Selective Laser Sintering (SLS) or sintering of polymer powders is one of the most well-known additive technologies for printing 3D components. The properties of individual polymer powder materials have a significant impact on the quality of the manufactured part. Potential deformation and shrinkage can occur during printing if a significant number of parts are piled on top of one another or are oriented incorrectly, accumulating thermal energy in certain areas. The aforementioned research focuses on an experimental study to investigate the impact of the distribution and orientation of printing samples in the build chamber on the accuracy of dimensions and the surface roughness of PA12 prints. The aim of the study was to examine the impact of model settings during production as well as the effect of individual factors on the properties of manufactured parts, with a focus on ensuring that heat rises evenly from each print without accumulating.

The presented article focuses on the analysis of the components manufactured by different additive technologies and their reverse digitization. Sintered components were manufactured by Selective Laser Melting (SLM) and Atomic Diffusion Additive Manufacturing (ADAM) technologies. ADAM can be classified as indirect additive production using fibre of metal powder bound in a plastic matrix. SLM method works on the basis of selective bonding of metal powder using the thermal energy of the laser beam. The components were manufactured from anti-corrosion materials 17-4 PH and 316L-0407. In the experiment, parameters such as dimensional and shape accuracy were verified using laser scanning. Next, the roughness of the printed surfaces was measured on an Alicona Infinite Focus 5G optical measuring device. The dimensional accuracy of the ADAM process was evaluated using ISO IT grades. The accuracy of ADAM technology achieves the IT13 grade that is comparable to that of traditional processes for the production of semi-finished metal parts.

Binderjetting technology works on the principle of line injection moulding, using metal powder and liquid binder as input material, which is uniformly applied by print heads to the previous layer using a nozzle. By successively applying each l...

Additive technologies have been widely adopted in various industries. The choice of additive technology and material directly affects the functionality of the manufactured components. The development of materials with better mechanical properties has led to a growing interest in replacing traditional metal components with those manufactured using additive technologies. The application of Onyx as a material comes into consideration, which contains short carbon fibers to increase the mechanical properties. This study aims to experimentally verify the viability of substituting metal gripping elements with nylon and composite materials. The design of the jaws was customized to meet the requirements of a three-jaw chuck of a CNC machining center. The evaluation process involved monitoring the functionality and deformation effects on the clamped PTFE polymer material. When the metal jaws were applied, significant deformation of the clamped material occurred, which varied with the clamping pressure. This deformation was evidenced by the formation of spreading cracks on the clamped material and permanent shape changes in the tested material. Conversely, nylon and composite jaws manufactured using additive technology demonstrated functionality across all tested clamping pressures, without causing permanent deformation of the clamped material, unlike the traditional metal jaws. The results of this study confirm the applicability of the Onyx material and provide practical evidence of the potential for reducing deformation caused by clamping mechanisms.

Casting with a disposable pattern is a method employed to produce intricate-shaped castings. This manufacturing technique falls into the near-net shape methods category, which ensures that the resulting castings closely resemble the final components. Its primary application lies in industries where precision and complex castings are of paramount importance. Typically, castings manufactured using this method utilize higher-cost materials. The focus of this study centres on the utilization of reverse engineering in the production, modification, and inspection of wax injection moulds during the casting process. Within the scope of this investigation, a non-contact method employing the Kreon arm with the Aqulion scanner was implemented. This method facilitated the generation of a digital scan, serving as the foundation for designing and validating the mould for subsequent practical application.

The research deals with innovative technologies and an additive process based on metals in mechanical engineering. Two methods of additive production were appli