We report the fabrication of bio-based thermoplastic polyurethane (TPU) fibrous scaffolds containing essential oils (EO). The main goal of this study was to investigate the effects of essential oil type (St. John’s Wort oil (SJWO), lavender oil (LO), and virgin olive oil (OO))/concentration on the electrospinnability of TPU. The effects of applied voltage, flow rate, and end-tip distance on the diameter, morphology, and wettability of the TPU/EO electrospun fibers were investigated. The electrospun TPU/EO scaffolds were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle (CA), and Fourier transform infrared spectroscopy (FTIR). The addition of oil resulted in an increase in the fiber diameter, reduction in the surface roughness, and, accordingly, a reduction in the contact angle of the composite fibers. TPU fibers containing SJWO and LO have a more flexible structure compared to the fibers containing OO. This comparative study fills the existing information gap and shows the benefits of the fabrication of essential-oil-incorporated electrospun fiber with morphology and size range with respect to the desired applications, which are mostly wound dressing and food packaging.
Polymeric electrospun fibers present well-design scaffolds for wound healing applications. Here, the fabrication of biobased polyurethane (PU) blend fibers containing curcumin (Cur) was reported. Not only polymer concentration but also curcumin concentration affects the morphology, diameter, and contact angle values of the fibers. Morphological investigations revealed that the diameter and hydrophilicity of the PU fibers increased upon addition of curcumin. Effect of process parameters (applied voltage, flow rate, and tip-to-collector distance) on the average diameter and the hydrophilicity of the PU and PU/Cur fibers were examined. Optimum conditions to obtain uniform and bead-free PU/Cur fibers were determined as 12.5 kV, 1 mL/h, and 17 cm. This study demonstrates that the electrospinning process provides a simple way of obtaining bioactive agent loaded fibrous scaffolds, as well as contributing to a better understanding of the effect of process variables in the fabrication of PU/Cur blend fibers for wound healing applications.
13 May 2023 in Environmental Monitoring and Assessment
In recent years, heavy metals derived from several anthropogenic sources have both direct and indirect detrimental effects on the health of the environment and living organisms. Whole-cell bioreporters (WCBs) that can be used to monitor the levels of heavy metals in drinking and natural spring waters are important. In this study, whole-cell arsenic bacterial bioreporters were immobilized using polycaprolactone (PCL) electrospun fibers as the support material. The aim is to determine the properties of this immobilized bioreporter system by evaluating its performance in arsenic detection. Within the scope of the study, different growth media and fiber immobilization times were tested to determine the parameters affecting the fluorescent signals emitted by the immobilized bioreporter system in the presence of two dominant forms of arsenic, namely arsenite (As(III)) and arsenate (As(V)). In addition, the sensitivity, selectivity, response time, and shelf-life of the developed bioreporter system were evaluated. As far as the literature is concerned, this is the first study to investigate the potential of using PCL-electrospun fiber-immobilized fluorescent bacterial bioreporter for arsenic detection. This study will open new avenues in environmental arsenic monitoring.