Building Information Modelling (BIM) has been adopted as the main technology in the construction industry in many developed countries due to its notable advantages. However, its applications in developing countries are limited. This paper aims to investigate factors which impact on BIM adoption in the construction industry. Twelve external variables were identified by an integrated TAM (Technology Acceptance Model) and TOE (Technology Organization Environment) framework and a systematic review of past studies. A survey was conducted in development, construction, design and consulting companies to investigate the impacts of these 12 external variables on BIM adoption. Using the interval Decision Making Trial and Evaluation Laboratory (DEMATEL) method, retrieved 120 completed questionnaires were analysed. The “Requirements from national policies” was found to be the most significant driving variable of BIM adoption by investigated companies. A further simulation analysis revealed that the “Intention to Use” BIM varied significantly with the change of “Requirements from national policies”, “Standardization of BIM”, and “Popularity of BIM in the industry”. The results lead to the conclusion that government incentives play critical roles in BIM adoption in China. Policy makers could put more efforts into motivation strategies, standardization measures, and BIM culture cultivation to promote BIM applications in the construction industry.

Rwanda is an East African Community (EAC) nation with rapid and remarkable past development in different sectors and still with the ambitious targets and plans to be achieved in the coming years ahead. The government plans universal electricity access by 2024 with 52% grid connection and 48% off-grid connections. In the transport sector, the concept of electric vehicles has been initiated and started in order to contribute to the UN Paris agreement and decrease the reliance of the transport sector on gaseous fuels which are one source of air pollutants leading to climate change, premature deaths, and morbidity associated with poor air quality. With higher electricity demand than the generation of the Rwandan power grid, different energy strategies are being developed with the overall objective to achieve the targeted universal energy access. In order to overcome the aforementioned issue, this paper proposes an integration of solar PV microgrids for the satisfaction of electric vehicle (EV) technology in Rwanda. Using HOMER Grid software, a managed EV charging station is simulated to a grid connected solar PV microgrid with storage in order to assess the economic impact. The results show that the proposed technology can lower the levelized cost (LCOE) of electricity by 139.7%. This study can contribute to further research developments in either different perspectives related to the integration of distributed energy resources (DERs) with electric vehicles or studies related to affordable and environment-energy systems.

Site investigation is essential for developing and constructing a dependable and effective wind engineering project. Also, the kinetic energy of moving air, used to drive a wind turbine, produces electricity. Having seen the shortage of previous studies on wind energy sites’ suitability across Africa and having read about the abundance of untapped wind energy resources in the East African region, this paper used Geographical Information System (GIS), multi-criteria, and Analytic Hierarchy techniques to provide a geospatial analysis of wind energy technology siting suitability in Eastern African Community Countries. Different data were acquired and processed from numerous open-access databases (Global Wind atlas, Regional Center for Mapping of Resources for Development (RCMRD), African Geoportal, East African community website, and Energy data Info.org). The results reveal Kenya has large parts of its land areas highly appropriate for wind energy siting (15.26%) and 1.55% of its land classified as unsuitable for wind energy generation. The rates of suitability and unsuitability were respectively 26.57% and 4.87% for Burundi, 20.6% and 10.21% for Rwanda, 20.39% and 10.44% for Tanzania, and 4.65% and 27.15% for South Sudan. The findings also show that East Africa exhibits moderate levels of wind energy siting suitability, with an estimated average of around 37.27% of its land area moderately suitable for wind energy technology installation, covering thousands of square kilometers. The study is advantageous to academia and industry-related personnel engaged in renewable energy-related activities in other African countries with similar topographies.

Pareidolia is a kind of misperception caused by meaningless, ambiguous stimuli perceived with meaning. Pareidolia in a built environment may trigger the emotions of residents, and the most frequently observed pareidolian images are human faces. Through a pilot experiment and an in-depth questionnaire survey, this research aims to compare built environmental pareidolian phenomena at different time points (6 a.m., 12 p.m., 2 a.m.) and to determine people’s sensitivity and reactions towards pareidolia in the built environment. Our findings indicate that the differences in stress level do not influence the sensitivity and reactions towards pareidolia in the built environment; however, age does, and the age of 40 seems to be a watershed. Females are more likely to identify pareidolian faces than males. Smokers, topers, and long-term medicine users are more sensitive to pareidolian images in the built environment. An unexpected finding is that most pareidolian images in built environments are much more easily detected in the early morning and at midnight but remain much less able to be perceived at midday. The results help architects better understand people’s reactions to pareidolia in the built environment, thus allowing them to decide whether to incorporate it appropriately or avoid it consciously in building design.

This research investigates building energy consumption in the Fujian region of China, characterized by warm winters and hot summers. The study focuses on window configurations and their impact on heat exchange and solar gain management. Initially examining three aluminum alloy window frames, the study utilizes the Multi-Quality Metric Calculator (MQMC) software V1 to assess the benefits of filled insulating glass. The reference values for the heat transfer coefficient, visible transmittance, and sun shading coefficient are established. Subsequently, Ecotect software V5.6 is employed to conduct a comprehensive year-round energy consumption simulation analysis, identifying an optimal window layout tailored to Fujian’s climate. In the Fuzhou simulation, aluminum–plastic co-extruded windows exhibit the lowest cooling energy consumption, while aluminum alloy windows have the highest. Summer cooling energy consumption, comprising about 75% of the total annual energy usage in hot summer and warm winter regions, significantly influences overall energy consumption. Windows made of aluminum–plastic co-extruded material with superior thermal insulation qualities can greatly reduce building energy consumption. The results contribute valuable insights to sustainable building practices and energy-conscious designs in regions characterized by warm winters and hot summers.

The significance of innovation management in triggering and sustaining increase in corporations of distinct size, age or enterprise type, is receiving growing attention, yet scant empirical research have been carried out in project-oriented service firms, in particular small-scaled enterprises. This study aims to identify how innovation management in small construction firms could enable them to pursue innovation and achieve greater business performance. Data collection comprises 157 empirical surveys leading to a conceptual framework modelled using the structural equation modelling approach. The findings show that entrepreneurship and networking have a direct and considerable influence on both technological and non-technological innovation, which consequently improves firm performance.