The article presents the results of plastic shaping tests of AZ61 and WE43 alloys. There were both classic extrusion tests as well as extrusion tests of KOBO method. An assessment was made of the influence of extrusion process parameters on the mechanical properties and the structure of the alloys. On the basis of achieved results of mechanical properties for alloys AZ31 and WE43 the susceptibility of those alloys to plastic shaping was determined. Quantitative tests of structure assessment in case of alloys AZ61 and WE43 after extrusion with the use of KOBO method were conducted with the use of METILO program. It has been shown that extrusion AZ61, WE43 alloys method KOBO leads to considerable fragmentation of grains.
This article presents the influence of the applied extrusion method on the microstructure and mechanical properties of the WE43 magnesium alloy. The materials for tests were ingots made from magnesium alloy, with dimensions of 40 × 90 mm, marked with the symbol WE43. Two extrusion methods were used: the classic one—concurrent extrusion, and the complex one—concurrent extrusion with a reversible die (KoBo). As a result of the application of deformation processes, rods were obtained. The implemented deformation methods made it possible to determine the influence of the deformation process parameters on changes in the structure and properties of the WE43 alloy. In addition, compression tests were performed to determine the values of the yield stress and to analyze changes in the microstructure after plastic deformation. The hot plastic deformation activation energy and the process parameters, for which the course of plastic flow is affected by the presence of twins in the microstructure, were determined for the WE43 alloy. The effects of superplastic flow at 350 °C (250% elongation) and microstructure refinement (d = 1 µm) were demonstrated after applying the KoBo method. The results will be useful in the development of forming technology of selected construction elements, which serve as light substitutes for currently used materials.
20 March 2024 in Archives of Civil and Mechanical Engineering
The paper describes the results of structure and properties tests of flat bars made of alloy WE43 obtained in the process of extrusion with the use of KOBO method. An analysis of structure changes was conducted both in initial state and after plastic deformation. A quantitative analysis of the material was also conducted with the use of METILO program. The paper also presents results of mechanical tests marked in the uniaxial tensile testing in room temperature and in elevated temperature for achieved flat bars. Fractographic tests were conducted after tensile test in order to determine the mechanism of cracking.
28 December 2023 in Archives of Foundry Engineering