Remote sensing techniques, developed over the past four decades, have enabled large-scale forest inventory. Light Detection and Ranging (LiDAR), as an active remote sensing technology, allows for the acquisition of three-dimensional point clouds of scanned areas, as well as a range of features allowing for increased performance of object extraction and classification approaches. As many publications have shown, multiple LiDAR-derived metrics, with the assistance of classification algorithms, contribute to the high accuracy of tree species discrimination based on data obtained by laser scanning. The aim of this article is to review studies in the species classification literature which used data collected by Airborne Laser Scanning. We analyzed these studies to figure out the most efficient group of LiDAR-derived features in species discrimination. We also identified the most powerful classification algorithm, which maximizes the advantages of the derived metrics to increase species discrimination performance. We conclude that features extracted from full-waveform data lead to the highest overall accuracy. Radiometric features with height information are also promising, generating high species classification accuracies. Using random forest and support vector machine as classifiers gave the best species discrimination results in the reviewed publications.

Detection of bio-deterioration and moisture is one of the most important tasks for comprehensive diagnostic measurements of buildings and structures. Any undesirable change in the material properties caused by the action of biological agents contributes to gradual aesthetic and physical damage to buildings. Very often, such surface changes can lead to structural defects or poor maintenance. In this paper, radiometric analysis of point clouds is proposed for moisture and biofilm detection in building walls. Recent studies show that remote terrestrial laser scanning (TLS) technology is very useful for registering and evaluating the technical state of the deterioration of building walls caused by moisture and microorganisms. Two different types of TLS, time-of-flight and phase-shift scanners, were used in the study. The potential of TLS radiometric data for detecting moisture and biofilm on wall surfaces was tested on two buildings. The main aim of the research is to compare two types of scanners in the context of their use in the detection of moisture and microorganisms.

ALS point cloud filtering involves the separation of observations representing the physical terrain surface from those representing terrain details. A digital terrain model (DTM) is created from a subset of points representing the ground surface. The accuracy of the generated DTM is influenced by several factors, including the survey method used, the accuracy of the source data, the applied DTM generation algorithm, and the survey conditions. This article proposes the use of a new estimation method in the filtering of point clouds obtained from airborne laser scanning (ALS), provisionally called M_split-estimation. The application of M_split-estimation in ALS data filtering requires the determination of the appropriate functional model for the surface, which will be used in the filtering of the set of points. A polynomial terrain surface model was selected for this purpose. Two methods of filtering using the M_split method are presented. The first is based on the estimated parameters of the polynomial describing the surface (called the ‘quality’ approach in the article). The second method (provisionally called the ‘quantity’ method) is carried out in two stages. The first stage is point cloud filtering, which results in two subsets being created. One of these is the subset of points intended for DTM creation, while the other contains the remaining points. The second stage of the approach is the creation of a DTM from the first subset. Since the M_split method has an analytical character, the ATIN method was selected to verify the correct operation of the method. The ATIN method is based on computational geometry and uses repeated Delaunay triangulation and statistical evaluation of the geometric parameters. Comparison of M_split with a method based on different principles mitigates errors arising from similarly functioning methods belonging to the same group of filters. The choice of the ATIN method was also dictated by its established position among filtering algorithms. The method is well-known, documented, and verified and this ensures that filtering by this method provides a reliable result that can serve as a reference for comparison with the proposed new filtering method. The theoretical discussion presented in this article was verified with two practical examples. The results obtained from computation by the M_split method with appropriate terrain models encourage more detailed theoretical and empirical tests of this method for the filtering and segmentation of ALS data-sets.

Interferometric Synthetic Aperture Radar (InSAR) data are often contaminated by Radio-Frequency Interference (RFI) artefacts that make processing them more challenging. Therefore, easy to implement techniques for artefacts recognition have the potential to support the automatic Permanent Scatterers InSAR (PSInSAR) processing workflow during which faulty input data can lead to misinterpretation of the final outcomes. To address this issue, an efficient methodology was developed to mark images with RFI artefacts and as a consequence remove them from the stack of Synthetic Aperture Radar (SAR) images required in the PSInSAR processing workflow to calculate the ground displacements. Techniques presented in this paper for the purpose of RFI detection are based on image processing methods with the use of feature extraction involving pixel convolution, thresholding and nearest neighbor structure filtering. As the reference classifier, a convolutional neural network was used.