Djahida Lerari

Dr. Djahida Lerari


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 December 2023 in Foods
Verified
Journal Article
Open access
PDF file
MOMalha Oudir
Malha Oudir
ZMZahra Ait mesbah
Zahra Ait mesbah
DLDjahida Lerari
Djahida Lerari
NINadia Issad
Nadia Issad
D. DjenaneD. Djenane
D. Djenane
Currently, food packaging is facing a critical transition period and a major challenge: it must preserve the food products’ quality and, at the same time, it must meet the current requirements of the circular economy and the fundamental principles of packaging materials eco-design. Our research presents the development of eco-friendly packaging films based on Opuntia ficus-indica cladodes (OFIC) as renewable resources. OFIC powder (OFICP)-agar, OFICP–agar-gum arabic (GA), and OFICP–agar-xanthan (XG) blend films were eco-friendlily prepared by a solution casting method. The films’ properties were investigated by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-RD), and differential scanning calorimeter (DSC). Water solubility and moisture content were also determined. Morphology, thickness, molecular interactions, miscibility, crystallinity, and thermal properties, were affected by adjusting the gums (GA and XG) content and glycerol in the blend films. Moisture content increased with increasing glycerol and XG content, and when 1.5 g of GA was added. Water solubility decreased when glycerol was added at 50% and increased with increasing GA and XG content. FTIR and XRD confirmed strong intermolecular interactions between the different blend film compounds, which were reflected in the shifting, appearance, and disappearance of FTIR bands and XRD peaks, indicating excellent miscibility. DSC results revealed a glass transition temperature (Tg) below room temperature for all prepared blend films, indicating that they are flexible and soft at room temperature. The results corroborated that the addition of glycerol at 30% and the GA to the OFICP increased the stability of the film, making it ideal for different food packaging applications.

3 March 2022 in Gels
Verified
Journal Article
Open access
PDF file
SHSalah Hamri
Salah Hamri
TBTewfik Bouchaour
Tewfik Bouchaour
DLDjahida Lerari
Djahida Lerari
ZBZohra Bouberka
Zohra Bouberka
PSPhilippe SUPIOT
Philippe SUPIOT
Ulrich MaschkeUlrich Maschke
Ulrich Maschke
The discharge of untreated wastewater, often contaminated by harmful substances, such as industrially used dyes, can provoke environmental and health risks. Among various techniques, the adsorption of dyes, using three-dimensional (3D) networks consisting of hydrophilic polymers (hydrogels), represents a low-cost, clean, and efficient remediation method. Three industrially used dyes, Methylene Blue, Eosin, and Rose Bengal, were selected as models of pollutants. Poly(acrylamide) (poly(AM)) and poly(acrylamide-co-acrylic acid) (poly(AM-co-AA)) networks were chosen as adsorbent materials (hydrogels). These polymers were synthesized by crosslinking the photopolymerization of their respective monomer(s) in an aqueous medium under exposure to UV light. Experimental adsorption measurements revealed substantially higher dye uptakes for poly(AM-co-AA) compared to poly(AM) hydrogels. In this report, a theoretical model based on docking simulations was applied to analyze the conformation of polymers and pollutants in order to investigate some aspects of the adsorption process. In particular, hydrogen and halogen interactions were studied. The presence of strong hydrogen bonding plays a crucial role in the retention of dyes, whereas halogen bonding has a small or negligible effect on adsorption. An evaluation of binding energies allowed us to obtain information about the degree of affinity between polymers and dyes. The number of rotatable bonds in the copolymer exceeds those of poly(AM),meaning that poly(AM-co-AA) is revealed to be more suitable for obtaining a high retention rate for pollutants.

23 April 2019 in International Journal of Plastics Technology
Verified
Journal Article
Closed access
PDF file
ZDZoulikha Djamaa
Zoulikha Djamaa
DLDjahida Lerari
Djahida Lerari
AMAbderrezak Mesli
Abderrezak Mesli
BKBachari Khaldoun
Bachari Khaldoun

