David Lecompte

Prof. Dr. David Lecompte

orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
oussama atouioussama atoui
oussama atoui
GKGeorgios Kechagiadakis
Georgios Kechagiadakis
AMAbdelhafidh Moumen
Abdelhafidh Moumen
AMAzer MAAZOUN
Azer MAAZOUN
BBBachir Belkassem
Bachir Belkassem
DLDavid Lecompte
David Lecompte
This work is a part of a larger research effort to better understand the combined effect of the blast wave and fragment impacts following the detonation of a shrapnel bomb. It is known that the time interval Δt, which represents the difference in arrival time between the blast wave front and the fragment at the position of a given target object, has a significant influence on its response mode. This paper presents insights into the establishment of a laboratory scale technique to generate a combined blast loading and single or multiple projectile impacts on a target. The objective of the setup is to control the time interval Δt to a certain extent so that the different response modes of the tested structures can be investigated. In order to reduce the complexity associated with the random nature of the shrapnel, steel ball bearings are used to simulate the projected fragments. They are embedded in a solid explosive charge, which is detonated at the entrance of an explosive driven shock tube. The experimental work demonstrates that it is possible to orient the path of a single projectile inside the tube when aiming at a target positioned at its exit. The setup guarantees the generation of a well-controlled planar blast wave characterized by its peak pressure, impulse and blast wave arrival time at the exit of the tube. The influence of the mass of the charge and the diameter of the projectile on its velocity study shows that for the same charge mass, the time interval increases with increasing projectile diameter. The experiments are numerically simulated based on an Eulerian approach using the LS-DYNA finite element software. The computational model allows to reveal details about the projectile flight characteristics inside the tube. Both the experimental and numerical data show the influence of the charge and projectile parameters on the time interval.

27 March 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Mohamed Ben RhoumaMohamed Ben Rhouma
Mohamed Ben Rhouma
AMAzer MAAZOUN
Azer MAAZOUN
AKAldjabar AMINOU MALAM KAILOU
Aldjabar AMINOU MALAM KAILOU
BBBachir Belkassem
Bachir Belkassem
IVIgnaas Vandenbruwane
Ignaas Vandenbruwane
DLDavid Lecompte
David Lecompte
Reinforced concrete (RC) columns, being axial-bearing components in buildings, are susceptible to damage and failure when subjected to blast loading. The failure of these columns can trigger a progressive collapse in targeted buildings. The primary objective of this study is to investigate the failure characteristics of laboratory-scale RC columns subjected to localized blast loading. The columns, with a length of 1500 mm and an outer diameter of 100 mm, are reinforced with 6 mm diameter longitudinal bars and 2 mm diameter steel ties. The blast loading is generated using an explosive-driven shock tube (EDST) positioned in front of the mid-span of the RC columns with a 30 g and 50 g charge. To capture the global response of the RC columns, high-speed stereoscopic DIC is used in addition to LVDTs. Furthermore, an FE model is developed using LS-DYNA R10.0 and validated against the experimental data. The results show that the proposed FE approach is able to reproduce the applied blast loading and the failure characteristics of the columns. The relative difference in column mid-span out-of-plane displacement between the FE model and the average measured data lies below 5%. Finally, the gray correlation method is conducted to assess the influence of various parameters on the blast resistance of the RC columns.

10 June 2010 in EPJ Web of Conferences
Verified
Journal Article
Open access
PDF file
KSK. Spranghers
K. Spranghers
DKD. Kakogiannis
D. Kakogiannis
JNJ.M. Ndambi
J.M. Ndambi
DLDavid Lecompte
David Lecompte
HShugo sol
hugo sol

