We report on the optical commissioning of the high power laser beam circulator for the high brightness Compton $\gamma$-ray source Extreme Light Infrastructure for Nuclear Physics. Tests aiming at demonstrating the optical performances of the laser beam circulator have been realized with a low-power pulsed laser-beam system and without electron beam. We show that, with the developed alignment and synchronization methods coming from the laser beam circulator design study presented in the Dupraz et al. paper [Phys. Rev. Accel. Beams 17, 033501 (2014)], the laser beam circulator enhances the laser-beam power available at the interaction point by a factor in excess of 25. This corresponds to a potential of bringing the average laser-beam power in excess of 1 kW when the laser beam circulator is injected with the interaction point laser-beam pulse energy of 400 mJ at 100 Hz.

In a medical accelerator, real-time monitoring systems of the beam and dose delivered to the patient are mandatory. In this work, we present a compact current profile detector that has been designed and tested in the framework of the TOP-IMPLART (Intensity Modulated Proton Linear Accelerator for RadioTerapy) project. This project foresees the realization of a proton linear accelerator, currently under construction at ENEA Frascati, for proton therapy applications. The linac produces a pulsed proton beam with 3 µs duration at 50 Hz repetition rate with a pulse current between 0.5 and 50 μA. A large dynamic range and spatial constraints make the use of usual noninterceptive beam diagnostics unfeasible. Therefore, the use of a beam current monitor based on a passive RF cavity working in the TM010 mode has been proposed. This paper reports the electromagnetic design of the device guided by a simplified analytical model. A prototype of such a device has been realized, characterized, and tested on the linac with a 35 MeV beam varying the beam current. The test results in air and in vacuum, together with the signal detection systems used, are presented.

Beam stability and timing jitter in modern linear accelerators are becoming increasingly important. In particular, if a magnetic or radio-frequency (RF) compression regime is employed, the beam time of arrival jitter at the end of the linac can be strictly correlated with the phase noise of the accelerating fields of the RF structure working off-crest. For this reason, since 2008, an RF fast-feedback technique, which acts within each RF pulse, has been successfully employed at LNF-INFN (Laboratori Nazionali di Frascati dell’Istituto Nazionale di Fisica Nucleare) in the SPARC_LAB (Sources for Plasma Accelerators and Radiation Compton with Laser And Beam) facility on S-band (2856 MHz) klystrons powered by pulse-forming network (PFN) modulators, as reported in this paper. However, in order to meet the more stringent requirements of plasma wakefield acceleration schemes, some upgrades to this feedback system have been recently carried out. The first prototype has been experimentally tested on a C-band (5712 MHz) klystron, driven by a solid-state modulator, in order to investigate the possibility for additional improvement resulting from the inherently more stable power source. In this paper, the design, realization and the preliminary measurement results obtained at SPARC_LAB after such upgrades will be reviewed.

The SPARC_LAB facility, operating at the LNF-INFN laboratories in Frascati, has been devoted over the past years to R&D related to accelerators, advanced diagnostics, and generation of radiation ranging from THz to extreme UV light. The facility has recently been significantly upgraded and moved toward user-oriented applications, especially after the approval of two additional projects with the goal to develop radiation sources up to the soft x-ray range and in view of the EuPRAXIA project, whose preparatory phase is ongoing with the support of the European Commission. This paper summarizes the electron beam and radiation parameters and describes the layout and main features of the upgraded facility in view of future user-oriented experimental activities and applications.