24 November 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
MHManel Hallassi
Manel Hallassi
BRBENRABAA Rafik
BENRABAA Rafik
NCNawal Fodil Cherif
Nawal Fodil Cherif
DLDjahida Lerari
Djahida Lerari
RCRedouane Chebout
Redouane Chebout
ALAxel Lofberg
Axel Lofberg
Bimetallic layered double oxide (LDO) NiM (M = Cr, Fe) catalysts with nominal compositions of Ni/M = 2 or 3 were tailored from layered double hydroxides (LDH) using a coprecipitation method to investigate the effects of the trivalent metal (Cr or Fe) and the amount of Ni species on the structural, textural, reducibility, and catalytic properties for CH4/CO2 reforming. The solids before (LDH) and after (LDO) thermal treatment at 500 °C were characterized using TGA-TD-SM, HT-XRD, XRD, Raman, and IR-ATR spectroscopies; N2 physical adsorption; XPS; and H2-TPR. According to the XRD and Raman analysis, a hydrotalcite structure was present at room temperature and stable up to 250 °C. The interlayer space decreased when the temperature increased, with a lattice parameter and interlayer space of 3.018 Å and 7.017 Å, respectively. The solids fully decomposed into oxide after calcination at 500 °C. NiO and spinel phases (NiM2O4, M = Cr or Fe) were observed in the NiM (M = Cr, Fe) catalysts, and Cr2O3 was detected in the case of NiCr. The NiFe catalysts show low activity and selectivity for DRM in the temperature range explored. In contrast, the chromium compound demonstrated interesting CH4 and CO2 conversions and generally excellent H2 selectivity at low reaction temperatures. CH4 and CO2 conversions of 18–20% with H2/CO of approx. 0.7 could be reached at temperatures as low as 500 °C, but transient behavior and deactivation were observed at higher temperatures or long reaction times. The excellent activity observed during this transient sequence was attributed to the stabilization of the metallic Ni particles formed during the reduction of the NiO phase due to the presence of NiCr2O4, opening the path for the use of these materials in periodic or looping processes for methane reforming at low temperature.

9 February 2024 in Physica Scripta
Verified
Journal Article
Closed access
WFWissam Fortas
Wissam Fortas
Bouhadjar BOUKOUSSABouhadjar BOUKOUSSA
Bouhadjar BOUKOUSSA
MHMohammed Abdelkrim HASNAOUI
Mohammed Abdelkrim HASNAOUI
DLDjahida Lerari
Djahida Lerari
MSMohamed SASSI
Mohamed SASSI
BKBachari Khaldoun
Bachari Khaldoun
Known as green inorganic products and environmentally beneficial, ionic liquids (ILs) are increasingly used in the ionothermal synthesis of zeolites and zeotype materials compared to the hydrothermal method. This safe and successful process offers new opportunities to produce several molecular sieves with different morphologies and structures for promising applications. In this review, we summarize the history of the most successful phases of zeolites and zeotype materials, with different structures such as AEL, AEI, AFI, AST, ATS, CHA, -CLO, ITW, LEV, LTA, MFI, MTN, MTT, SOD, TON, IRR, and STW, from ILs discovery until 2022. The use of the ionothermal method compared to the hydrothermal route is evaluated and reported in this paper, besides synthesis parameters affecting the final product formation, such as IL dosage, cation size and shape, water content, (P, Si, F, IL/Al) ratios, crystallization time and temperature, mineralizing agent, Me/Al ratio, the addition of a secondary template (co-SDA), the use of IL as both SDA and solvent, competition in forming the framework, and the use of eutectic mixture and deep eutectic solvent (DES). Furthermore, we collected the various applications of these materials and highlighted the advantages of the ionothermal process, offering a comprehensive understanding of this topic.

1 October 2015 in Materials Research
Verified
Journal Article
Open access
PDF file
DLDjahida Lerari
Djahida Lerari
Radical-initiated copolymerization of Cinnamyl methacrylate (CMA) and Ethyl methacrylate (EMA) monomers were carried out at lower conversions (<10%) using 2,2’-azobisisobutyronitrile (AIBN) as initiator, in 1,4-dioxane at 60 °C and nitrogen atmosphere. Structure and composition of copolymers for wide range of monomer feed were determined by Fourier Transform Infrared (FTIR) and Ultra-violet (UV) spectroscopy analysis through recorded of analytical absorption bands for monomers units. Monomer reactivity for CMA (1)–EMA (2) pair were determined by the Finneman-Ross (F-R) and Kelen- Tudos (K-T) methods. They are r1= 0.135 and r2= 0.868 as determined by K-T method. Parameters Q1, e1 of CMA monomer were calculated according to Alfrey-Price model. A relatively high activity of EMA was observed as compared to CMA growing radical. This result can be explained by sterical hindrance caused by chemical structure of cinnamyl pendant group in chain growth reactions.