This paper describes the intercalation of ciprofloxacin (CIP), a bactericidal antibiotic, into the interlayer space of layered double hydroxides (LDHs). To counter the problem of bacterial resistance and also to improve the properties of the CIP drug, the drug carrier approach promises significant benefits. Through the tight control over the synthesis parameters, particularly the amounts of CIP with respect to aluminum ions, two different LDH-CIP-intercalated structures were obtained with significantly different interlayer distances, namely, 21 and 32 Å. The samples were fully characterized in terms of composition, structure, and morphology. Interestingly, the structure with the largest interlayer distance incorporated both CIP anions and Al(CIP)3 complex, exhibiting the possibility to increase the CIP drug loading beyond the anionic-exchange capacity of the LDH carrier. In vitro release in a simulated intestinal fluid (phosphate-buffered solution at pH 7.5) confirmed that LDH was a potentially efficient carrier to deliver CIP in a sustained manner via the anion-exchange mechanism. Different release rates were observed depending on the intercalated structure, which were also influenced by the morphological characteristics.
Bimetallic layered double oxide (LDO) NiM (M = Cr, Fe) catalysts with nominal compositions of Ni/M = 2 or 3 were tailored from layered double hydroxides (LDH) using a coprecipitation method to investigate the effects of the trivalent metal (Cr or Fe) and the amount of Ni species on the structural, textural, reducibility, and catalytic properties for CH4/CO2 reforming. The solids before (LDH) and after (LDO) thermal treatment at 500 °C were characterized using TGA-TD-SM, HT-XRD, XRD, Raman, and IR-ATR spectroscopies; N2 physical adsorption; XPS; and H2-TPR. According to the XRD and Raman analysis, a hydrotalcite structure was present at room temperature and stable up to 250 °C. The interlayer space decreased when the temperature increased, with a lattice parameter and interlayer space of 3.018 Å and 7.017 Å, respectively. The solids fully decomposed into oxide after calcination at 500 °C. NiO and spinel phases (NiM2O4, M = Cr or Fe) were observed in the NiM (M = Cr, Fe) catalysts, and Cr2O3 was detected in the case of NiCr. The NiFe catalysts show low activity and selectivity for DRM in the temperature range explored. In contrast, the chromium compound demonstrated interesting CH4 and CO2 conversions and generally excellent H2 selectivity at low reaction temperatures. CH4 and CO2 conversions of 18–20% with H2/CO of approx. 0.7 could be reached at temperatures as low as 500 °C, but transient behavior and deactivation were observed at higher temperatures or long reaction times. The excellent activity observed during this transient sequence was attributed to the stabilization of the metallic Ni particles formed during the reduction of the NiO phase due to the presence of NiCr2O4, opening the path for the use of these materials in periodic or looping processes for methane reforming at low temperature.