Cellular materials, such as aluminum foams, have proven to be excellent energy absorbents. They can be used as crushable core in sacrificial cladding (SC) for blast load mitigation. In this study, the blast absorption capacity of a brittle mineral foam-based SC is investigated through finite element modeling using the LS-DYNA software. The experimental set-up used consists of a rigid steel frame with a square cavity of 300 mm x 300 mm in the center The structure to be protected is simulated by a thin aluminum plate clamped into the rigid steel frame. The blast load is generated by 20 g of C4 high explosive set at a distance of 250 mm from the center of the plate. The blast absorption capacity of the considered SC is evaluated by comparing the maximum out-of-plane displacement of the center of the plate with and without the protective brittle mineral foam. The presence of the brittle mineral foam reduces the maximum out-of-plane displacement of the center of the plate at least by a factor of two. The brittle mineral foam is modeled both in solid elements and smoothed-particle hydrodynamics (SPH) by using Fu Chang's constitutive material law based exclusively on the results of quasi-static compression tests of the foam and a phenomenological relationship between stress, strain and strain rate. The SPH model predicts the maximum out-of-plane displacement of the center of the aluminum plate with an average relative error of 5% with respect to the experimental values.
Reinforced concrete (RC) columns, being axial-bearing components in buildings, are susceptible to damage and failure when subjected to blast loading. The failure of these columns can trigger a progressive collapse in targeted buildings. The primary objective of this study is to investigate the failure characteristics of laboratory-scale RC columns subjected to localized blast loading. The columns, with a length of 1500 mm and an outer diameter of 100 mm, are reinforced with 6 mm diameter longitudinal bars and 2 mm diameter steel ties. The blast loading is generated using an explosive-driven shock tube (EDST) positioned in front of the mid-span of the RC columns with a 30 g and 50 g charge. To capture the global response of the RC columns, high-speed stereoscopic DIC is used in addition to LVDTs. Furthermore, an FE model is developed using LS-DYNA R10.0 and validated against the experimental data. The results show that the proposed FE approach is able to reproduce the applied blast loading and the failure characteristics of the columns. The relative difference in column mid-span out-of-plane displacement between the FE model and the average measured data lies below 5%. Finally, the gray correlation method is conducted to assess the influence of various parameters on the blast resistance of the RC columns.
This paper presents a study on the dynamic behavior of thin aluminum plates subjected to consecutive fragment impact and blast loading. To this end, two separate experimental setups are used. In the first setup, 2 mm thick aluminum plates --- were subjected to the ballistic impact of fragment-simulating projectiles (FSPs). Experiments were carried out for FSP calibers of 7.62 mm and 12.7 mm considering both single impact and triple impacts with variations in the spacing of the impact locations. The out-of-plane displacement and in-plane strain fields were measured using digital image correlation (DIC) coupled to a pair of high-speed cameras in a stereoscopic setup. In the second setup, a subsequent blast loading was applied to the perforated plates using an explosive-driven shock tube (EDST). After the plates are perforated, the strain field around the holes depended on the caliber, the impact orientation of the FSP, and the distance between the impact locations. When the blast loading was applied, cracks tended to appear in areas of strain concentration between the perforated holes. It was found that the relative distance between the holes significantly influences the target’s response mode.
Cellular materials such as aluminum and polyurethane foams are recognized for their effectiveness in energy absorption. They commonly serve as crushable cores in sacrificial cladding for blast mitigation purposes. This study delves into the effectiveness of autoclaved aerated concrete (AAC), a lightweight, porous material known for its energy-absorbing properties as a crushable core in sacrificial cladding. The experimental set-up features a rigid frame made of steel measuring 1000 × 1000 × 15 mm3 with a central square opening (300 × 300 mm2) holding a 2 mm thick aluminum plate representing the structure. The dynamic response of the aluminum plate is captured using two high-speed cameras arranged in a stereoscopic configuration. Three-dimensional digital image correlation is used to compute the transient deformation fields. Blast loading is achieved by detonating 20 g of C4 explosive set at 250 mm from the plate’s center. The study assesses the mineral foam’s absorption capacity by comparing out-of-plane displacement and mean permanent deformation of the aluminum plate with and without the protective solution. Six foam configurations (A to F) are tested experimentally and numerically, varying in the foam’s free space for expansion relative to its total volume. Results show positive protective effects, with configuration F reducing maximum deflection by at least 30% and configuration C by up to 70%. Foam configuration influences energy dissipation, with an optimal lateral surface-to-volume ratio (ζ) enhancing protective effects, although excessive ζ leads to non-uniform foam crushing. To address the influence of front skin deformability, a non-deformable front skin has been adopted. The latter demonstrates an increased effectiveness of the sacrificial cladding, particularly for ζ values above the optimal value obtained when using a deformable front skin. Notably, using a non-deformable front skin increases maximum deflection reduction and foam energy absorption by up to approximately 30%.
Los materiales celulares, como la espuma de aluminio, han demostrado ser eficaces como absorbentes de energía. En este artículo se presenta la respuesta frente a una explosión de un revestimiento de protección frágil a base de espuma mineral. El montaje experimental utilizado consiste en un marco de acero rígido (1000 mm × 1000 mm × 15 mm) con una cavidad cuadrada de 300 mm x 300 mm en el centro. Una placa de aluminio, que representa la estructura, con una superficie total de 400 mm × 400 mm y un espesor de 2 mm se sujeta al marco de acero. Se utilizan dos cámaras de alta velocidad sincronizadas en una configuración estereoscópica para capturar la respuesta dinámica de la placa de aluminio a una velocidad de 20000 fotogramas por segundo. Los campos de deformación transitoria se calculan utilizando una técnica de correlación de imagen digital tridimensional. La carga de la explosión se obtiene detonando 20 g de C4 colocado a una distancia de 250 mm del centro de la placa de aluminio ensayada. La capacidad de absorción de la espuma mineral frágil se evalúa comparando el desplazamiento fuera del plano, la velocidad, la aceleración y la deformación principal mayor de la placa de aluminio delgada con y sin la espuma mineral protectora. Se consideran dos configuraciones de espuma con diferentes espesores: 60 mm y 120 mm. Se demuestra que la adición de espuma mineral frágil reduce el desplazamiento fuera del plano, junto con la velocidad de desplazamiento y la aceleración de la placa de aluminio, al menos en un factor de dos. El análisis post-mortem de las espumas muestra que la mitigación de la carga de la explosión en el montaje considerado y bajo la carga considerada se consigue parcialmente mediante el aplastamiento de las paredes celulares, pero sobre todo mediante el crecimiento de fisuras en la muestra.