 °C, 180 °C, and 190 °C with a constant mixing speed of 3000 RPM. The samples were tested for penetration, softening point, flash point, rolling thin film oven (RTFOT), FTIR, and Marshall Design stability and flow. Based on the obtained performance statistics, 95% confidence levels were assigned to the predictions. The stability and softening point values decreased as the oil content increased, while flash and penetration values increased. With increasing ash content, stability, flash, and softening point values increased, and penetration values decreased. Compared to oil and ash additives, mixing temperature and time had relatively little effect on the modification process. Overall, the optimum parameter levels were 4% for oil, 0% for ash, 170 °C for temperature, and 10 min for time.

28 May 2025 in Urban Science
Verified
Journal Article
Open access
PDF file
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
OBOsman Ünsal BAYRAK
Osman Ünsal BAYRAK
Urban transportation systems are increasingly strained by population growth, changing mobility patterns, and the need for sustainable infrastructure planning. The accurate modeling of urban trip generation is critical for effective and sustainable transportation planning, especially in the context of rapidly growing urban populations and evolving travel behaviors. This study investigated the application of advanced statistical methods and artificial intelligence-based techniques for forecasting urban travel demand. Erzincan, with a population of approximately 200,000, serves as a representative mid-sized city, offering valuable insights for transportation planning and traffic management. Data collected from various user groups, including households and university students, provide a comprehensive understanding of local travel behavior. Four predictive modeling techniques, linear regression, Poisson regression, negative binomial regression, and artificial neural networks (ANNs), were applied to the dataset, followed by a comparative performance evaluation. Additionally, a macro-level simulation was conducted using VISUM (Release 18.2.22) software to evaluate the current transportation network and assess the potential impacts of proposed improvement scenarios. The results show that the ANN model provided the highest predictive accuracy for household-based data (R2 = 0.62), while the linear regression model yielded the best results for dormitory-based data (R2 = 0.95). Furthermore, Poisson regression proved most effective in estimating the minimum trip generation time, which was estimated to be 22.77 min under simulated conditions. The study offers practical insights for transport planners and policymakers by demonstrating how predictive analytics and simulation tools can be integrated to address urban mobility challenges.

27 September 2024 in Geomatik
Verified
Journal Article
Closed access
HBHalim Ferit Bayata
Halim Ferit Bayata
YMYunus Emre Mazlum
Yunus Emre Mazlum
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
2023 yılında Kahramanmaraş'ta meydana gelen ikiz depremler, afet koordinasyonu ve afet öncesi durum analizinin gerekliliğini ortaya koymuştur. Bu tür afetlerle başa çıkmak ve olası kayıpları önleyecek tedbirleri almak için, bir şehrin yapı stoğunun deprem riskleri açısından değerlendirilmesi, ulaşım ağının, acil toplanma ve geçici barınma alanlarının yeterliliğinin değerlendirilmesi gibi kapsamlı bir hazırlık süreci gerekmektedir. Bu çalışmada, geçmişte birçok kez büyük depremlerle yıkılmış olan Erzincan İli çalışma alanı olarak seçilmiştir. Coğrafi Bilgi Sistemleri (CBS) tabanlı sokaktan tarama yöntemleri kullanılarak deprem riski taşıyan yapıların belirlenerek risk haritalarının oluşturulması, yapı performans değerlendirmelerinin yapılması ve olası bir afet durumunda güvenli ulaşım güzergahlarının belirlenmesi amaçlanmıştır. Erzincan il merkezindeki 2000 yılından önce inşa edilmiş, iki kat ve üzeri betonarme-yığma yapıların 3.199 adet olduğu tespit edilmiştir. Olası bir deprem durumunda ulaşım altyapısı analiz edilerek trafik yoğunluğu, acil toplanma ve geçici barınma alanlarının haritaları oluşturulmuştur. Yapılan analizlerde acil toplanma ve geçici barınma alanlarının kapasitelerinin artırılması gerektiği tespit edilmiştir. Artırılmış trafik yoğunluğu senaryolarında, 10 mahallede mevcut yolların afet-acil durumlarına uygun olmadığı tespit edilmiştir.

