We present a design of a pillared phononic crystal based structure for Love wave manipulation to achieve high mass sensitivity. The structure is made of phononic micro-pillars constructed by stacking tungsten and SiO2 layers, distributed on a substrate designed for Love wave propagation. The multilayered pillar allows the creation of bandgaps, which leads to the existence of resonant modes where the elastic energy is confined within the SiO2 free surface layer of the pillar. We study particularly a resonant mode where this layer exhibits torsional mechanical motion which can only be excited by shear horizontal surface waves. We show that Love wave interaction with the torsional mode gives rise to a sharp attenuation in the surface wave transmission spectrum with a high quality factor. We also study the variation of the mass sensitivity of the system by evaluating the resonant mode's frequency shift induced by a mass perturbation using two theoretical approaches: a perturbation theory based approximation and a numerical method. The system presents very promising mass sensitivity which provides an interesting approach to increase the detection performance of Love wave based bio-sensors.
We propose the design of a phononic crystal to sense the acoustic properties of a liquid that is constituted by an array of silicon ridges on a membrane. In contrast to other concepts, the ridges are immersed in the liquid. The introduction of a suitable cavity in the periodic array gives rise to a confined defect mode with high localization in the cavity region and strong solid–liquid interaction, which make it sensitive to the acoustic properties of the liquid. By using a finite element method simulation, we theoretically study the transmission and cavity excitation of an incident flexural wave of the membrane. The observation of the vibrations of this mode can be achieved either outside the area of the phononic crystal or just above the cavity. We discuss the existence of the resonant modes, as well as its quality factor and sensitivity to liquid properties as a function of the geometrical parameters. The performance of the proposed sensor has then been tested to detect the variation in NaI concentration in a NaI–water mixture.
Surface-acoustic-wave (SAW) sensors have undergone outstanding developments during the last decades. However, for biosensing applications, they struggle to compete with optical sensing technologies. In this work, we present a Love-wave-based sensing platform that leverages the use of the local resonances of micropillars fabricated on the surface of the guiding layer. We demonstrate numerically and experimentally that the Love-wave interaction with the micropillars produces sharp attenuation dips in the transmission spectrum. These dips are associated with the excitations of flexural and torsional resonance modes of the pillars. We utilize these modes to achieve higher detection sensitivity of temperature variation and mass loading using sugar and microbeads concentrations in aqueous solutions. Integrating a lattice of micropillars into SAW-based devices offers a strong potential for detecting low particles concentrations.
The development of applications based on metallic nano-objects requires an extensive knowledge of their vibrational properties. Its size, shape, materials, or even crystallinity have a strong influence on the vibrational frequencies of a nano-object. It is also known that the coupling with environment has a strong effect on the lifetime of its resonating modes. However, the impact of the contact between a nano-object and its substrate still requires further investigation. Here we report on the vibrational response of gold disks for different contact area with a silicon substrate. The investigation of the quality factor of the first thickness mode of the disks highlights an important energy transfer from the disks to the substrate. The impact of the size of the contact area on the frequencies of the radial eigenmodes is also reported both experimentally and numerically. Finally, it is shown that such objects can be excited by acoustic waves propagating from the substrate. These findings display the possibility to use nanodisks to develop acoustic microscopy at the nanoscale.
We present a finite element (FE) based model to accurately investigate the dispersion and attenuation of Love waves in a multilayered structure made of a piezoelectric substrate, a guiding layer, and a viscous fluid. The numerical model solves the general form of the wave equations that includes the materials anisotropy, piezoelectricity, and viscoelasticity. We express the wave equations for elastic waves in a particular formulation in order to solve an eigenvalue problem where the eigenvalue is the complex wavenumber k from which we can derive the phase velocity [ω/Re(k)] and the attenuation rate [Im(k)]. The numerical model enables us to study the effects of the interdigitated electrodes, the materials viscoelasticity and piezoelectricity, and the fluid's viscosity on the wave phase velocity and attenuation. Our FE based model will facilitate optimizing the design of anisotropic piezoelectric platforms for Love waves propagation under viscous fluid loading.
Microfabricated alkali vapor cells are key to enable miniature devices such as atomic clocks and optically pumped magnetometers with reduced size, weight, and power. Yet, more versatile fabrication methods are still needed to further expand their use cases. Here, we demonstrate an approach to collectively fill and seal microfabricated cesium cells using locally sealed microchannels patterned within one of the glass substrates comprising the cells. Unlike current methods that rely on wafer-level anodic bonding as the last sealing step, an approach based on local sealing opens the path to features so far limited to traditional glass-blown cells, including the ability to deposit temperature-sensitive antirelaxation coatings, reaching lower background gas pressure without an additional gettering material or filling with diverse atomic or molecular species.