Timber buildings are increasing in their dimensions. Structural robustness is imperative for all buildings and specifically important for tall buildings. Lives can be saved if disproportionate collapse can be avoided after a catastrophic event (e.g. accident, terrorism). The literature about robustness is comprehensive concerning concrete and steel buildings, but is rather limited regarding timber. This paper reviews robustness in general and robustness of timber buildings in particular. Robustness is an intrinsic structural property, enhancing global tolerance to local failures, regardless of the cause. A deterministic approach to assess robustness is to remove certain load-bearing elements from the structure and compare the consequences to given limits. Design methods for robustness may be direct by assessing effects of local failure, or indirect by following guidelines. For robust timber buildings, the connections are the key aspects. Usually, metal connectors may provide the required joint ductility. For robust light timber-frame construction, rim beams may be designed. For timber posts and beams and cross laminated timber, guidance regarding robustness is scarce, but in some aspects they seem to be similar to steel frames and precast concrete. Future research should assess the capacity of connections, and evaluate the adequacy of seismic connectors for robust timber buildings.
1 May 2020 in Proceedings of the Institution of Civil Engineers - Structures and Buildings
Multi-storey cross-laminated timber (CLT) buildings are a comparatively recent construction type. Knowledge concerning the performance of CLT buildings regarding the prevention of disproportionate collapse after unforeseeable events (e.g. accidents or acts of terrorism) is not as refined as that for concrete and steel buildings. In particular, alternative load paths (ALPs) after the removal of a wall panel in platform-framed variants have not yet been studied in detail. The goal of this work was therefore to study ALPs in CLT buildings. An eight-storey bay of an existing building was evaluated by conducting a non-linear static pushdown analysis in a finite element analysis on three representative storeys. The analyses accounted for single fastener behaviour, timber crushing, friction, brittle failure and large deformations. The force–deformation behaviours elicited under the pushdown analyses were subsequently inserted in a simplified dynamic model to evaluate the transient response of the entire bay. Four ALPs were identified in this case – shear resistance in the floor panels, arching action of the walls, catenary action in the floor panels and hanging action from the roof. The dynamic analysis did not show a collapse, unless the inter-compartment stiffness was significantly reduced. The resistance mechanisms are described in this paper, which may provide information for improved building design.
21 December 2024 in Mathematics and Mechanics of Solids
This paper gives a brief overview of the static and the dynamic analyses of sandwich beams and sandwich plates composed of two elastic layers connected by a soft core. We show the strict correspondence between the sandwich beam, sandwich plate, and the analogous composite beam and composite plate problem with partial interaction. The beam problem is governed by a sixth-order differential equation in space for the deflection, whereas the plate problem is governed by a tri-Laplacian equation for the deflection, as first shown by Hoff in 1950 for symmetrical three-layer component (sandwich plate or composite plate theory with partial interaction). It is shown herein that the tri-Laplacian partial differential equation is also valid for general unsymmetrical sandwich plate or partially composite plate. In the limit cases, i.e., for non-composite action and for full-composite action, the beam model reduces into the Euler–Bernoulli beam model and the plate model into the Kirchhoff–Love model. Boundary layer phenomena may be predominant in the asymptotic stiff problem. The nonlocal bending moment–curvature of the sandwich beam (or composite beam with partial interaction) is analysed, and extended to a nonlocal Marcus bending moment–curvature for the composite plate theory. The consistency of the tri-Laplacian plate theory is commented, regarding the bi-Laplacian Reissner sandwich plate theory, which neglects the bending stiffnesses of each face layer. The paper finally presents results for the static bending and vibrations of sandwich beams and plates on simply supported boundary conditions, with a discussion on asymptotic limit cases.
1 March 2019 in Frontiers of Architectural Research
This paper is devoted to the analytical and numerical modeling of the lateral-torsional stability of horizontally layered composite beams. Composite beams are classified as horizontally layered beams with interlayer slip or sandwich beams with a weak shear core. The governing differential equations of the out-of-plane behavior of horizontally layered composite beams are supported by variational arguments. In the theoretical analysis, a distinction is made between the influence of the shear connection at the interface with respect to the in-plane or transversal deformations and to the out-of-plane or lateral deformations, respectively. Some engineering results are presented for a partially composite beam under pure bending moment. In the case of noncomposite in-plane action (orthotropic connection), a simple closed-form solution is derived for the lateral-torsional buckling moment, and it is shown that the exact dimensionless buckling moment depends only on two structural parameters for beams compo...