Xin Pei

Mr. Xin Pei


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YLYaoming Li
Yaoming Li
XPXin Pei
Xin Pei
HZHuang Zhang
Huang Zhang
MYMeini Yuan
Meini Yuan
In this study, the interactions of magnesium (Mg) atom and Mg(001) surface with different metal-atom-doped graphene were investigated using a density functional theory (DFT) method. For the interactions of magnesium with Al-, Mn-, Zn-, and Zr-doped and intrinsic graphene, it was found that the magnesium atoms were physisorbed into the hollow sites of the intrinsic graphene with only the smallest interaction energy (approximately −1.900 eV). However, the magnesium atoms tended to be chemisorbed on the doped graphene, which exhibited larger interaction energies and charge transfers. Additionally, the Zn-doped graphene displayed the largest interaction energy with the Mg atom (approximately −3.833 eV). For the interactions of Mg(001) with Al-, Mn-, Zn-, and Zr-doped and intrinsic graphene (intrinsic and doped graphene/Mg interface), doped atoms interacted with a Mg layer to make graphene wrinkle, resulting in a higher specific surface area and better stability. Mg–C chemical bonds were formed at the Al-, Zn-, and Zr-doped interface, and Mg–Mn chemical bonds were formed at the Mn-doped interface. This study provided the fundamental research for future research into doped atoms on graphene reinforced magnesium matrix composites.

27 March 2024 in Metals
Verified
Journal Article
Open access
PDF file
JZJiawei Zhu
Jiawei Zhu
MYMeini Yuan
Meini Yuan
XPXin Pei
Xin Pei
XZXiaosheng Zhou
Xiaosheng Zhou
MLMaohua Li
Maohua Li
A new type of multiphase nanoparticle-reinforced TiAl matrix composites ((Ti2AlC + Al2O3)p/TiAl composites) was successfully prepared by vacuum hot-pressing sintering using Ti powder and Al powder, which were ball-milled with different contents of stearic acid (CH3(CH2)16COOH). The component, microstructure, reaction mechanism, and mechanical properties were studied. The results indicated that the composites prepared by adding stearic acid as a process control agent during the ball-milling process not only contained γ-TiAl and α2-Ti3Al phases but also Ti2AlC and Al2O3 phases. The results of SEM and TEM showed that the composites were composed of equiaxed TiAl and Ti3Al grains, and the Ti2AlC and Al2O3 particles were mainly distributed along the TiAl grain boundary in chain form, which can effectively reduce the TiAl grain size. Through the room-temperature compression test, the maximum compression stress was significantly improved in those composites that added the stearic acid, due to the reinforcement particles. The maximum compression stress was 1590 MPa with a 24.3% fracture strain. In addition, the generated crack deflection and Ti2AlC and Al2O3 particles could also enhance the toughness of the TiAl alloy. (Ti2AlC + Al2O3)p/TiAl composites generated by adding stearic acid played a key role in improving the mechanical properties of the TiAl matrix.

17 April 2025 in Materials
Verified
Journal Article
Open access
PDF file
YWYang Wang
Yang Wang
MYMeini Yuan
Meini Yuan
PZPengfei Zhou
Pengfei Zhou
XPXin Pei
Xin Pei
WYWei Yang
Wei Yang
ZTZehui Tian
Zehui Tian
Ti-Al3Ti metal–intermetallic laminate (MIL) composites with microscale layer thickness have attracted attention in aerospace applications. However, whether millimeter-thick Ti layers can enhance the anti-penetration of Ti-Al3Ti MIL composites under 400–1000 m/s impact velocities remains unclear. In this study, a Ti-Al3Ti MIL composite target was prepared by hot press sintering, and the 2D finite element model validated by anti-penetration testing was used to prove that increasing the thickness of the Ti layer significantly increases the stress level and anti-penetration limit of the target. Simulations show that compared with a 0.1 mm Ti layer, a 2.5 mm Ti layer reduces the projectile residual velocity by 100% (600 m/s), 72% (800 m/s), and 38.5% (1000 m/s). With a total thickness difference of 0.1 mm, the crack propagation angles increase by 4° (0.06 mm Ti) and 14° (2.5 mm Ti) compared to a 0.4 mm Ti layer. By analyzing stress wave propagation and energy absorption during penetration, this work reveals that millimeter-thick Ti layers improve anti-penetration performance by controlling heterogeneous interface failure and the crack propagation direction through increased ductile layer thickness. These findings provide data for MIL composites and offer potential cost reductions for high-performance anti-penetration materials.