Zibin Huang

Dr. Zibin Huang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2022 in Processes
Verified
Journal Article
Open access
PDF file
YSYafei Song
Yafei Song
LZLi Zhe
Li Zhe
俏朱俏 朱
俏 朱
ZHZibin Huang
Zibin Huang
Zhenmin ChengZhenmin Cheng
Zhenmin Cheng
Supercritical water desalination (SCWD) shows great potential in the treatment of high-salt wastewater with zero liquid discharge. To investigate the salt precipitation behavior and mechanism in supercritical water, experiments and molecular dynamics simulations (MDs) were used to study the salting-out process of different salts in supercritical water. The equilibrium concentrations of NaCl, KCl, CaCl2, Na2SO4, and Na2CO3 in supercritical water were experimentally measured. When the temperature exceeded 693 K, the salt equilibrium concentration measured in the experiment was less than 130 mg/L. The solubility decreased in the order of KCl > NaCl > CaCl2 > Na2SO4 > Na2CO3. To elucidate the effects of different cations and anions in supercritical water on salt dissolution and precipitation behavior, the potential energy, radial distribution function (RDF) and coordination number in the system were obtained via molecular dynamics simulation. Experimental and MD results showed that salt solubility has significant positive correlation with systemic potential energy and hydration number. MD results indicated that a small ionic radius, large ionic charge, and low hydration coordination number are favorable for inorganic salts to precipitate and crystallize since these factors can strengthen the interaction between free ions and salt clusters. Moreover, due to the formation of multilayer coordination structure, polyatomic ions can achieve a lower equilibrium concentration than that of the corresponding monatomic ions.

21 February 2022 in Processes
Verified
Journal Article
Open access
PDF file
ZWZongliang Wang
Zongliang Wang
HGHongshan Guo
Hongshan Guo
TZTong Zhou
Tong Zhou
Zhenmin ChengZhenmin Cheng
Zhenmin Cheng
ZHZibin Huang
Zibin Huang
In a pilot-scale internal loop airlift reactor with a height of 5.5 m and a main column diameter of 0.484 m, the influence of three gas sparger structures (ladder distributor, tri-nozzle sparger and perforated plate) on the volumetric mass transfer coefficient kLa was investigated. It was found that the perforated plate produces the highest gas holdup difference and circulating liquid velocity between the riser and the downcomer. The perforated plate provides the most efficient mass transfer due to the more uniform gas distribution and higher circulating liquid velocity, followed by the ladder distributor and tri-nozzle spargers. Compared with the tri-nozzle sparger, the perforated plate increases the value of kLa by up to 16% at a superficial velocity of 0.15 m/s. Interestingly, the analysis of the liquid-phase mass transfer coefficient kL and specific area a with respect to gas velocity shows that the mass transfer rate is primarily controlled by a. By comparing the predictions of different mass transfer models, the slip velocity model based on penetration theory yields a satisfactory agreement with the experimental results within ±15% error. Meanwhile, empirical correlations regarding gas holdup and kLa were developed and were found to have good consistency with experimental values.

29 September 2023 in Processes
Verified
Journal Article
Open access
PDF file
ZWZongliang Wang
Zongliang Wang
Zhenmin ChengZhenmin Cheng
Zhenmin Cheng
PYPei-Qing Yuan
Pei-Qing Yuan
ZHZibin Huang
Zibin Huang
The hydrodynamic characteristics, mass transfer, and mixing performance of three different reactors, a bubble column reactor (BCR), a single-stage internal-loop airlift reactor (SSALR), and a four-stage internal-loop airlift reactor (FSALR), were investigated systematically through cold model experiments to explore the influence of draft tube configurations on the pilot-scale internal-loop airlift reactor (ILAR). The findings indicated that the BCR yielded a higher gas holdup and mass transfer coefficient due to its longer bubble residence time. Segmenting the draft tube improved the gas holdup in both the riser and downcomer, and the overall gas holdup in the downcomer increased by 9%. Compared with the SSALR, the mass transfer coefficient of the FSALR in the riser and downcomer increased by 10.2% and 9.3% on average, respectively. In addition, a higher liquid circulating velocity was obtained with the ILARs due to a higher gas holdup difference between the riser and the downcomer. Specifically, the liquid circulating velocity of the FSALR was 134.1% higher than that of the BCR and 15.8% higher than that of the SSALR. The mixing time of the ILARs was reduced due to more intense overall circulation. The mixing effect of the FSALR was the best. The mixing time was reduced by 70.2% and 51.3% compared with the BCR and SSALR for UG ranging from 4.0 cm/s to 9.1 cm/s, respectively. Empirical correlations were proposed for the gas holdup, liquid circulating velocity, mass transfer coefficient, and mixing time on the superficial gas velocity, and agreement with experimental data was satisfactory.

