16 June 2023 in Journal of Applied Physics
For the wafer-scale fabrication of diamond devices, the growth of diamond substrates by heteroepitaxial chemical vapor deposition is the most promising option currently available. However, the transfer of growth and also structuring processes from small homoepitaxial to larger heteroepitaxial samples is not straightforward and requires adaptation. In this study, we present an approach for the fabrication of functional microstructures including pyramids and mesas as well as more complex structures with hollow centers. The associated methods were previously demonstrated by homoepitaxial growth and are now evaluated on heteroepitaxially grown diamond films. After optimizing the growth procedures to ensure a sufficient quality of the bare diamond substrates, precursor structures for overgrowth were fabricated by e-beam lithography and plasma etching. In the overgrowth of nanopillars, a truncated pyramidal shape was achieved. The characterization with scanning electron microscopy revealed the growth of higher-index facets. Nevertheless, photoluminescence spectroscopy reveals localized doping on the sides of the microstructures. In addition, optically detected magnetic resonance reaches a contrast of 6% of one preferred nitrogen vacancy orientation per facet and a transverse relaxation time T2∗ of 96 ns.
9 April 2024 in Journal of Applied Physics
Due to fascinating physical properties powered by remarkable progress in chemical vapor deposition of high-quality epilayers, diamond thin films attract great attention for fabrication of nitrogen-vacancy-based solid-state spin systems capable of operating in ambient conditions. To date, diamond heteroepitaxy via bias-enhanced nucleation is an unavoidable method for reliable wafer-scale film manufacturing. In this work, we analyze the coalescence phenomena in nitrogen doped, heteroepitaxial diamond epilayers, with a particular focus on their specific role in the annihilation of macroscopic crystal irregularities such as grain boundaries, non-oriented grains, and twinned segments. Here, we also report on the growth mechanism for the “primary” crystal orientation along with a predominant formation of two different types of boundaries highlighting the {011}-type as a main source of the crystal lattice irregularities.
15 April 2024 in Applied Physics Letters
Heteroepitaxial chemical vapor deposition is the most promising option to fabricate wafer-scale monocrystalline diamonds for quantum applications. Previously, we demonstrated the feasibility to manufacture functional micrometer-sized pyramids on as-grown heteroepitaxial diamond as well as their quantum optical characteristics. Due to high background signals and microfabrication challenges, these pyramids could not compete with homoepitaxially grown structures. In this study, we overcame these problems with a nominally undoped buffer layer between the heteroepitaxial substrate and the pyramidal microstructure to reduce the signal-to-noise ratio from the substrate on the spin measurements of the nitrogen-vacancy (NV) center. Moreover, the microfabrication was improved to reach a higher angle of the pyramidal side plane, corresponding to the {111} facets. These improvements lead to pyramids on which each facet contains almost purely only one of the four possible NV orientations as shown by optically detected magnetic resonance (ODMR). ODMR shows a very high contrast of 19% without an external magnet and of 13% for a single spin resonance in the presence of a magnetic field. The contrast is more than doubled compared to our previous study. The T2* dephasing time of the NV centers of the samples ranges from 0.02 to 0.16 μs. The P1 center is a single substitutional nitrogen center, and the P1 densities range from 1.8 to 5 ppm.
27 November 2024 in Quantum Science and Technology
Planar scanning probe microscopy is a recently emerging alternative approach to tip-based scanning probe imaging. It can scan an extended planar sensor, such as a polished bulk diamond doped with magnetic-field-sensitive nitrogen-vacancy (NV) centers, in nanometer-scale proximity of a planar sample. So far, this technique has been limited to optical near-field microscopy and has required nanofabrication of the sample of interest. Here we extend this technique to magnetometry using NV centers and present a modification that removes the need for sample-side nanofabrication. We harness this new ability to perform a hitherto infeasible measurement - direct imaging of the three-dimensional vector magnetic field of magnetic vortices in a thin film magnetic heterostructure, based on repeated scanning with NV centers with different orientations within the same scanning probe. Our result opens the door to quantum sensing using multiple qubits within the same scanning probe, a prerequisite for the use of entanglement-enhanced and massively parallel schemes.
4 July 2024 in Materials for Quantum Technology
The use of quantum sensors is promising detailed insights into physical phenomena such as magnetism or superconductivity. One example of such quantum sensors is a microscopic diamond tip containing nitrogen vacancy (NV) centers, which is capable of producing correlated measurements of vectorial magnetic fields and the sample topography on the nanoscale. In this study, we present a chemical vapor deposition (CVD) process to produce diamond tips with NV centers by overgrowing microstructured diamond substrates. The resulting diamond tips exhibit a radius of curvature of approximately 10 nm, suitable for use as a probe in an atomic force microscope. The magnetic sensitivity of the CVD-grown diamond tips is characterized with pulsed measurements of the optically detected magnetic resonance, which yield a minimum magnetic sensitivity of 60 µT . The growth of the diamond microstructures is observed to differ from the commonly used geometric model predicting CVD growth of bulk diamond crystals. We identify an empirical model for the growth behavior of the microstructures by taking into account processes described in the step flow growth model for crystals. Additionally, we demonstrate the applicability of the developed CVD growth process to membrane substrates required for the preparation of magnetometry-capable diamond tips.