Libor Beránek

Dr. Libor Beránek

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
ZPZdeněk Pitrmuc
Zdeněk Pitrmuc
JŠJan Šimota
Jan Šimota
LBLibor Beránek
Libor Beránek
PMPetr Mikeš
Petr Mikeš
VAVladislav Andronov
Vladislav Andronov
FHFrantišek Holešovský
František Holešovský
This paper aims at an in-depth and comprehensive analysis of mechanical and microstructural properties of AISI 316L austenitic stainless steel (W. Nr. 1.4404, CL20ES) produced by laser powder bed fusion (LPBF) additive manufacturing (AM) technology. The experiment in its first part includes an extensive study of the anisotropy of mechanical and microstructural properties in relation to the built orientation and the direction of loading, which showed significant differences in tensile properties among samples. The second part of the experiment is devoted to the influence of the process parameter focus level (FL) on mechanical properties, where a 48% increase in notched toughness was recorded when the level of laser focus was identical to the level of melting. The FL parameter is not normally considered a process parameter; however, it can be intentionally changed in the service settings of the machine or by incorrect machine repair and maintenance. Evaluation of mechanical and microstructural properties was performed using the tensile test, Charpy impact test, Brinell hardness measurement, microhardness matrix measurement, porosity analysis, scanning electron microscopy (SEM), and optical microscopy. Across the whole spectrum of samples, performed analysis confirmed the high quality of LPBF additive manufactured material, which can be compared with conventionally produced material. A very low level of porosity in the range of 0.036 to 0.103% was found. Microstructural investigation of solution annealed (1070 °C) tensile test samples showed an outstanding tendency to recrystallization, grain polygonization, annealing twins formation, and even distribution of carbides in solid solution.

9 September 2022 in Metals
Verified
Journal Article
Open access
PDF file
LRLudmila Růžičková
Ludmila Růžičková
JSJana Sobotová
Jana Sobotová
LBLibor Beránek
Libor Beránek
LPLukáš Pelikán
Lukáš Pelikán
JŠJan Šimota
Jan Šimota
This paper evaluates the effect of stress-relieving heat treatment on the AlSi10Mg alloy prepared by additive manufacturing using the Laser Powder Bed Fusion (L-PBF) with print parameters: 370 W, 1400 m/s, and 50 μm. The as-built state and four different annealing modes (240 °C/2 h, 240 °C/6 h, 300 °C/2 h, and 300 °C/2 h/water-quenched) are investigated. To determine the effect of the annealing mode on the mechanical properties of the L-PBF AlSi10Mg alloy, heat-treated samples were compared with the as-built state and with each other. The mechanical properties of the samples were determined by tensile and hardness tests. The strength in the as-built state is 488 MPa, depending on the method of heat treatment, the strength values range from 296 MPa to 417 MPa, and the HV10 hardness values are in accordance with the measured strength values. Furthermore, the microstructure of the samples was investigated by scanning electron microscopy (SEM) analysis, which was then linked to the measured mechanical properties. The composition of the microstructure of the alloy and its influence on the mechanical properties were determined by energy dispersive spectroscopy (EDS) analysis. Furthermore, the differences between the individual heat treatments in comparison with the as-built state were analyzed and the phenomenon of decomposition of the silicon network after reaching specific temperatures was discussed and confirmed. The paper evaluates the effect of dwelling time on stress relief annealing. It was found that if annealing at intermediate temperatures of 240 and 300 °C is applied, changes in structure and mechanical properties are more temperature- than dwell-time-dependent.

1 May 2024 in International Journal of Fatigue
Verified
Journal Article
Closed access
MMMartin Matušů
Martin Matušů
LRLudmila Růžičková
Ludmila Růžičková
Jan PapugaJan Papuga
Jan Papuga
JRJakub Rosenthal
Jakub Rosenthal
JŠJan Šimota
Jan Šimota
LBLibor Beránek
Libor Beránek

17 July 2023 in Polymers
Verified
Journal Article
Open access
PDF file
VAVladislav Andronov
Vladislav Andronov
LBLibor Beránek
Libor Beránek
VKVojtěch Krůta
Vojtěch Krůta
LHLucie Hlavůňková
Lucie Hlavůňková
ZJZdeňka Jeníková
Zdeňka Jeníková
This study presents a comprehensive techno-economic analysis of PLA materials for fused filament fabrication (FFF) from eight European manufacturers. The comparison involved rigorous experimental assessments of the mechanical properties, dimensional accuracy, and print quality using standardized methods and equipment such as tensile and CT testing. What makes this study unique is the consistent methodology applied, considering factors such as material color, printing temperature, printing orientation, filament diameter, and printer selection, to ensure meaningful and reliable results. Contrary to the common belief that a higher price implies better quality, the study revealed that the second cheapest PLA material achieved the best overall performance within the methodology employed. The study also confirmed certain observations, such as the influence of printing orientation and geometry on dimensional accuracy and mechanical properties, as well as the significant disparities between manufacturer-provided values and actual measured mechanical properties, highlighting the importance of experimental verification. Hence, the findings of this study hold value not only for the scientific community but also for hobbyist printers and beginners in the 3D printing realm seeking guidance in material selection for their projects. Furthermore, the methodology employed in this research can be adapted for evaluating a broad range of other 3D printing materials.

26 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
VAVladislav Andronov
Vladislav Andronov
JŠJan Šimota
Jan Šimota
LBLibor Beránek
Libor Beránek
JBJiří Blažek
Jiří Blažek
FRFilip Rušar
Filip Rušar
The purpose of this study was to find and optimize the process parameters of producing tool steel 1.2709 at a layer thickness of 100 μm by DMLS (Direct Metal Laser Sintering). HPDC (High Pressure Die Casting) tools are printed from this material. To date, only layer thicknesses of 20–50 μm are used, and parameters for 100 µm were an undescribed area, according to the state of the art. Increasing the layer thickness could lead to time reduction and higher economic efficiency. The study methodology was divided into several steps. The first step was the research of the single-track 3D printing parameters for the subsequent development of a more accurate description of process parameters. Then, in the second step, volume samples were produced in two campaigns, whose porosity was evaluated by metallographic and CT (computed tomography) analysis. The main requirement for the process parameters was a relative density of the printed material of at least 99.9%, which was achieved and confirmed using the parameters for the production of the samples for the tensile test. Therefore, the results of this article could serve as a methodological procedure for optimizing the parameters to streamline the 3D printing process, and the developed parameters may be used for the productive and quality 3D printing of 1.2709 tool steel.

5 October 2023 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
OSOndrej Stransky
Ondrej Stransky
LBLibor Beránek
Libor Beránek
Sunil PathakSunil Pathak
Sunil Pathak
JKJan Kaufman
Jan Kaufman
MBMarek Böhm
Marek Böhm
ZSZbyněk Soukup
Zbyněk Soukup