27 April 2024 in Processes
Verified
Journal Article
Open access
PDF file
YLYuhang Liu
Yuhang Liu
GGGao Gao
Gao Gao
ZHZibin Huang
Zibin Huang
HWHongfu Wang
Hongfu Wang
PYPei-Qing Yuan
Pei-Qing Yuan
YJYang Jingyi
Yang Jingyi
Electric desalination units in the crude oil refining process are becoming increasingly important with the growing trend towards heavy and poor crude oils. The oil–water mixing effect of the static mixer plays a crucial role in the electric desalination process. The present study investigated the effect of various variables, such as mixer type, number of mixing elements, washing water consumption, and oil viscosity and density on the oil–water mixing efficiency of a static mixer. In addition, this study also analyzed the effect of these variables on the salt washing process that occurs during mixing using a kinetic equation for the dissolution of inorganic salts. The results showed that the number of mixing elements was the most significant variable, followed by the amount of washing water injected. The density of the crude oil had a negligible effect. Based on these results, the use of four mixing elements in the SMX static mixer was recommended. The injection of washing water should be controlled at about 8%, while ensuring that the interfacial tension between oil and water remains below 0.01 N/m. Under these conditions, the salt washing efficiency reached 46.3%. This study provides a theoretical basis for designing static mixers and optimizing their operation in electric desalination processes.

5 May 2022 in Processes
Verified
Journal Article
Open access
PDF file
LDLei Ding
Lei Ding
LWLin Wang
Lin Wang
YJYang Jingyi
Yang Jingyi
PYPei-Qing Yuan
Pei-Qing Yuan
ZHZibin Huang
Zibin Huang
The performance of heavy oil visbreaking in supercritical cyclohexane (SCC6H12) was evaluated, followed by a comparison with its reaction in supercritical benzene (SCC6H6). The dealkylation-based viscosity reduction in the SCC6H12 was accelerated by improving the diffusivity, through which a product viscosity (80 °C) as low as 0.5 Pa.s was readily obtained by visbreaking at 380 °C for 5 min. A competition between dealkylation and condensation took place throughout the visbreaking process. As the reaction proceeded or the temperature increased, condensation played an increasingly dominant role in the visbreaking. Unlike the inert SCC6H6, the SCC6H12 participated in the visbreaking by saturating the alkyl carbon radicals essential for dealkylation and the aromatic carbon radicals essential for condensation. The viscosity reduction efficiency of the visbreaking in the SCC6H12 was initially suppressed by the H-donation of the solvent, but recovered rapidly due to the improved diffusion environment. Benefiting from the saturation of the aromatic carbon radicals, the asphaltene content of the product obtained in the SCC6H12 was lower than the corresponding value of the product obtained in the SCC6H6.

15 May 2025 in Processes
Verified
Journal Article
Open access
PDF file
GGGao Gao
Gao Gao
JLJiacheng Liu
Jiacheng Liu
YCYing Chen
Ying Chen
ZHZibin Huang
Zibin Huang
HWHongfu Wang
Hongfu Wang
YJYang Jingyi
Yang Jingyi
During crude oil exploration and extraction, the presence of H2S not only poses a threat to operational safety but also accelerates equipment corrosion, highlighting the urgent need for efficient and cost-effective processing solutions. This study employs a coupled numerical simulation approach that integrates computational fluid dynamics (CFD) and population balance models (PBM) to systematically investigate the multiphase flow characteristics within SK static mixers. By embedding mass transfer rates and reaction kinetics equations for hydrogen sulfide and sodium hypochlorite into the Euler-Euler multiphase flow model using user-defined functions (UDFs), the effects of equipment structure on the efficiency of the crude oil desulfurization process are examined. The results indicate that the optimized SK static mixer (with 15 elements, an aspect ratio of 1, and a twist angle of 90°) achieves an H2S removal efficiency of 72.02%, which is 18.84 times greater than that of conventional empty tube reactors. Additionally, the micro-mixing time is reduced to 0.001 s, and the coefficient of variation (CoV) decreases to 0.21, while maintaining acceptable pressure drop levels. Using the CFD-PBM model, the dispersion behavior of droplets within the static mixer is investigated. The results show that the diameter of the inlet pipe significantly affects droplet dispersion; smaller diameters (0.1 and 1 mm) enhance droplet breakup through increased shear force and turbulence effects. The findings of this study provide theoretical support for optimizing crude oil desulfurization processes and are of significant importance for enhancing the economic efficiency and safety of crude oil extraction operations.