Surface-acoustic-wave (SAW) sensors have undergone outstanding developments during the last decades. However, for biosensing applications, they struggle to compete with optical sensing technologies. In this work, we present a Love-wave-based sensing platform that leverages the use of the local resonances of micropillars fabricated on the surface of the guiding layer. We demonstrate numerically and experimentally that the Love-wave interaction with the micropillars produces sharp attenuation dips in the transmission spectrum. These dips are associated with the excitations of flexural and torsional resonance modes of the pillars. We utilize these modes to achieve higher detection sensitivity of temperature variation and mass loading using sugar and microbeads concentrations in aqueous solutions. Integrating a lattice of micropillars into SAW-based devices offers a strong potential for detecting low particles concentrations.
Love wave (L-SAW) sensors have been used to probe cell monolayers, but their application to detect changes beyond the focal adhesion points on cell monolayers, as viscosity changes on the cytoskeleton, has not been explored. In this work we present for the first time a Love wave sensor with tuned penetration depth and sensitivity to potentially detect mechanical changes beyond focal adhesion points of cell monolayers. We designed and fabricated a Love wave sensor operating at 30 MHz with sensitivity to detect viscous changes between 0.89 and 3.3 cP. The Love wave sensor was modeled using an acoustic transmission line model, whereas the response of interdigital transducers (IDTs) was modeled with the Campbell’s cross-field circuit model. Our design uses a substrate with a high electromechanical coupling coefficient (LiNbO3 36Y-X), and an 8-µm polymeric guiding layer (SU-8). The design aims to overcome the high insertion losses of viscous liquid environments, and the loss of sensitivity due to the low frequency. The fabricated sensor was tested in a fluidic chamber glued directly to the SU-8 guiding layer. Our experiments with liquids of viscosity similar to those expected in cell monolayers showed a measurable sensor response. In addition, experimentation with SaOs-2 cells within a culture medium showed measurable responses. These results can be of interest for the development of novel cell-based biosensors, and novel characterization tools for cell monolayers.
We present a finite element (FE) based model to accurately investigate the dispersion and attenuation of Love waves in a multilayered structure made of a piezoelectric substrate, a guiding layer, and a viscous fluid. The numerical model solves the general form of the wave equations that includes the materials anisotropy, piezoelectricity, and viscoelasticity. We express the wave equations for elastic waves in a particular formulation in order to solve an eigenvalue problem where the eigenvalue is the complex wavenumber k from which we can derive the phase velocity [ω/Re(k)] and the attenuation rate [Im(k)]. The numerical model enables us to study the effects of the interdigitated electrodes, the materials viscoelasticity and piezoelectricity, and the fluid's viscosity on the wave phase velocity and attenuation. Our FE based model will facilitate optimizing the design of anisotropic piezoelectric platforms for Love waves propagation under viscous fluid loading.
The present work deals with the development of a Love-wave biosensor for the diagnosis of the modification of cell viscosity. The relevant device performance such as insertion loss, attenuation, phase velocity, and sensitivity needs to be analysed as a function of the device structure and also regarding the effect of the liquid loading. In this study, we used an analytical model based on the equation of motions for a Love wave propagating in a three-layer structure. We show that the effect of the viscous coupling leads to insertion losses and a phase shift that impact the acoustic ratio. A comparison between experimental and theoretical results showed a good agreement between the behaviours as it was observed for the phase shift vs. the insertion loss with a limited difference in values (3.11/3.09—experimental/simulation for the sensitivity to the viscosity for different insertion losses) due to the assumptions made on the model used.
In this work we present the development of an integrated microfluidic platform addressing several challenges. The sensor array combines a dual Rayleigh wave and Love wave for the diagnosis of the modification of cell viscoelasticity. Based on simulations taking into equations of motion and Navier-Stokes equation for the viscous liquid region, we evaluate and correlate the Love surface acoustic wave sensing part in order to enhance the sensitivity. The results corroborate the idea that the whole measurement system must be considered to develop an integrated optimized analysis system.