5 August 2025 in Construction and Building Materials
Verified
Journal Article
Closed access
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
ÖKÖmer Faruk Keleş
Ömer Faruk Keleş
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
ADAhmet Oğuz Demiriz
Ahmet Oğuz Demiriz

8 November 2026 in Journal of Transportation Engineering, Part B: Pavements
Verified
Journal Article
Closed access
PDF file
ÖDÖzge Demir
Özge Demir
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
Hot-mix asphalt (HMA) production requires high processing temperatures, which increase energy consumption and greenhouse gas emissions, posing serious challenges to environmental sustainability. As a more eco-efficient alternative, warm-mix asphalt (WMA), enable production at lower temperatures and offer significant environmental and economic benefits. The performance of WMA binders depends not only on the type and amount of additive used but also on the combined influence of main production factors, including mixing temperature, time, and speed. In this study, these effects were examined using a Taguchi L16 experimental design. A 70/100 penetration-grade virgin bitumen was modified with a surface-active chemical additive known as Cecabase RT 945 at dosages of 0%, 0.3%, 0.4%, and 0.5% by weight. Binder samples were prepared under controlled conditions with four-level factors for temperature (120°C, 130°C, 140°C, 150°C), mixing time (5, 10, 15, 20 min), and mixing speed (1,000 rpm, 2,000 rpm, 3,000 rpm, 4,000 rpm). The modified binders were evaluated through penetration, softening point, flash point, short-term aging [rolling thin film oven test (RTFOT)], elastic recovery, Marshall stability, stiffness modulus between − 15 ° C and +°C, and FTIR spectroscopy. Results showed that increasing additive content enhanced penetration, elastic recovery, and Marshall stability but reduced softening point and mass loss after aging. Stiffness modulus remained stable at 40°C but significantly decreased at − 15 ° C , indicating improved low-temperature flexibility and enhanced resistance to thermal cracking. The optimal production combination was determined to be 0.3% additive, 140°C mixing temperature, 15-min mixing, and 3,000-rpm mixing speed at a 95% confidence level. This study goes beyond conventional approaches by evaluating the interaction between additive content and key production variables across all levels. Consistent results were obtained even under limited conditions such as reduced mixing time and speed, which are commonly encountered in field practice. As a result, binder behavior could be reliably predicted under varying scenarios, offering a practical and adaptable design strategy. These findings help bridge the gap between laboratory research and on-site application, providing practitioners with a strong foundation for more flexible and sustainable WMA mixtures.

7 August 2026 in Coatings
Verified
Journal Article
Open access
PDF file
ÖKÖmer Faruk Keleş
Ömer Faruk Keleş
MÇMuhammed Ali Çolak
Muhammed Ali Çolak
ADAhmet Oğuz Demiriz
Ahmet Oğuz Demiriz
FBFatih İrfan BAŞ
Fatih İrfan BAŞ
In this study, the combined effect of waste lubricating oil (WLO) and waste pine branch ash (WPBA) was investigated to improve the low-temperature fracture behavior of asphalt mixtures. To investigate the low-temperature fracture behavior of the mixtures containing 2%–6% WLO and 3%–12% WPBA, the semi-circular bending (SCB) test was conducted at −15 °C, and the experimental results were analyzed using a statistical approach. Fracture toughness (K(IC)), total fracture energy (GF) and its pre-peak and post-peak components, crack resistance index (CRI), flexibility index (FI), and toughness index (TI) were determined. The findings indicate that the optimal combination depends on the fracture parameter under consideration. The best fracture toughness results, K(IC) = 24.96 MPa·mm0.5, indicating increased resistance to crack initiation, was obtained at 4% WLO and 12% WPBA content. On the other hand, the best fracture energy results, GF = 1.202 N/mm, reflecting an increase in energy dissipation during crack propagation, was obtained at 4% WLO and 9% WPBA content. The highest FI, CRI, and TI values were obtained with 6% WLO and 9% WPBA, corresponding to increases of approximately 66%, 69%, and 16%, respectively, compared with the reference mixture. This resulted in greater crack-initiation resistance, improved post-peak deformation capacity, and higher energy-dissipation capacity, although the greater WLO content led to a decrease in structural integrity. When the results are evaluated overall, it is understood that the use of WLO in the mixtures increases deformation capacity, while the use of WPBA controls crack propagation through its hardening and filling effects. In mixtures containing 4% WLO and 9%–12% WPBA, a balanced behavior was achieved in terms of crack initiation, crack propagation, and stiffness under low-temperature conditions.