For the wafer-scale fabrication of diamond devices, the growth of diamond substrates by heteroepitaxial chemical vapor deposition is the most promising option currently available. However, the transfer of growth and also structuring processes from small homoepitaxial to larger heteroepitaxial samples is not straightforward and requires adaptation. In this study, we present an approach for the fabrication of functional microstructures including pyramids and mesas as well as more complex structures with hollow centers. The associated methods were previously demonstrated by homoepitaxial growth and are now evaluated on heteroepitaxially grown diamond films. After optimizing the growth procedures to ensure a sufficient quality of the bare diamond substrates, precursor structures for overgrowth were fabricated by e-beam lithography and plasma etching. In the overgrowth of nanopillars, a truncated pyramidal shape was achieved. The characterization with scanning electron microscopy revealed the growth of higher-index facets. Nevertheless, photoluminescence spectroscopy reveals localized doping on the sides of the microstructures. In addition, optically detected magnetic resonance reaches a contrast of 6% of one preferred nitrogen vacancy orientation per facet and a transverse relaxation time T2∗ of 96 ns.
Due to fascinating physical properties powered by remarkable progress in chemical vapor deposition of high-quality epilayers, diamond thin films attract great attention for fabrication of nitrogen-vacancy-based solid-state spin systems capable of operating in ambient conditions. To date, diamond heteroepitaxy via bias-enhanced nucleation is an unavoidable method for reliable wafer-scale film manufacturing. In this work, we analyze the coalescence phenomena in nitrogen doped, heteroepitaxial diamond epilayers, with a particular focus on their specific role in the annihilation of macroscopic crystal irregularities such as grain boundaries, non-oriented grains, and twinned segments. Here, we also report on the growth mechanism for the “primary” crystal orientation along with a predominant formation of two different types of boundaries highlighting the {011}-type as a main source of the crystal lattice irregularities.
Heteroepitaxial chemical vapor deposition is the most promising option to fabricate wafer-scale monocrystalline diamonds for quantum applications. Previously, we demonstrated the feasibility to manufacture functional micrometer-sized pyramids on as-grown heteroepitaxial diamond as well as their quantum optical characteristics. Due to high background signals and microfabrication challenges, these pyramids could not compete with homoepitaxially grown structures. In this study, we overcame these problems with a nominally undoped buffer layer between the heteroepitaxial substrate and the pyramidal microstructure to reduce the signal-to-noise ratio from the substrate on the spin measurements of the nitrogen-vacancy (NV) center. Moreover, the microfabrication was improved to reach a higher angle of the pyramidal side plane, corresponding to the {111} facets. These improvements lead to pyramids on which each facet contains almost purely only one of the four possible NV orientations as shown by optically detected magnetic resonance (ODMR). ODMR shows a very high contrast of 19% without an external magnet and of 13% for a single spin resonance in the presence of a magnetic field. The contrast is more than doubled compared to our previous study. The T2* dephasing time of the NV centers of the samples ranges from 0.02 to 0.16 μs. The P1 center is a single substitutional nitrogen center, and the P1 densities range from 1.8 to 5 ppm.
Substrates comprising heteroepitaxially grown single-crystalline diamond epilayers were used to fabricate pseudovertical Schottky diodes. These consisted of Ti/Pt/Au contacts on p Boron-doped diamond (BDD) layers (10–10 cm) with varying thicknesses countered by ohmic contacts on underlying p layers (10–10 cm) on the quasi-intrinsic diamond starting substrate. Whereas the forward current exhibited a low-voltage shunt conductance and, for higher voltages, thermionic emission behavior with systematic dependence on the p film thickness, the reverse leakage current appeared to be space-charge-limited depending on the existence of local channels and thus local defects, and depending less on the thickness. For the Schottky barriers , a systematic correlation to the ideality factors n was observed, with an “ideal” n = 1 Schottky barrier of = 1.43 eV. For the best diodes, the breakdown field reached 1.5 MV/cm.
We deduce equations to calculate coupling coefficients of diamond micro-ring resonators. The equations can be used universally at any wavelength but not limited to the transmission peaks/valleys, and can be adapted with triangular cross-sections and tapered waveguides. Consequently, we build three models in accordance to different diamond processing technologies. These models deal with ring resonators with either rectangular cross sections, or triangular cross sections, or with tapered bus for triangular cross sections. The calculated coupling coefficients can be well fitted by exponential decay functions of gap d. Due to geometrical limitations, triangular-cross-sectional diamond resonators are shown to have much smaller (factor 20) coupling coefficients than those of rectangular-cross-sectional resonators. A tapered bus is shown to be beneficial to increase the coupling coefficient. Besides the calculation of coupling coefficients, the method presented in the paper can also be used to calculate the bending loss of micro-ring resonators, as a complement to the existing methods.