We have designed, fabricated, and experimentally verified highly sensitive all-dielectric metasurface THz absorbers (AMTAs) device in the terahertz (THz) frequency range. By designing different structures of the resonant, different types of absorber which have perfect absorption can be realised. The proposed AMTA with simplified designs is demonstrated by single-layer all-silicon array. Furthermore, according to the simulated results of absorption frequency changes under different refractive index demonstrate that the proposed AMTAs can act as refractive index sensors in the biochemical application, such as detection of liquid paraffin, cancer cells and ethanol. Also, experiments of detecting different concentrations of 2, 4-Dichlorophenoxyacetic acid (2, 4-D) have demonstrated that the proposed absorbers have great potential to improve the performance in biological and chemical sensing. These results show that the AMTAs can used as sensors, which can detect the presence of trace pesticides and residues of some chemicals in adsorption analyses, among other practical applications.
24 February 2023 in IEEE Transactions on Microwave Theory and Techniques
To improve the terahertz (THz) generation of the interdigitated photoconductive antenna (iPCA), we demonstrate, for the first time, a novel design to pump the emission arrays by reconfigurable structured light generated by a spatial light modulator. The pump light is modulated into shapes to match the antenna’s every other electrode gap which has unidirectional bias field. This design makes full used of the pump power and avoids THz pulses with opposite polarity which causes the unwanted destructive interference in the far-field. Coherent combining efficiencies of THz electric field of 92.23%, 74.94%, and 61.73% are achieved for two-, three-, and five-element pumping, respectively. In addition, real-time phase reversal of THz emission can be achieved by adjusting the pump light location. This system could inspire new and challenging applications in the phase and amplitude control of the THz field, and the enhancement of the THz signal output.
Using terahertz (THz) waves as the communication carrier is an effective way to overcome the blackout when a spacecraft reenters the atmosphere. A blackout plasma typically has a sheath, but the physical mechanism of broadband THz wave propagation and attenuation in sheath plasma has not been clarified. This paper presented experimental and theoretical studies of the propagation characteristics of broadband THz waves in a neon plasma with a sheath for plasma densities ranging from 10 17 m -3 to 10 18 m -3 . The experimental results showed that a broadband THz wave at a frequency of 1.9 THz had a high attenuation of about 22 dB in the plasma. We simulated the propagation characteristics of the THz wave in the plasma, basing on a five-layer plasma model by using the scattering matrix method (SMM). When the sheath plasma density, simulation parameter, was 10 21 m -3 , the experimental attenuation curve of THz wave in plasma was consistent with the simulation curve. This work clarified the determinants of THz wave attenuation in sheath plasma, which lays a foundation for overcoming the black barrier problem.
Most biomolecules are biologically active only in water; hence, it is worth investigating whether THz spectra of biomolecules are affected by the combination of water molecules and biomolecules. In this report, by combining the sample cell with the THz-TDS system, the THz spectra of L-Arginine crystal as well as its hydrate and aqueous solution are measured. The experimental results show that L-Arginine crystal and its hydrate share the same three absorption peaks at 0.99, 1.46, and 1.7 THz, respectively. But the trend of characteristic absorption spectrum of L-arginine solution is almost identical to that of free water. Because the contents of free water and hydrated water are different in many diseased and normal tissues, the diseased tissues can be detected according to the difference in THz spectral information. The proposed approach provides a reliable means for the detection of pathological changes of active molecules and tissues.
nanowires have been fabricated by a sol-gel–hydrothermal method at . X-ray diffraction result shows that the nanowires have a tetragonal perovskite structure. Transmission electron microscopy investigations exhibit that the as-prepared nanowires are single crystalline grains with diameters of about and lengths reaching up to . The ceramics with a relative density of 97% can be fabricated from the high quality nanowires even by a conventional sintering process, which showed that typical characteristics of relaxor ferroelectrics, the indicator of degree of diffuseness and Curie temperature , were 1.65 and , respectively.