Bao Jun Ge

Dr. Bao Jun Ge


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2022 in Machines
Verified
Journal Article
Open access
PDF file
HZHui Zhang
Hui Zhang
BGBao Jun Ge
Bao Jun Ge
BHbin han
bin han
Motor failure can result in damage to resources and property. Real-time motor fault diagnosis technology can detect faults and diagnosis in time to prevent serious consequences caused by the continued operation of the machine. Neural network models can easily and accurately fault diagnose from vibration signals. However, they cannot notice faults in time. In this study, a deep learning model based on a temporal convolutional network (TCN) and attention is proposed for real-time motor fault diagnosis. TCN can extract features from shorter vibration signal sequences to allow the system to detect and diagnose faults faster. In addition, attention allows the model to have higher diagnostic accuracy. The experiments demonstrate that the proposed model is able to detect faults in time when they occur and has an excellent diagnostic accuracy.

8 April 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Jichao HanJichao Han
Jichao Han
XBXizhao Bian
Xizhao Bian
DGDongxin Guo
Dongxin Guo
HQHaiming Qi
Haiming Qi
BGBao Jun Ge
Bao Jun Ge
The spoke-type interior permanent magnet synchronous motor (STIPMSM) is used in the drive systems of electric heavy-duty truck. The drive motors are prone to the overload operation when the electric heavy-duty truck climbs a slope or operates under the heavy load. The reliability of motor is a challenge. The sustained overload capacity is an important index of STIPMSM performance. An improved multi-objective nonlinear coupled iterative calculation method for STIPMSM is proposed, which can accurately calculate the performance changes of STIPMSM under different overload conditions. The nonlinearity of the magnetic circuit and the influence of the external conditions on the material performance are considered in this method. A 650kW STIPMSM is studied. The multi-objective nonlinear coupled iterative calculation method is applied to calculate the different overload conditions. The final multi-objective convergence of physical quantities is achieved. The change of electromagnetic field and harmonics is analyzed under different load rates. A method based on nonlinear fitting for maximum sustained overload (MSO) prediction of STIPMSM is proposed. The predicted MSO operating conditions are calculated. The calculated results are agreement with the predicted results. Experiments are conducted on the STIPMSM prototype under different operating conditions. The accuracy of the calculation method is verified.

5 February 2016 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
JHJichao Han
Jichao Han
BGBao Jun Ge
Bao Jun Ge
DTdajun tao
dajun tao
WLWeili Li
Weili Li
In order to study the influence of the cooling fluid parameter on the fluid flow and end part temperature in the end region of the large turbogenerator, a 330-MW water-hydrogen-hydrogen cooled turbogenerator is analyzed. The fluid velocity and pressure values from the flow network calculations are applied to the end region as boundary conditions and the losses obtained from 3-D transient electromagnetic field calculations are applied to the end parts as heat sources in the fluid and thermal coupling analysis. After solving the fluid and thermal equations of fluid-solid conjugated heat transfer, the fluid velocity and end part temperature in the turbogenerator end region are gained under the different cooling fluid parameters. The influence of different fluid velocities and fluid temperatures in the water pipe inlet, and in the fan inlet on the fluid flow and end part temperature in the turbogenerator end region is researched. The calculation results of copper shield temperature are compared with the measured values. The calculation results coincident well with the measured values. These provide the important reference for better cooling turbogenerator end region.

17 September 2024 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Jichao HanJichao Han
Jichao Han
MTMingxuan Teng
Mingxuan Teng
YMYue Ma
Yue Ma
JQJiayu Qiu
Jiayu Qiu
BGBao Jun Ge
Bao Jun Ge
PZPing Zheng
Ping Zheng
The end leakage flux generated by the current in the end winding of the turbogenerator is large, which has a significant effect on the electromagnetic losses and temperature in the end region. As the capacity of the power and electromagnetic load increase, the end leakage flux increases obviously in the end of the generator. It results in the high eddy current losses in the components of the end region. The turbogenerator produces local overheating, local stress, and other problems in the end. In this paper, the mathematical model of the three-dimensional transient electromagnetic field in the end is developed for a 1407 MVA nuclear turbogenerator. The flux density distribution and losses of the end components under multi-layer magnetic screen structure are studied. A novel magnetic screen with circumferential ventilation duct (MSWCVD) is proposed. The flux density and losses of the end components are compared and analyzed under different depths and widths of circumferential ventilation duct of the multi-layer magnetic screen. The three-dimensional thermal model of the end region is proposed. The fluid-thermal coupling field of the end region of the turbogenerator is calculated and studied. The results are close to the measured values.

24 April 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
BGBao Jun Ge
Bao Jun Ge
XXXiao Xu
Xiao Xu
DTdajun tao
dajun tao
Jichao HanJichao Han
Jichao Han
LWLikun Wang
Likun Wang
The driving motor for the cooling medium in a high-temperature gas-cooled reactor is crucial for coolant circulation in the reactor. This study proposes a method for calculating the gas friction loss using Bernoulli's equation to study its effect on temperature rise in the motor. The ventilation network model of the motor was developed using the fluid network method, and a three-dimensional mathematical model of the stator was established by considering the relationships between fluid velocity, temperature, and gas friction loss. The results of the ventilation system calculations were applied to the physical model as boundary conditions, and the distribution of the stator temperature was determined using the finite volume method. The effect of the change in stator ventilation structure on the gas friction loss distribution was studied. The calculated friction losses agreed with the values obtained using the empirical formula for gas friction loss.

25 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
PHPeng Hou
Peng Hou
BGBao Jun Ge
Bao Jun Ge
DTDajun Tao
Dajun Tao
YWYue Wang
Yue Wang
BPBo Pan
Bo Pan
Addressing the problem of the vibration and noise of a permanent-magnet synchronous motor (PMSM), this paper optimizes the structure of a permanent-magnet motor rotator, introduces the electromagnetic-structure-acoustic coupling calculation model, and optimizes the motor rotator to reduce the vibration and noise of a permanent-magnet motor. Using the theory of Maxwell’s stress equation, the radial electromagnetic force on the stator teeth of the permanent-magnet motor is deduced and analyzed, and the correctness of the analysis calculation is verified by using the finite element multi-physical field coupling method. Based on the deduced analytical expression of the radial electromagnetic force, the sources of the radial electromagnetic force for each order and the frequency of the permanent-magnet motor are summarized. A 12-slot, 8-pole, permanent-magnet motor is taken as an example. A calculation model considering the spatial distribution of the radial electromagnetic force and the electromagnetic vibration of an iron-cobalt-based stator is established. The harmonic response of the electromagnetic vibration of the motor is analyzed, and a modal analysis is carried out. The optimized acceleration vibration noise cascade of the FeCo-based permanent-magnet drive motor under load is given. The correctness and validity of the theoretical derivation and simulation are verified by experiments.