oussama atoui

Mr. oussama atoui

Vrije Universiteit Brussel, Brussels, Brussels-Capital Region, Belgium
+6
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2021 in Composite Structures
Verified
Journal Article
Closed access
AMAzer Maazoun
Azer Maazoun
SMStijn Matthys
Stijn Matthys
BBBachir Belkassem
Bachir Belkassem
oussama atouioussama atoui
oussama atoui
DLDavid Lecompte
David Lecompte

6 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
oussama atouioussama atoui
oussama atoui
GKGeorgios Kechagiadakis
Georgios Kechagiadakis
AMAbdelhafidh Moumen
Abdelhafidh Moumen
AMAzer MAAZOUN
Azer MAAZOUN
BBBachir Belkassem
Bachir Belkassem
DLDavid Lecompte
David Lecompte
This work is a part of a larger research effort to better understand the combined effect of the blast wave and fragment impacts following the detonation of a shrapnel bomb. It is known that the time interval Δt, which represents the difference in arrival time between the blast wave front and the fragment at the position of a given target object, has a significant influence on its response mode. This paper presents insights into the establishment of a laboratory scale technique to generate a combined blast loading and single or multiple projectile impacts on a target. The objective of the setup is to control the time interval Δt to a certain extent so that the different response modes of the tested structures can be investigated. In order to reduce the complexity associated with the random nature of the shrapnel, steel ball bearings are used to simulate the projected fragments. They are embedded in a solid explosive charge, which is detonated at the entrance of an explosive driven shock tube. The experimental work demonstrates that it is possible to orient the path of a single projectile inside the tube when aiming at a target positioned at its exit. The setup guarantees the generation of a well-controlled planar blast wave characterized by its peak pressure, impulse and blast wave arrival time at the exit of the tube. The influence of the mass of the charge and the diameter of the projectile on its velocity study shows that for the same charge mass, the time interval increases with increasing projectile diameter. The experiments are numerically simulated based on an Eulerian approach using the LS-DYNA finite element software. The computational model allows to reveal details about the projectile flight characteristics inside the tube. Both the experimental and numerical data show the influence of the charge and projectile parameters on the time interval.

1 February 2022 in Engineering Structures
Verified
Journal Article
Closed access
AMAzer Maazoun
Azer Maazoun
SMStijn Matthys
Stijn Matthys
oussama atouioussama atoui
oussama atoui
BBBachir Belkassem
Bachir Belkassem
DLDavid Lecompte
David Lecompte

14 August 2023 in Mechanics & Industry
Verified
Journal Article
Open access
PDF file
AKAldjabar AMINOU MALAM KAILOU
Aldjabar AMINOU MALAM KAILOU
BBBachir Belkassem
Bachir Belkassem
oussama atouioussama atoui
oussama atoui
LPLincy Pyl
Lincy Pyl
DLDavid Lecompte
David Lecompte
Cellular materials, such as aluminum foams, have proven to be excellent energy absorbents. They can be used as crushable core in sacrificial cladding (SC) for blast load mitigation. In this study, the blast absorption capacity of a brittle mineral foam-based SC is investigated through finite element modeling using the LS-DYNA software. The experimental set-up used consists of a rigid steel frame with a square cavity of 300 mm x 300 mm in the center The structure to be protected is simulated by a thin aluminum plate clamped into the rigid steel frame. The blast load is generated by 20 g of C4 high explosive set at a distance of 250 mm from the center of the plate. The blast absorption capacity of the considered SC is evaluated by comparing the maximum out-of-plane displacement of the center of the plate with and without the protective brittle mineral foam. The presence of the brittle mineral foam reduces the maximum out-of-plane displacement of the center of the plate at least by a factor of two. The brittle mineral foam is modeled both in solid elements and smoothed-particle hydrodynamics (SPH) by using Fu Chang's constitutive material law based exclusively on the results of quasi-static compression tests of the foam and a phenomenological relationship between stress, strain and strain rate. The SPH model predicts the maximum out-of-plane displacement of the center of the aluminum plate with an average relative error of 5% with respect to the experimental values.

14 February 2022 in Journal of Pressure Vessel Technology
Verified
Journal Article
Closed access
PDF file
MDMohamed Dhouibi
Mohamed Dhouibi
HOHamza Ousji
Hamza Ousji
oussama atouioussama atoui
oussama atoui
RNRachid Nassri
Rachid Nassri
MPMarc Pirlot
Marc Pirlot
Effects of erosion phenomenon on the performance of a given gun barrel have been analyzed throughout numerical and experimental studies. Mainly, qualitative observations were performed. Theoretical relations between the evolution of the inner barrel profile and the provided interior ballistics are limited. This article focuses on the development of a numerical model to predict the engraving resistance evolution in terms of the inner barrel profile in the different weapon's life stages. Four test barrels “12.7 × 99 mm NATO” with different chamber volumes were considered. First, a Coordinate Measuring Machine (CMM) with a contact scanning probe was used to measure the inner dimension of the guns. Second, piezoelectric sensors with a special Doppler radar were considered to measure the (i) pressure and (ii) the bullet velocity in the test weapons. Finally, based on the obtained experimental results, a finite element (FE) analysis using the commercial software LS-DYNA was developed and validated. The obtained numerical results were used as insights to quantify the relationship between the engraving resistance and the chamber volume of small caliber guns.

10 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
oussama atouioussama atoui
oussama atoui
AMAzer MAAZOUN
Azer MAAZOUN
AKAldjabar AMINOU MALAM KAILOU
Aldjabar AMINOU MALAM KAILOU
BBBachir Belkassem
Bachir Belkassem
LPLincy Pyl
Lincy Pyl
DLDavid Lecompte
David Lecompte
This paper presents a study on the dynamic behavior of thin aluminum plates subjected to consecutive fragment impact and blast loading. To this end, two separate experimental setups are used. In the first setup, 2 mm thick aluminum plates EN-AW-1050A-H24 were subjected to the ballistic impact of fragment-simulating projectiles (FSPs). Experiments were carried out for FSP calibers of 7.62 mm and 12.7 mm considering both single impact and triple impacts with variations in the spacing of the impact locations. The out-of-plane displacement and in-plane strain fields were measured using digital image correlation (DIC) coupled to a pair of high-speed cameras in a stereoscopic setup. In the second setup, a subsequent blast loading was applied to the perforated plates using an explosive-driven shock tube (EDST). After the plates are perforated, the strain field around the holes depended on the caliber, the impact orientation of the FSP, and the distance between the impact locations. When the blast loading was applied, cracks tended to appear in areas of strain concentration between the perforated holes. It was found that the relative distance between the holes significantly influences the target’s response mode.