10 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
oussama atouioussama atoui
oussama atoui
AMAzer MAAZOUN
Azer MAAZOUN
AKAldjabar AMINOU MALAM KAILOU
Aldjabar AMINOU MALAM KAILOU
BBBachir Belkassem
Bachir Belkassem
LPLincy Pyl
Lincy Pyl
DLDavid Lecompte
David Lecompte
This paper presents a study on the dynamic behavior of thin aluminum plates subjected to consecutive fragment impact and blast loading. To this end, two separate experimental setups are used. In the first setup, 2 mm thick aluminum plates EN-AW-1050A-H24 were subjected to the ballistic impact of fragment-simulating projectiles (FSPs). Experiments were carried out for FSP calibers of 7.62 mm and 12.7 mm considering both single impact and triple impacts with variations in the spacing of the impact locations. The out-of-plane displacement and in-plane strain fields were measured using digital image correlation (DIC) coupled to a pair of high-speed cameras in a stereoscopic setup. In the second setup, a subsequent blast loading was applied to the perforated plates using an explosive-driven shock tube (EDST). After the plates are perforated, the strain field around the holes depended on the caliber, the impact orientation of the FSP, and the distance between the impact locations. When the blast loading was applied, cracks tended to appear in areas of strain concentration between the perforated holes. It was found that the relative distance between the holes significantly influences the target’s response mode.

21 March 2025 in Buildings
Verified
Journal Article
Open access
PDF file
Mohamed Ben RhoumaMohamed Ben Rhouma
Mohamed Ben Rhouma
AMAzer MAAZOUN
Azer MAAZOUN
AAAldjabar Aminou
Aldjabar Aminou
BBBachir Belkassem
Bachir Belkassem
TTTine Tysmans
Tine Tysmans
DLDavid Lecompte
David Lecompte
Reinforced concrete (RC) columns are structural components that carry loads and are vulnerable to damage and possible failure under blast loads. Understanding how damage accumulates and cracks propagate in these structural members is essential for improving their resilience and designing blast-resistant buildings. This study introduces an experimental approach to mitigate the fireball and fumes generated by an explosion, allowing for a more precise structural response assessment. With the help of high-speed cameras, this study experimentally investigates the real-time damage progression and crack formation in RC columns. To explore these failure mechanisms, laboratory-scale RC columns with a low reinforcement ratio are intentionally designed to experience significant damage, providing deeper insights into concrete-specific failure patterns. The tested columns are 1800 mm long and have a 100 mm diameter. Each specimen is reinforced with 3 mm longitudinal reinforcement bars and 2 mm transverse bars. An explosive driven shock tube (EDST) is used to apply blast loads, targeting the mid-height of the columns. High-speed digital image correlation (DIC) tracks the overall structural response. A numerical simulation is developed in LS-DYNA and compared with experimental data for validation. The findings demonstrate that the proposed FE model accurately simulates both the applied blast load and the resulting failure patterns. The difference between the mid-span lateral displacement predicted by the numerical simulation and the average experimental measurements remains within 15%.

11 June 2018 in Proceedings
Verified
Conference Paper
Open access
PDF file
AMAzer MAAZOUN
Azer MAAZOUN
Stijn MatthysStijn Matthys
Stijn Matthys
BBBachir Belkassem
Bachir Belkassem
DLDavid Lecompte
David Lecompte
JVJohn Vantomme
John Vantomme
The use of carbon fiber reinforced polymer (CFRP) as an externally bonded reinforcement (EBR) for the strengthening of reinforced concrete (RC) structures loaded by a blast wave is confirmed as an efficient solution. This observation is complementary to other advantages of CFRP such as high tensile strength, light weight and durability. This paper discusses the behavior of CFRP as EBR in the event that two successive independent blast loads are applied on the same target. The main problems are the lack of knowledge regarding the failure modes of the CFRP strips under high strain rate and the blast response of the retrofitted structures when total debonding of the CFRP strips occurs. Four simply supported slabs with different EBR but with the same bond contact surface are tested using an explosive driven shock tube (EDST) to generate the blast wave. Digital image correlation (DIC) is used to measure the strain evolution in the concrete and the CFRP strips during the first explosion. The results show that for the first explosion, EBR increases the flexural strength and stiffness of the RC slabs. In the second explosion, total debonding of the CFRP strips occurs which initiates from the midspan of the slabs towards the supports. When the total debonding of the CFRP strips occurs, the strain distribution in the steel rebars are the same for all slabs regardless of the quantity of applied EBR.