Problems about hardened steels grinding is presently very important part of engineering. Many applications of these materials using in practice, machine, devices and in different industry like automotive, aviation, cosmonautics and in area of ...
The traditional approach to grinding is to operate within the limits of surface quality. The requirements for surface quality in grinding are higher than those in other common machining operations such as turning and milling. The surface quali...
The article deals with the automation of the grinding machine duty cycle. There are both described, the problems of the automation of the duty cycle and the present state summarised in this paper. The control systems of grinding cycle run from...
1 January 2015 in Advances in Science and Technology Research Journal
Selective Laser Sintering (SLS) or sintering of polymer powders is one of the most well-known additive technologies for printing 3D components. The properties of individual polymer powder materials have a significant impact on the quality of the manufactured part. Potential deformation and shrinkage can occur during printing if a significant number of parts are piled on top of one another or are oriented incorrectly, accumulating thermal energy in certain areas. The aforementioned research focuses on an experimental study to investigate the impact of the distribution and orientation of printing samples in the build chamber on the accuracy of dimensions and the surface roughness of PA12 prints. The aim of the study was to examine the impact of model settings during production as well as the effect of individual factors on the properties of manufactured parts, with a focus on ensuring that heat rises evenly from each print without accumulating.
Grinding is currently still an important method for surface finishing. At FPTM JEPU is realized the research, which deals with this issue. There are carried out experiments with grinding various materials under different conditions and then ar...