Ping Fu

Ping Fu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2022 in Processes
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
JWJunfei Wu
Junfei Wu
PFPing Fu
Ping Fu
ZQZhiping Qu
Zhiping Qu
WZWenjie Zhao
Wenjie Zhao
YSYixuan Song
Yixuan Song
In the surface filtration process with pores larger than the particle size, the formation of particle bridges plays a crucial role in the filter cake structure and the filtration efficiency throughout the filtration process. First, to understand the microscopic information required for the bridging mechanism, we use the two-way coupling of computational fluid dynamics (CFD)–discrete element method (DEM) to simulate the deposition characteristics of particles in the pores of ceramic membranes. Next, by dynamically observing the deposition morphology and bridging process of particles, the bridging mechanism was revealed at the level of a single hole. Then, we studied the influence of particle concentration and inlet velocity on the bridge erection process. The results show that the bridging function of particles runs through the clean filtration stage and the transition stage. Particle concentration and inlet flow rate have a crucial influence on the formation of particle bridges and filtration efficiency.

27 March 2023 in Membranes
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
XWXinyuanrui Wang
Xinyuanrui Wang
YWYongping Wu
Yongping Wu
SWSong Wang
Song Wang
JWJunfei Wu
Junfei Wu
YLYang Li
Yang Li
The discrete element method coupled with the computational fluid dynamic (CFD-DEM) method is effective for studying the micro-flow process of lignin particles in ceramic membranes. Lignin particles may exhibit various shapes in industry, so it is difficult to model their real shapes in CFD-DEM coupled solutions. Meanwhile, the solution of non-spherical particles requires a very small time-step, which significantly lowers the computational efficiency. Based on this, we proposed a method to simplify the shape of lignin particles into spheres. However, the rolling friction coefficient during the replacement was hard to be obtained. Therefore, the CFD-DEM method was employed to simulate the deposition of lignin particles on a ceramic membrane. Impacts of the rolling friction coefficient on the deposition morphology of the lignin particles were analyzed. The coordination number and porosity of the lignin particles after deposition were calculated, based on which the rolling friction coefficient was calibrated. The results indicated that the deposition morphology, coordination number, and porosity of the lignin particles can be significantly affected by the rolling friction coefficient and slightly influenced by that between the lignin particles and membranes. When the rolling friction coefficient among different particles increased from 0.1 to 3.0, the average coordination number decreased from 3.96 to 2.73, and the porosity increased from 0.65 to 0.73. Besides, when the rolling friction coefficient among the lignin particles was set to 0.6–2.4, the spherical lignin particles could replace the non-spherical particles.

16 February 2022 in Energies
Verified
Journal Article
Open access
PDF file
MZMingsai Zhang
Mingsai Zhang
PFPing Fu
Ping Fu
JWJunfei Wu
Junfei Wu
HWHao Wang
Hao Wang
The study about the low-temperature performance of lithium-ion batteries (LIB) is of great significance at extreme temperatures, such as polar scientific research, space exploration, deep-sea exploration, military fields, and so on. In this study, normal devices and symmetrical devices were fabricated by ternary Li(Ni0.5Mn0.3Co0.2)O2 as cathode and graphite as anode at 25 and −20 °C. The results show that the specific discharge capacity of normal device is up to 120 mAh g−1 at 1 C and 25 °C. The specific capacity and energy density at 0.2 C and −20 °C are 106.05 mAh g−1 and 376.53 mWh g−1, respectively, which can reach 92.82% of that at 1 C and 25 °C. The value of activation energy Ea of the interface reaction of the LIB is calculated to be 63.72 kJ/mol by the Arrhenius equation. When the temperature dropped from 25 to −20 °C, the lattice spacing of Li1−x(Ni0.5Mn0.3Co0.2)O2 hardly changed, while the lattice spacing (002) of graphite reduces 0.00248 Å. In addition, some cracks were observed on the charged cathode at −20 °C. We carried out quasi-in situ electrochemical impedance spectroscopy (EIS) when the voltages of normal device discharged to 3.8, 3.6, 3.4, 3.2, and 3.0 V. Unlike the relationship of voltage–resistance at 25 °C, the values of the series resistance (Rs), charge transfer resistance (Rct), and ion transfer resistance (Rit) gradually decrease as the voltage decreases at −20 °C. Compared with the resistance of the symmetrical device based on the anode at 25 °C, the values of Rs and Rit at −20 °C both obviously increase. The main reason of performance degradation for normal device at −20 °C is large ion transfer resistance and the decrease of lattice spacing of the graphite (002).